Used Pallet Magazine for sale (8,363)

Condition: good (used), machine/vehicle number: 15453, Year of construction: 2000, operating hours: 1,223 h, load capacity: 1,800 kg, lifting height: 220 mm, fuel type: electric, mast type: other, construction height: 1,400 mm, fork length: 1,150 mm, front tire size: , rear tire size: , overall weight: 405 kg, enginetype: Electric, manufacturer: OM Ibedpfez Sg T Sox Ahyec Serial Number: F24520L00030

Condition: used, functionality: fully functional, machine/vehicle number: 710216005433, Year of construction: 1998, load capacity: 1,600 kg, lifting height: 3,000 mm, tire condition: 70 %, overall weight: 800 kg, empty load weight: 800 kg, Equipment: UVV, The Ameise is fully functional and in good condition. Ibjdsz Rmppjpfx Ahyjc

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,401 h, load capacity: 2,800 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, Linde ROTABATT T 28 L for battery replacement of 80-volt batteries, with two battery changing stations. Load capacity: 2800 kg Operating hours: 1401 An inspection can be arranged at any time. Isdsz Rl Tyjpfx Ahyebc Transportation can be organized for an additional fee.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Iodpfx Ahjz Ipx Hjysbc Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled Ibjdpfoz Srtcox Ahysc - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, BT   Model PPS 1200 MX / 1   The BT PPS 1200 MX / 1 is an electrically powered high-lift pallet truck from the manufacturer BT, designed for internal material handling. This model is characterized by its compact design and high maneuverability, making it particularly suitable for use in narrow storage areas, shops, and small production facilities.   Key technical features   Load capacity: 1,200 kg   Lifting height: approx. 2,700 mm   Fork length: approx. 1,150 mm   Drive: 24V electric drive   Battery: 24V   Model from 1999   Operating hours: approx. 356 hours   The pallet truck is still in use, so the actual operating hours may vary slightly at the time of purchase.   Battery renewed in October 2022.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!) Iodpfsziivdjx Ahyebc   We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – Complete VECTOR Model 2000 EUR / EPAL Pallet Production Line (800 × 1200 mm) We are offering for sale a complete VECTOR Model 2000 production line for manufacturing EUR / EPAL pallets (800 × 1200 mm). The line has been in continuous operation since 2018 and has been regularly serviced and maintained, ensuring it is in excellent working condition. To date, it has produced 2,693,462 pallets. Technical Specifications: * Manufacturer: VECTOR * Model: 2000 * Pallet type: EUR / EPAL * Pallet dimensions: 800 × 1200 mm * Production capacity: Up to 300 pallets/hour * Certification: CE * Year of commissioning: 2018 The production line is currently in operation and can be inspected while running at our facility. Detailed technical specifications are available upon request. ===== Complete Vector Model 2000 line for the production of EUR / EPAL pallets 800x1200 for sale. The line has been in continuous operation since 2018, is regularly serviced and maintained in perfect working order. To date, it has produced 2,693,462 pallets. Specifications: Manufacturer: VECTOR Model: 2000 Production of EUR / EPAL pallets Pallet format: 800 x 1200 mm Capacity: up to 300 pallets / h CE certificate Year of commissioning: 2018 The line is in continuous operation – it is possible to view the machine while it is running at our facility. Detailed technical data is available for interested parties. We invite you to contact us and visit us in Andrychów. Ibsdpfxsz Sq Nis Ahysc

Condition: used, machine/vehicle number: --628--OK--, Year of construction: 2016, operating hours: 1,568 h, load capacity: 2,000 kg, load center: 60 mm, fuel type: electric, mast type: other, construction height: 900 mm, battery voltage: 24 V, fork length: 2,400 mm, front tire size: 1, rear tire size: 0,5, overall weight: 1,800 kg, enginetype: Electric, manufacturer: Linde Serial Number: --EK--628--T20AP W4X131G03512 Iedpfx Asz Swppehysbc Battery Details: 24V 3PzS 375Ah, Baujahr 2025 25.1V

