Used Pallet Lift Tables for sale (40,280)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 1,178 h, load capacity: 1,800 kg, fuel type: electric, battery capacity: 150 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 474 kg, total length: 1,750 mm, total width: 720 mm, fuel: electricity, STILL EXU 18 – Electric low-lift pallet truck Kdodpfx Ahjz Aqqpsbou TECHNICAL DATA Lifting capacity: 1.800 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 150 Ah v. 2020 Charger: ohne/without Tyres: Polyurethan Tandem Service weight: 474 kg Length: 1.750 mm Width: 720 mm Year of manufacture: 2008 Operating hours: 1.178 h Condition: working condition Internal no.: 1309238 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW Kdodpfx Ahjl Nbqcsbsu mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Year of construction: 2014, condition: new, All types of new Papro lifting tables, electric/manual, mobile and stationary! Most are in stock and available for immediate delivery! From table size 700mm x 450mm to 8000mm x 4000mm, 150KG - 10,000KG. Table size 850 x 520, lifting height 850mm / load capacity 300KG. Table size 1010 x 520 / 500 KG / 800 KG. Table size 1600 x 1140, 1000 KG. Table size 1600 x 1200, 2000 KG. Table size 1300 x 800, 1000 KG. Table size 1200 x 1700, 4000 KG. U-shaped, size 1450 x 1140, 1000 KG. Constructed from European components. CE certified. 1 year full warranty. We also supply all sizes and types not listed here at competitive prices. See photos. Call or email us with your request. Tel. or also available on Saturdays and Sundays from 9:00 to 22:00. Kodpfxsf Tnyve Ahbsdu

Condition: good (used), Year of construction: 2014, operating hours: 766 h, Electric high-lift pallet truck with operator platform, Manitou – used: Kdjdpszp Rzzjfx Ahbsu Price ex-yard: only €2,395 (net)! Manufacturer: Manitou Model: Manilec Type: ES507S15 PFR6 Year of manufacture: 2014 Serial number: 941824 Lifting height: 1.47 m Rated load capacity: 700 kg Operating hours: approx. 766 h Weight: approx. 1,240 kg 24V Battery weight: min.: 189 kg / max.: 304 kg Condition: good Available: immediately Location: Leipzig

Condition: used, Year of construction: 1985, Palettenheber - Pallet Lift ButlerYear 1985 Kdsdpfx Aeh Ayd Iohbsu Tagfähigkeit / Lifting Capacity 1.200KGS Hub / Lifting high 1.000mm Pressluftanschluss / Air supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2024, total height: 2,100 mm, lifting height: 2,200 mm, empty load weight: 3,000 kg, load capacity: 4,500 kg, Lifting frame for timber packages 1200 x 1200 3000 - 6000 mm Kdsdpfxsr Ddbge Ahbju 5 lifting arms Max. load 4 to Dimensions width: 2500 mm length: 5000 mm height 2100 mm Stroke: from 550 - 2200 mm Gear motor 400 V 3 KW

Condition: good (used), Year of construction: 2016, operating hours: 4,806 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, mast type: simplex, empty load weight: 800 kg, mileage: 484 km, MULTIPLE UNITS IN STOCK Kdedjy R Af Dopfx Ahbju Electric pallet truck with lift function Brand: Still (Germany) Year of manufacture: 2016 4,806 operating hours Capacity: 2,000 kg as pallet truck, 800 kg as stacker Lift height: 800 mm INITIAL LIFT, ideal for uneven floors. DUO function Battery with external charger and automatic filling system.

