Used Pallet Lift Tables for sale (40,086)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Fpsdpfxoz Iqp Tj Akysn Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Year of construction: 2018, operating hours: 1,410 h, lifting height: 3,300 mm, free lift: 1,220 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 1,740 mm, color: other, GVW: 1.782 kg Fodjz Nh Nbepfx Akyopn Lifting capacity: 1.200 kg NEW BATTERY CELLS 24V 3PzB 300Ah, FUNCTIONS LIKE NEW! 220V high-frequency charger, SIDESHIFT, Fork length 1150 mm, Power steering, Space between forks 670 mm,

Condition: excellent (used), lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor lift table, WTT Fördertechnik, Series E 10.10.5.1.0.RB, Roller conveyor length: 2500 mm Platform width: 600 mm (rollers 550 mm) Load capacity: max. 1000 kg Useful lift: max. 1350 mm Total: 7 units Fjdpfxsv Acnkj Akyjpn Sold individually Equipped with non-driven support rollers made of precision steel tube, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Installation length of the support rollers (width): 550 mm Roller conveyor height in the transfer area: 280 mm Lifting time: approx. 15 sec. Foot protection contact strips Hand-held switch on a 3 m long cable Automatic stacking protection - by slightly lifting the platform, the support rollers are automatically braked. Foldable inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: good (used), Year of construction: 2002, machine/vehicle number: 35789 + 35790, Offer 21478 Technical data: - Operation via handheld remote control with cable - Total load capacity approx. 2000 kg - Load capacity per table approx. 1000 kg - Platform made of aluminum with various threaded holes - Platform size approx. 2800 x 1800 mm Fpedpszc Hc Nsfx Akyen - Min. lifting table height approx. 280 mm - Max. lifting table height approx. 1100 mm - Lifting stroke approx. 820 mm - Hydraulic drive, each 400 V / 1.1 kW - Separate control cabinet - Separate hydraulic unit with wall mounting bracket - Space requirement approx. W 2850 x D 1850 x H 280 mm - Weight approx. 800 kg

Condition: excellent (used), lifting height: 1,050 mm, load capacity: 500 kg, total length: 1,350 mm, working height: 1,050 mm, operating pressure: 200 bar, power: 0.75 kW (1.02 HP), lifting time: 8 s, Scissor lift table, WTT Fördertechnik, Series E 05.08.5.1.0.RB, Equipped with non-driven support rollers made of precision steel tubing, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Roller track length: 1350 mm Installation length of the support rollers (width): 550 mm Platform width: 600 mm Roller track height in the transfer area: 280 mm Load capacity: 500 kg Useful lifting height: 1050 mm Lifting time: approx. 8 sec. Foot protection contact strips Hand-held push button Overload protection: installed via a cable pull brake on the roller track frame. Integrated hydraulic unit: 0.75 kW, 200 bar Operating voltage: 400 V, 50 Hz Fpedpfx Aev Acn Rskyen (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, Mechanical scissor lift table with roller device - welding positioner, vessel rotator Ideal base for 3D welding table Load capacity 800 kg (maximum load with fixed castors) Load capacity 2000 kg (maximum load without fixed castors) Platform size 1800 x 860 mm Usable lift max. 690 mm Table height - bottom position 770 mm (without top frame) Table height - top position 1460 mm (without top frame) Table height - bottom with locking bolt 830 mm (without top frame) Table height - top with locking bolt 1080 mm (without top frame) Top frame height 80 mm Load capacity of rotator approx. 400 kg Roller spacing / axle spacing 155 to 685 mm Axle distance to top frame 190 mm Roller diameter 100 mm Roller width 40 mm Fjdpfx Asx U Eh Nskyopn - Scissor lift table is ideal as workbench, assembly fixture, welding table base, or with vessel rotator for pipe welding - Mobile on 4 polyamide rigid castors Ø 125 mm, 2 of which are swiveling with brakes - Height adjustment via trapezoidal screw spindle and hand crank - 4 locking bolts for height adjustment, hole spacing 50 mm - Removable table top with forklift pockets - Roller spacing of polyurethane rollers on rotator adjustable in perforated pattern - Very robust construction made of square profiles with 5 mm to 10 mm wall thickness Required space (L x W x H): 1800 x 860 x 1200 mm Weight without rotator 470 kg Weight with rotator 620 kg Very good condition

