Used Opti B 33 Pro for sale (86,757)

Condition: ready for operation (used), Philips 4022 226 3391 CETR PROC MOD-8 card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Chodpji Ecf Nsfx Ab Tof

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Automation system of the Wittmann brand was newly installed in 2016 and used on a Netstal Synergy 2000. All documents, operating instructions, maintenance plans, measurement diagrams etc. included as well as control modules, power supply units and control panels. The Wittmann Picker can be used as a stand alone. Codopm Htgspfx Ab Tohf TECHNICAL DETAILS travel X / Y / Z: 900 / 1800 / 3000 mm payload: 15 kg Scope of delivery: robot, console, support V/2614-3104, adapter, conveyor system standard MB belt, SE protective enclosure incl. safety door with SIPA MACHINE DETAILS dimensions plant (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE mains voltage: 400 V tolerated voltage fluctuations: up to 10% connected load: 11 kVA frequency: 50-60 Hz tolerated frequency fluctuations: up to 2% supply line fuse: 16 A air pressure: max 6 bar maintenance of system functions: up to min 5 bar

Condition: used, mileage: 486,558 km, power: 294 kW (399.73 HP), first registration: 01/2011, fuel type: diesel, color: white, axle configuration: 6x4, tire size: 385/65/r22,5, fuel: diesel, wheelbase: 3,900 mm, gearing type: mechanical, emission class: euro5, suspension: steel, loading space width: 2,520 mm, loading space length: 4,170 mm, loading space height: 500 mm, Year of construction: 2010, Equipment: crane, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 10.516 cc Drivetrain Drive: Wheel Chedewvrl Dspfx Ab Tef Make of engine: MAN Transmission Transmission: 16 gears, Manual gearbox Axle configuration Suspension: leaf suspension Front tyre size: 385/65/r22,5 Rear axle 1: Tyre size: 315/80/r22,5; Double wheels Rear axle 2: Tyre size: 315/80/r22,5; Double wheels Weights Empty weight: 18.560 kg Carrying capacity: 7.440 kg GVW: 26.000 kg Functional Mast: telescopic (5 parts) Make of bodywork: HIAB 377 E-5 HIPRO

Condition: ready for operation (used), Philips 4022 226 3382 CENTR PROC MOD card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Chodpei Ecfzsfx Ab Tsf

Condition: new, Leuze electronic MA 204i Profibus gateway / modular connection unit, FE: DPS V1.1.1.0 , SN:22335 ,unused, 100% functional, scope of delivery according to photos Cjdpolpkumjfx Ab Tshf

Condition: ready for operation (used), Philips 4022 226 3381 CENTR PROC MOD card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Chsdpfx Abei Ecfwe Tof

Condition: ready for operation (used), Philips 4022 226 3390 CENTR PROC MOD-8 card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cjdpoi Ecf Eefx Ab Tehf

Condition: good (used), Year of construction: 1998, Surface sanding machine Fabr.ABA Type: ECOLINE 1006 Bj.1998 with Abamatic 1 N.D. Sanding area max : length 1000 mm width 600 mm height 500 mm Magnetic table size : 1000 mm X 500 mm . Chodpfx Absvbb Iyj Tjf Paper belt filter, various accessories Further data see data sheet . Complete machine documentation available. Machine in good condition

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Chsdpfxex Dmbae Ab Tsf Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: reconditioned (used), Universal tool milling machine Brand: harich (DECKEL) Model: B (FP 2) Refurbished with CE certification Geometric inspection with test protocol Cododvdczspfx Ab Tjhf With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start and stop buttons - New documentation for machine and control cabinet - CE Declaration of Conformity

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Cjdpexcgytsfx Ab Tohf

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Misc.accessories Chsdpfx Abemmdhrs Tsf MARCELS MASCHINEN CH

Condition: good (used), Diamond core drilling machine -Drill stand -Vacuum pump -Water pump tank Csdpfeb A H U Asx Ab Tohf -Core drill: Ø 15/20/3x 25/3x 28/32/40 mm

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new Optitek PUR High-Pressure Foaming Machine -- Model HD-Compact OPT PP 40/40 -- Chedpfxex Dcctj Ab Tjf The compact high-pressure foaming unit from Optitek is a true space-saver. This technically advanced system, measuring 210cm x 210cm, is built on a base frame with integrated drip trays. Despite its minimal footprint, the system is designed for easy maintenance and user-friendly operation. To meet stringent quality demands, OPTITEK GmbH exclusively uses original parts from renowned global market leaders. Compliance with the highest safety standards is, of course, a given. The extensive standard equipment includes, among others: >> Ergonomic control panel featuring a high-quality 15" touchscreen from the latest generation >> Control cabinet cooling >> Comprehensive process data acquisition >> High dosing accuracy thanks to state-of-the-art pump technology >> Day tanks including material temperature control, with a 250-litre capacity >> Gear agitator on the polyol side, including an angled-blade stirrer >> Automatic filter with scraper-cleaning >> Compact mixing head hydraulic unit with integrated cooling We are always available for any questions you may have and look forward to your enquiry.

Condition: used, functionality: unexamined, Ferwood Code: RU0009348 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Chjdpfx Asv Hzukob Tsf

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet Codpfx Aovfdatjb Tohf - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Cellulite reduction - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Codpfx Aorxri Sjb Tshf Laser density: 8 MW/cm² Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Item condition: Used, good condition Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Csdsxy Nf Hjpfx Ab Tshf Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Rational iCombi Pro LM100GE AXXXX combi oven from 2021, in excellent condition. The iCombi Pro is Rational’s flagship model, designed for high-performance steam, convection, and combination cooking with intelligent programming and precise controls. Technical specifications: • Model: LM100GE AXXXX • Power: 63.7 A • Voltage: 3NAC 400V • Frequency: 50/60 Hz • Water pressure: 150–600 kPa • Protection class: IPx5 • Serial No: L2252J1I223320086 • Connectivity: LM1 • Made in Germany • Year: 2021 Features: Codex Ad U Uspfx Ab Tshf • Multi-functional combi cooking (steam, convection, combination mode) • Precise temperature and humidity control • Intelligent cooking programs • Hygienic stainless steel construction • Touch control interface • Easy cleaning system • High energy efficiency Condition: • Excellent overall condition • Fully functional • Very clean inside and out Machine is ready for operation and available for inspection.

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Codpewnn U Ejfx Ab Tjhf -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro 8300S black-and-white production system. Item for sale: 1 x Ricoh Pro 8300S with the following equipment: Includes Vacuum Feed LCIT RT5100 Includes Finisher SR5110 Not the right equipment? No problem, we can configure the machine to your requirements. Just get in touch! Meter readings: Total: approx. 801,843 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Chjdpfx Asw Rwmheb Tof A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol Chedpsx A T Evsfx Ab Tof with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Chsdexcgygjpfx Ab Tof

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C7200X colour production system. Item for sale: 1 x Ricoh Pro C7200X with the following equipment: Includes Fiery Server E-45A Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 6,418,669 pages Colour: Approx. 5,377,744 pages Black: Approx. 1,040,925 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Cedpfx Absxx Iz Rs Tshf Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Chsdpfx Abjw R Spqj Tsf