Used Pallet Changer for sale (8,430)

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Options: VERY unique WIDE TRACK version equipped with PALLET exchanger!! = Spreader / Rotator / Clamp (Range from 560 to 1700 mm) – Proportional lift & lower valves – Width between support legs 1280 MM!! Kledsx Rudrspfx Ah Nol

Year of construction: 2025, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Changer is a stationary machine for exchanging pallets without manual handling of the pallets. The pallet is fed into the machine using a pallet truck or pallet jack. The machine rotates back 120-degrees with the product and the bottom plate is lowered back down to the ground with the existing pallet to be exchanged with the new pallet. The bottom plate then lifts the new pallet back up under the product and the product is lowered back down, standing on top of the new pallet. The pallet Changer can be delivered with a variety of extra equipment and surface treatments. Kedpew Udqhsfx Ah Nsll Surface treatment is powder coated but can also be delivered in galvanized treatment.

Condition: excellent (used), Year of construction: 2022, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate Y-axis: 6 m/min, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: OiMF, table load: 500 kg, rotational speed (min.): 40 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 400 mm, input voltage: 220 V, pallet changer: automatic, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained Wele HMC500 for sale. The machine was professionally inspected and dismantled by JKET/Wele factory service in week 48. The machine is securely packaged and ready for collection; commissioning by JKET/Wele can be arranged at extra cost. Control powered on: approx. 25,000 hours Machine powered on: approx. 25,000 hours Program run: approx. 8,500 hours Spindle powered on: approx. 8,500 hours Drive powered on: approx. 8,500 hours Axes in motion: approx. 8,500 hours Including: - Touch probe - 4x SK40 tool holders (1x touch probe, 3x tool holders) The machine was used exclusively for machining aluminium. Scope of delivery includes: - 2 pallets with pallet changer (500 x 500 mm) - Table rotation: 0.001 degrees - 2 pallet towers, each with 4 sides and 3 Lang Quick-Point longitudinal clamps per side - Chip conveyor and chip bin included Kodpfx Ahsxyuvqo Njll - Coolant tank (500 liters) and oil skimmer included Feeds: 20/60 m/min Spindle speed: 40–15,000 rpm Motor power: 18.5/22 kW Frequency converter included 500 l coolant tank Oil cooler Only aluminium machining performed on this machine All manuals available

Year of construction: 2013, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 234810, Pallet Changer Mobile sidepress Klodpfew Udiwjx Ah Nsl

Year of construction: 2025, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU. Kljdpfx Aehmfctoh Nsl

Condition: new, Year of construction: 2025, Experience Palletisers & Toppy's fully automatic pallet changer systems, tailored to seamlessly integrate into your production lines, high-bay warehouses, and specific applications. Palletiser & Toppy work closely with system integrators to create customized pallet changer solutions that address your company’s unique requirements. Toppy "Four Press" is one of the safest solutions in our range. It is specially designed for fragile and unstable loads and features four walls (two front and two side) along with optional 'special mats' to secure products during pallet exchange and eliminate any risk of falling. The entire pallet change process is fully automated, ensuring efficiency and safety in your operations. Our in-house R&D team specializes in designing and adapting fully automatic pallet changer systems that fit your workflow, range of products, and specific needs. Whether you operate in logistics, manufacturing, or another industry, Toppy’s solutions provide the ultimate in safety, efficiency, and system integration. Klsdpfxexd Eyhe Ah Nel A fast and simple method to switch between wooden and plastic pallets, or vice versa.

Condition: new, Year of construction: 2025, functionality: fully functional, LTS - Semi or fully automatic pallet changer system. Kjdpfx Ahoxd Erqj Nsll A quick and simple way to switch from wooden to plastic pallets, or vice versa.

Condition: ready for operation (used), Year of construction: 2010, Hänel Stationary Pneumatic Pallet Changer / Pallet Turner Maximum pallet size: 1250mm x 850mm x 2030mm (L x W x H) Press closed: 76.5mm (width) Press opened: 85.5mm (width) Machine dimensions: 1550mm x 2120mm x 2150mm (D x W x H) Fully pneumatic operation. Year of manufacture: 2010 You are welcome to arrange a viewing. Klodpfxjxly Ive Ah Njl We can organize cost-effective shipping for you! You will receive a proper invoice. For customers from abroad, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. The specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Klsdpfx Ahexlctbs Nol Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Initial commissioning on site Training

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Kodjw Stpujpfx Ah Nsll Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Kjdpjdzqmrefx Ah Nsll Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Klodpfx Ahsutuyio Nsl Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis Kedpfxedzqmfo Ah Nell - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: C24V5177, type of input current: three-phase, input voltage: 400 V, overall weight: 1,400 kg, Machine in perfect condition, very little used. It turns over the pallet with load and returns empty pallet allowing you to change it easily. For example for changing plastic to wooden pallets for replacing broken pallets with new ones. 2 pcs available, price / pc. Kljdpevahymofx Ah Njl You can find manufacturer's video attached but we can also make a recording for you. Pallet changer, pallet turner, pallet inverter.