Condition: used, Wide-track high-lift truck, pedestrian stacker, drawbar stacker HANSELIFTER - Hanse-Lifter, Model E-SDJ1016-01 Wide-track lift truck Standard model. Year of manufacture: 2014 Rated load capacity, drawbar stacker: 1000 kg Load capacity, special attachment GIESLER: 200 kg Rated lifting height: 1600 mm Fork length: 530 / 770 mm Fork carriage width: 950 mm Ground clearance under wheel arms: 130 mm Operating voltage, hydraulic unit: 12 volts Overall height: 2160 mm Overall length: 1650 mm Overall width: 1860 / 1200 mm - Manual drive operation Kdodpfx Ahohxvuwsbou - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1650 mm (width between wheel arms) - 1 piece, 12-volt battery - Separate charger, 12 volts, 15 amps - Fork base carrier on lifting frame made of steel - Fork carriage, special attachment GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Fork tines made of stainless steel, total length 770 mm to pivot plate - Fork tines cannot be lowered to the ground due to the special attachment (approx. 170 to 250 mm depending on track width) Self-weight: 485 kg Like new condition

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Ksdpsz Iq I Asfx Ahbodu Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: ready for operation (used), Year of construction: 2025, lifting height: 1,000 mm, load capacity: 1,000 kg, Translyft lifting table. Model TL 1000B 1000 kg capacity. 1 year old (2025). Lifting height: 1000 mm. Kedpfx Asy Ubtushbedu External dimensions: 1300 x 800 mm. Manufacturer's documentation included. 3 lifting tables available, sold as a set or individually.

Year of construction: 2013, condition: good (used), Scissor lift table with powered roller conveyor – used Price (net) ex works: only €1,500, disassembled and loaded! Manufacturer: Schwinghandl Year of manufacture: 2013 Kedpsfwr Uqofx Ahbsdu Type: Roller conveyor / Scissor lift table Length of roller conveyor: unknown Element width approx. 75cm Roller length: approx. 68cm Roller width: approx. 5cm Element height: approx. 15cm Lifting height: currently approx. 78.5cm Motor: SEW Condition: good Available: immediately Location: Zwickau, later warehouse in Frankenberg (Saxony)

Condition: used, machine/vehicle number: 008207, Max. panel width: 2200 mm Max. panel length: 3300 mm Max. panel stack height from the ground: 690 mm Kdjdpex A Tiuefx Ahbou Lifting capacity: 7000 Kg

Condition: good (used), Year of construction: 2015, operating hours: 6,342 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, mast type: simplex, empty load weight: 800 kg, mileage: 6,342 km, MULTIPLE UNITS IN STOCK Electric pallet truck with lift function Brand: Still (Germany) Year of manufacture: 2015 6,342 hours Capacity: 2,000 kg as pallet truck 800 kg as stacker Lift height: 800 mm INITIAL LIFT, ideal for uneven floors. DUO function Battery equipped with external charger and automatic refill system. Kdjdpfx Asy R Afkohbsu

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 1,200 kg, lifting height: 3,000 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 601 kg, -KOM 3159- Offered here is a used electric pallet truck from the manufacturer Linde. Manufacturer: Linde Year of manufacture: 2014 Load capacity: 1200 kg Unladen weight: 601 kg Battery voltage: 24V Drive power: 1.2 kW Operating hours: approx. 72,090 h Kjdjxb Rynspfx Ahbodu Max. lifting height: approx. 3,000 mm Fork length: approx. 1,150 mm

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg Kodon Hbbuepfx Ahbodu -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Kodpfsz Ipwcsx Ahbedu FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: new, table length 910 mm table width 500 mm table height 350 - 1300 mm weight max. in kg 350 kg 950 mm stroke height 1300 mm weight of the machine ca. 110 Kg dimensions of the machine ca. 100 x 550 x 400 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. Kodoupxlhepfx Ahbedu There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: good (used), Year of construction: 2015, operating hours: 6,154 h, load capacity: 2,000 kg, lifting height: 800 mm, fuel type: electric, mast type: simplex, empty load weight: 800 kg, mileage: 6,154 km, MULTIPLE UNITS IN STOCK Electric pallet truck with lift function Brand: Still (Germany) Year of manufacture: 2015 6,154 operating hours Capacity: 2,000 kg as a pallet truck, 800 kg as a stacker Lifting height: 800 mm INITIAL LIFT – ideal for uneven floors. DUO function Kdedpfx Ahjy R Ad Tsbeu Battery equipped with external charger Automatic refill system