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed for demanding industrial storage applications. Its modular high-bay construction makes it ideally suited for logistics centers, industrial operations, large warehouses, and forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 6,000 kg, this immediately available racking system offers an efficient storage solution for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 825 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm Ibsdpfxoz Sq U Sj Ahyjc - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: painted yellow - Uprights: approx. 825 x 105 cm, pre-assembled - Upright color: painted blue - Levels: floor + 4 - Pallet spaces: 270 including floor locations - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 19 x uprights (approx. 825 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 176 x safety pins Price: 5,730.00 € net 6,818.70 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your specific requirements. Whether new installations, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit our showroom! Experience our pallet racks, storage shelves and other solutions in person. Many systems are on display and can be viewed directly. Our expert advisors are happy to assist you with any questions or to provide tailored advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. Our phone number is available on our company page. ☎️ We are available by phone Monday through Friday from 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. Ibsdpfx Ajz Ipdvohyec SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 333 h, Jungheinrich ERC-Z-12 Load capacity 1200kg Year of construction 2002 Battery renewed in 10/2019 Very good condition, has been regularly serviced Only 333 operating hours With Timetronic charger Lifting height 4300mm Free lift 1500mm with inital lift Triplex mast Overall height 1900mm Emergency stop button Iedpsqw Aqdsfx Ahyobc

Condition: like new (used), Year of construction: 2024, 2024 Jungheinrich HPT Inox Hand Pallet Truck Pharma specifications Year 2024 As new condition 2000kg lifting capacity Fork length 1140mm Ibjdpfxez I S Nhj Ahyoc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,700 h, load capacity: 1,600 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 497 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, LINDE T 16 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.600 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 250 Ah v. 2020 Charger: 24 V Tyres: Polyurethan Mono Service weight: 497 kg Length: 1.700 mm Width: 720 mm Year of manufacture: 2020 Operating hours: 4.700 h Condition: working condition Internal no.: 1309304 Ibsdpfxez R Ugde Ahyjc Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm Ibedpfx Ahjz Iq I Aoyoc ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, functionality: fully functional, machine/vehicle number: FN492278, Year of construction: 2015, operating hours: 8,942 h, load capacity: 3,000 kg, lifting height: 7,000 mm, free lift: 2,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, gearing type: hydrostat, battery voltage: 12 V, battery weight: 20 kg, DGUV certified until: 03/2027, fork carriage width: 1,300 mm, fork length: 1,300 mm, ground clearance: 150 mm, tire condition: 50 %, empty load weight: 3,000 kg, total height: 7,000 mm, total length: 2,700 mm, total width: 1,400 mm, Equipment: 4th hydraulic function, cabin, full service history, lighting, sideshift, Impressive working height of approximately 7.0 m; roof height of 2.86 m; inspected and serviced. Ibodpfx Ahez Rt N Njysc

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. Ibodpez Ipwcefx Ahyoc SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,438 h, load capacity: 1,600 kg, fuel type: electric, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 498 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, LINDE T 16 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.600 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 250 v. 2020 Charger: 24 V Tyres: Polyurethan Mono Service weight: 498 kg Length: 1.700 mm Ibodpfxoz R Ugko Ahyec Width: 720 mm Year of manufacture: 2020 Operating hours: 4.438 h Condition: working condition Internal no.: 1309298 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, machine/vehicle number: W41153L00104, Year of construction: 2022, operating hours: 3,050 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 166 Ah Battery voltage in idle state: 25.3 V Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,300 mm Own weight: 900 kg Operating hours: 3,050 h EQUIPMENT Folding platform Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Isdpfx Aoz S Nv Uehyebc Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 397

Condition: used, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,320 mm, loading space width: 2,510 mm, loading space height: 2,650 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 2,700 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Equipment: ABS, General Information Year of manufacture: 2016 Axle Configuration Tire size: 385/65R22.5 Rear axle 1: Tire tread: 60%; Reduction: single reduction Rear axle 2: Tire tread: 70%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Weights Unladen weight: 8,834 kg Payload: 32,166 kg GVW: 41,000 kg Ibedpfx Ahjz S I Uijyec Functional Body brand: Krone Condition Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Year of construction: 2005, condition: excellent (used), ambulance class 3A year of production 2005 Ibodpfsgv U S Aox Ahyoc

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp Ibodpfx Asz Iqp Tjhyjc mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Ibsdsz Iqnvspfx Ahyec Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; Ibsdpsz Irx Nefx Ahysc – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm Ibodpfsz Ip S Hjx Ahyec ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Condition: good (used), Year of construction: 2008, operating hours: 2,059 h, load capacity: 1,800 kg, fuel type: electric, empty load weight: 485 kg, mileage: 2,059 km, Well-functioning Linde T18 electric pallet truck from 2008; Capacity of 1,800 kg; 2,059 hours on the meter; Equipped with battery, external charger, and automatic filling system; Dealer maintained at Linde. Ibedpjw Suz Eofx Ahyoc