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 300 mm, lifting height: 950 mm, load capacity: 1,000 kg, total length: 1,650 mm, total width: 630 mm, table width: 600 mm, roll diameter: 70 mm, power: 1.1 kW (1.50 HP), roll width: 600 mm, In total - 10pcs. Fpedpfxewgwkto Akyen

Condition: used, Year of construction: 2007, total height: 890 mm, total length: 2,000 mm, total width: 2,000 mm, Colour: Blue Empty weight: 400 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: HL8445 Fpodsyrb Uxopfx Akyon - Transport dimensions: 2000mm x 2000mm x 890mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet Fodpsphup Aofx Akyjpn

Condition: as good as new (ex-display), Year of construction: 2023, Technical description with the following main data: Load capacity 3000 kg static line load effective stroke 1100 mm Overall height 250 mm Total height 1350 mm Platform length 1700 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 29 sec. for the full effective stroke Lowering time depending on load Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 2.2 kW, 1,400 rpm. Valve voltage 24 V DC Sealing class IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Fjdpfjupztzjx Akyopn Control box dead man's control incl. 2 m cable Total weight approx. 455 kg Floor frame for moving with pallet truck or forklift

Condition: new, table length 855 mm table width 500 mm stroke height 900 mm Fsdpeupw Uhjfx Akyepn 340 mm weight max. in kg 500 kg weight of the machine ca. 0,085 t 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, table length 820 mm Fpedjupxlujpfx Akyjn table width 520 mm stroke height 730 mm weight max. in kg 300 kg 260 mm weight of the machine ca. 0,065 t dimensions of the machine ca. 1,0 x 0,6 x 0,82 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: good (used), Year of construction: 2018, Last one of 6 high-lift pallet trucks, electric reach stacker 2t, Jungheinrich, ERD 220 – used: Special price as this is the last unit and the lifting height is only approx. 1.66m: Price ex-works: only €2,950 (net) instead of €5,500 (net)! Manufacturer: Jungheinrich Type: ERD 220 Year of manufacture: 2018 and 2022 Lifting height: approx. 1.66m Overall length: 2,084 mm Width: approx. 77cm Fork length: approx. 1.19m 24 V Travel speed: 12.5 km/h Working aisle width (pallet 800x1200 lengthwise): 2310 mm Lifting speed without load: 0.32 m/s Operating hours: see list, as of January 2026 – a few hours have been added since then Incl. charger Weight incl. battery approx. 1,200kg Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Pos: 8 / 2 / 39 / 31 / 20 / 21 – more photos of the other units available upon request! BH 1/26 Year of manufacture ERD02 90548601 High-lift pallet truck ERD 220 8,060 2018/4 Fsdpeyrrlzjfx Akyepn ERD04 90548603 High-lift pallet truck ERD 220 7,685 2018/4 ERD05 90548609 High-lift pallet truck ERD 220 5,500 2018/4 ERD06 90548610 High-lift pallet truck ERD 220 8,743 2018/4 ERD07 90569686 High-lift pallet truck ERD 220 4,384 2018/10 98350674 High-lift pallet truck ERD 220 1,951 2022/3

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 MACHINE DETAILS Dimensions & Weight Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. Fpedpjzwn S Tjfx Akysn The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: new, table length 2000 mm Fodpfsv Htkdex Akyjpn table width 1000 mm stroke height 400 - 1010 mm weight max. in kg 300 kg weight of the machine ca. 220 kg

Condition: good (used), Year of construction: 2015, operating hours: 80 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, mileage: 80 km, This pallet truck from the German brand STILL is from 2015 and is in good condition. Capacity is 2,000 kg as a pallet truck and 800 kg when lifted to height; ONLY 80 hours on the meter; Forks are 1,150 mm long. Equipped with INITIAL LIFT, making it ideal for uneven floors. The 2015 battery comes with an INTERNAL charger and an automatic filling system. Fpodpfxsxp Nf Ee Akyen