Condition: excellent (used), Year of construction: 2025, lifting height: 800 mm, load capacity: 1,000 kg, Translyft lifting table. Model TUB 1000. 1000 kg capacity. Kodpfx Aoy Ubtnjhbedu 1 year old (2025). Can lift up to 800 mm. External dimensions: 1450 x 1085 mm. Manufacturer's documentation included. 4 lifting tables available, sold as a set or individually.

Condition: used, Electro-hydraulic scissor-fork high-lift stacker Scissor lift stacker, fork lift stacker for pallets Ksdpsg D H Ivefx Ahbedu TOYOTA / BT, model HTH 10 E Serial No. 481795, year of manufacture 2005 Load capacity 1000 kg Lifting height max. 800 mm Overall height in lowered position 85 mm Fork length 1190 mm - Electric lifting via 12-volt battery operation - Manual lifting via hand lever, similar to a standard lift truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - With single roller - Integrated charger (mains voltage 230 volts, with standard plug) Own weight 140 kg In good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,760 mm, conveyor belt width: 730 mm, conveyor belt speed: 180 mm/s, total length: 2,000 mm, total height: 1,000 mm, overall weight: 150 kg, input frequency: 50 Hz, motor manufacturer: WEG, Equipment: emergency stop, TAF item number: 1000006117 Manufacturer: Herzog + Heymann Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,000 x 960 x 530 mm Width including side frame in mm: 820 Kjdoy D T Ddopfx Ahbodu Width including drive unit in mm: 820 Side frame height in mm: 80 Conveyor length in mm: 1,760 Conveyor width in mm: 730 Belt type: Smooth, blue Belt width in mm: 730 Substructure: Included, lifting substructure (H: approx. 530–1,000 mm) Running surface: Wood Drive: Head drive Motor type: Geared motor Motor manufacturer: WEG Motor specifications: 150 W / 50 Hz / 22 rpm Motor position (in conveying direction): left Conveying speed in m/s: 0.025 – 0.18 Net weight in kg: 150 Special features: manually height-adjustable, stepless speed control, emergency stop, castors, incl. CEE 16A plug Condition: used / fully functional Functional test: OK

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Electric pallet truck from Italian manufacturer OMG Model: LOGOS AC Year of manufacture: 2016 Kdsdpfsxw Nv Tjx Ahbsu Lifting height: 4115 mm Nominal load capacity: 1200 kg The truck is in very good condition and has seen little use.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,443 h, load capacity: 2,000 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,200 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 644 kg, total length: 1,800 mm, total width: 720 mm, fuel: electricity, STILL EXU - H 20 – Electric low-lift pallet truck Kedjz Aqf Tspfx Ahbodu TECHNICAL DATA Lifting capacity: 2.000 kg Fork length: 1.200 mm Drive: Elektro 24V Battery: 24 V 250 Ah v. 12/2026 Charger: ohne/without Tyres: Polyurethan Tandem Service weight: 644 kg Length: 1.800 mm Width: 720 mm Year of manufacture: 2017 Operating hours: 3.443 h Condition: working condition Internal no.: 1309239 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding Kdodpfoz Ipr Hsx Ahbsu F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: new, The lifting table for larger xibility as it should be, your desired oneCountertop on the one you wantWorking lift table can be with the one you wantBe equipped and through the plateFoot pedal can be adjusted to your desired height.4 sturdy Polyamit castors, two of them withParking brake, ensure ideal handling.A safeguard against slipping the tablegives you the necessary sense of hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 1200 x 740 mmTotal height: 1010 mmWeight: 150 kg Kdedpjvxa Nqefx Ahbsu