Condition: excellent (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 3316,10, load capacity: 1,200 kg, total length: 2,200 mm, empty load weight: 1,380 kg, maximum load weight: 1,200 kg, fuel type: electric, gearing type: automatic, color: black, tire condition: 99 %, construction height: 1,100 mm, fuel: electricity, > No need to tilt, turn, or flip the product; > Exchanges all product types; > Maximum capacity up to 1200 kg; > Exchanges up to 40 pallets/hour; > Pallets up to 1000 x 1200 > No special areas are required for pallet exchange. > Minor visual signs of wear. Kljdpfx Ahot Rd Dls Njl We are happy to inspect the system on-site. Upon request, we can also conduct a test with your own pallets/products at our factory to determine its functionality.

Year of construction: 2022, condition: excellent (used), Pallet inverters or pallet changer is used to change loads, goods from one pallet to other pallets. Change loads from wooden pallets to plastic pallets, transfer goods from euro pallets to chep pallets or euro pallets to Dusseldorf pallets. It can handle bags, big bags, carton boxes, cans, yogurt, bottles etc. This type: FS In very good condition Capacity: 2000 kg Kedpjg Rmfaofx Ah Nsll Loading tables; 1200 *1200 mm Max. opening 2200 mm Control: electrical

Year of construction: 2006, condition: excellent (used), Pallet inverters or pallet changer is used to change loads, goods from one pallet to other pallets. Change loads from wooden pallets to plastic pallets, transfer goods from euro pallets to chep pallets or euro pallets to Dusseldorf pallets. It can handle bags, big bags, carton boxes, cans, yogurt, bottles etc. Kledpfehkzuijx Ah Nsl Capacity 1500 kg Max opening 2200 mm Min opening 820 mm Platform 1200 x 1200 mm Power 400 V Three Phase ‐ 5,5 Kw Rotation Hydraulic Functioning By push‐buttons panel Performance 20 pallets / hour Loading Allowed by pallet jack

Condition: used, Vertical Machining Center MAZAK VTC-20B – Year of manufacture: 1998 • CNC Control: Mazatrol M Plus • Axis Travels: X = 1660 mm, Y = 510 mm, Z = 510 mm • Spindle: • Taper: ISO 40 • Max speed: 7,000 rpm • Power: 7.5 kW • Tool Changer: • 24-position automatic tool changer • Feed Rates: • Rapid traverse on all axes: 30,000 mm/min • Table: Kljdpfowdrftjx Ah Njl • Size: 2000 x 510 mm • Max load: 500 kg • Cooling System: • Standard integrated system • Dimensions & Requirements: • Footprint: approx. 3200 x 2700 x 2800 mm • Weight: approx. 5200 kg • Compressed air: 6 bar • Note: Machine in full working condition, available for inspection on request

Year of construction: 2011, condition: excellent (used), Pallet inverter, pallet changer, pallet turner Gives the possibility to turn pallets with load and to replace the pallet. f. i. from wooden pallets to plastic pallets, or to change broken pallets under a pile of goods, without unstaple and staple by hand. Kledpfxsgyk Uhs Ah Nel

Condition: new, Year of construction: 2025, Hand pallet truck 2000 kg LWPW with weighing system, new 2025. Continuous stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All deliveries are offered at trade prices in AS-IS condition without warranty. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance, as we are not always present. Kljdpox Td Dtjfx Ah Nsl Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Premier Pallet Inverter / Turner Ksdpowkhnqefx Ah Nsll Model FS1600 Max opening - 1575mm, Min opening 900mm Max capacity load 7,000kg Load tables dimensions 1300mm x 1250mm Cycle time 45 seconds Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure Recover damaged materials from the bottom of a load Replace wood pallets with plastic, aluminum, or other more hygienic pallets Transfer materials from a damaged pallet Change orientation for printing and other general purposes

Condition: excellent (used), Year of construction: 2018, Premier Pallet Inverter / Pallet Turner Year 2018 Kljdpfewt S N Rex Ah Nol Electrohydraulic operation Maximum opening 1875mm Minimum opening 1050mm Load capacity 2000kg Safety fencing included The FS 1900 Pallet Inverter Primary Uses: Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure

Condition: excellent (used), Gas tank on pallet for oxygen, argon, nitrogen, carbon dioxide, CO2, LNG, LOX, LAR, LIN Volume 2 m3 working pressure 20 bar Kjdpfx Ahsvyf Unj Noll vacuum isolation We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.

Year of construction: 2017, condition: excellent (used), Pallet Changer. The concept of this is to provide totally hands-free pallet exchange and Premier have made constant improvements to this system over the last 10 years to make it the versatile unit it is today. A great number of Pallet Changers sold to date have been to the pharmaceutical industries and although it is the most expensive machine in Premier's inverter range, it has proved to be ideal in eliminating manual handling. Can handle loads up to 2050mm high, 1500 kgs weight. Klsdpjp Am Shsfx Ah Nel Floor fixed guards with photobeams at the front. Handles all conventional sized pallets. To totally avoid manual handling, two pallet stackers can be placed to the side of the Pallet Changer.

Condition: used, Year of construction: 1989, functionality: fully functional, Available in 3 versions: 1 Electric pallet table Kodpfevwkwisx Ah Njll -Capacity: 1000kg -Lifting height: 77cm -380v 2 Electric pallet table -Capacity: 500kg -Lifting height: 77cm -380 V 3 -Electric pallet table -Capacity 1000kg -Lifting height 77cm -230V