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: E.05.08.6.1.0.RB, total length: 1,350 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, type of input current: three-phase, working width: 600 mm, working height: 1,050 mm, Scissor lift table, WTT Conveyor Technology. Equipped with non-driven support rollers made of precision steel tubing, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Fedezyfwxopfx Akyopn Support roller spacing: 150 mm Roller track length: 1500 mm Installation length of the support rollers (width): 550 mm Platform width: 600 mm

Condition: used, Electric pallet truck, low-profile lift truck, "Ameise" (ant), drawbar stacker JUNGHEINRICH Type EJE 116 Serial No.: 98008311, Year of manufacture: 2010 Rated load capacity: 1600 kg Lifting height: 200 mm Fork length: 1150 mm Fsdpfoyr R Dvjx Akyspn Operating voltage: 24 Volt Overall length: 1750 mm Overall width: 730 mm Overall height with drawbar: 1300 mm - Battery from 2013, Type 24V 2 PzS 230 (24 Volt, 230 AH) - Battery automatic charger Jungheinrich 24 Volt, 30 Amp. - 2399 operating hours recorded. Weight approx. 560 kg Good condition

Condition: used, Electric pedestrian stacker, low-lift pallet truck, powered pallet jack, tiller stacker JUNGHEINRICH type EJE 116 Serial no.: 90316421 Year of manufacture: 2008 Rated capacity: 1,600 kg Lift height: 200 mm Fork length: 1,150 mm Operating voltage: 24 Volt Fpsdpfx Ajyr R Dpekysn Overall length: 1,750 mm Overall width: 730 mm Overall height with tiller: 1,330 mm - Battery from year 2013, type 24V 2 PzS 250 (24 Volt, 250 Ah) - Automatic battery charger Jungheinrich 24 Volt, 25 Amp. - 3,818 operating hours recorded Weight approx. 560 kg Good condition

Year of construction: 2002, condition: used, functionality: fully functional, Hydraulic scissor lift table with separate hydraulic power unit lifting capacity 3000 kg Platform size 1100 x 3500 Fjdpfeymfmujx Akyepn Min. height 450 mm Max. height 2500 mm Handheld controller

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Fpjdpoz Ipclefx Akysn Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2005, condition: excellent (used), Tabletop dimensions 200x100cm Lifting capacity 5t NO HYDRAULIC PUMP Fodpfx Akopq Imnoyepn price for 1 piece

Condition: new, A mobile workstation with fast,individual height adjustment. About onePedal is operated the hydraulic unit,this is a stepless adaptation to thedesired working height the base frame can be differentWorktops are placed. Theseare fixed with 4 socket lift table has a steel worktop and willdelivered with 4 swivel castors, 2 of them are withParking hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 970 x 590 mmTotal height: 1010 mmWeight: 135 kgRahmen: 970 x 590 mmGes. height: 1010 mmweight: 85 kg Fpsdovwf Rqopfx Akyen

Condition: good (used), Year of construction: 1978, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck -Manufacturer: i-lift, hydraulic scissor lift table trolley, scissor lift trolley type FH 3/6T -Load capacity: 300 kg -Platform: 600 x 600 mm -Dimension when retracted: Height 590 mm -Extended dimension: Height 1310 mm -Quantity: 1x scissor lift truck available -Transport dimensions: 810/600/H980 mm Fodpfoz A Tq Aex Akyspn -Weight: 105 kg

Year of construction: 2025, condition: good (used), functionality: fully functional, Height-adjustable table frame modules for individual use with various panels and superstructures. The upper rails are designed for Demmeler / Siegmund plates with 28 mm holes, sized 3000 x 1500 mm. Electro-hydraulic height adjustment: 650 - 1050 mm. Load capacity: 2,000 kg. Fpedpfey Axvvox Akyon