Used Oil Water Separation Systems for sale (48,983)

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants Gujdpfxezt Sb De Ak Ueg For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled Gujdpfx Aezr Ircek Usg • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Gjdszxxifjpfx Ak Ujug Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: like new (used), functionality: fully functional, empty load weight: 900 kg, maximum load weight: 5,000 kg, overall weight: 6,000 kg, tire size: 300 x 80, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2025, Water tank trailer, 5000 liters - 25 km/h, with ABE (German type approval) Ideal for municipal services (gardening department), civil engineering, road construction for dust control, construction site supply, agriculture, or as a professional water tank for large companies – anywhere where water is needed on site. Equipped with a mounted wide-spreading nozzle and spray bar with nozzles. Gusdpfx Akjzy Dy Ee Uog Coupling height approx. 700 mm. Automatic support wheel with folding mechanism. PTO pump for filling and emptying. Additional PTO pump for operating a high-pressure cleaner. As-new demonstration unit from 2025. Please send us your realistic offer. VAT can be shown separately.

Year of construction: 2026, condition: new, machine/vehicle number: AT111, New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142°C (industrial steam ~6 bar), Cooling 142→27°C (water at 17°C), Final cooling 27→25°C (water at 17°C)Balance tank: 200 L, vertical cylindrical, AISI 304 stainless steel, with 3 level probes and CIP spray ballProduct pump: Stainless steel centrifugal, special high-temperature mechanical seal, operating pressure 5–10 barElectromagnetic flow meter: Flanged, 4–20 mA outputHot water circulation group: High-efficiency pump, 14–16 bar, 10,000 L/h; stainless steel expansion vessel; safety valve; automatic refill; steam–water tubular heat exchangerTemperature regulation: Pneumatic modulating steam valve; high-efficiency steam trapOn-board CIP: Conductivity measurement, 2 chemical dosing pumps, 2 x 150 L AISI 304 tanks (acid and caustic)Construction: Pre-assembled on AISI 304 stainless steel skid with adjustable leveling feetAdvanced Automation & Control SystemsThe system is equipped with a modern automation platform to ensure stable UHT processing, traceability, and consistent product quality.Control architecture: Integrated PLC with a 12-inch HMI touch screenCabinet layout: Two AISI 304 stainless steel enclosures (electronics and pneumatics separated)Electronics cabinet: PLC, HMI, power and automation componentsPneumatics cabinet: Solenoid valves and air distributionAutomated functions: CIP cycle management, pasteurization/sterilization control, temperature regulation, alarm handling, safety interlocksProcess data logging: Continuous monitoring of temperatures, product pressure, holding time, and flow rateInstrumentation: Electromagnetic flow meter with 4–20 mA output for robust feedback controlProduction Line Integration CapabilitiesDesigned for seamless integration into dairy processing, beverage production, and industrial packaging en... Godpfxszmpznj Ak Ueug

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series utilizes scroll technology, which involves no metal-to-metal contact between the compression elements; consequently, absolutely no oil is required in the compression chamber. This makes the system ideal for applications requiring completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compression elements have recently been overhauled or replaced. Total operating hours: 15,983 hrs (actual running time of the compressor since 2001). Controller hours: 99,527 hrs (time the control system was powered on). Runtime of individual scroll elements (compression stages) Operating hours Element 1: 735 hrs Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical Data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil-Free Air) Serial Number: ATI 502157 Maximum Operating Pressure: 8 bar(e) Free Air Delivery: 24.7 l/s Rated Shaft Power: 14.8 kW Rated Shaft Speed: 1500 rpm Gsdpfx Aozwmd Uok Uoug Gross Weight: 590 kg Year of Construction: 2001 Control System: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "A one-stop solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, total width: 2,920 mm, total length: 5,720 mm, total height: 3,360 mm, maximum load weight: 50 kg, heating capacity: 59 kW (80.22 HP), warranty duration: 6 months, input frequency: 50 Hz, year of last overhaul: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Maximum loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Guedpfx Aoy H Uzvok Ujg Loading station with transport trolley 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz - switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable), including lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large separate oil separator. - Automatic cover on Tank 1 - Media filtration in all tanks (via cartridge filter) - Complete system enclosed and with exhaust extraction - Control system: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Electrical connected load: 59 kW The system can also be dismantled and re-installed at a new location by our specialist technicians for an additional charge, if required. Water treatment for Tank 4 (final rinse) can be supplied at extra cost. Test cleaning possible at any time, the system is powered up.

Year of construction: 2006, condition: ready for operation (used), Offered is a Ruma cleaning centrifuge system with cooling unit and pump system for cleaning cooling lubricants, grinding oils, emulsions, wash water and process fluids. Max. achievable cleanliness level: approx. 1µm, suitable media: oils, emulsions, cooling lubricants, wash water, process fluids, max. rotor speed: 3620rpm, rotor diameter: 310mm, max. solids capacity: 12kg, main motor power: 2.2kW, filter aids: not required, separation principle: solid-liquid separation by centrifugal force. Machine weight: 400kg. Documentation available. Inspection possible by arrangement. Gjdpfszhb E Ijx Ak Ujug

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng KYDB204 disc stack centrifuge / 3-phase separator. Manufacturer: Juneng Machinery Model: KYDB204 Type: disc stack centrifuge / centrifugal separator Separation: liquid-liquid-solid / 3-phase separation Drum diameter :242(mm) Rotary speed: 8086(r/min) Motor model and power: Y112M-4-B5 4KW Capacity: 0.5-2m3/h(depend on material condition ) Power: 4(KW) Dimension（L*W*H） 830*610*1150(mm) Weight: 580(kg) Degree of automation :Automatic cleaning and slag discharging Dimension: 810*968*1139mm(L*W*H) Material: stainless steel, according to manufacturer specification Condition: new / unused Application: oil-water-solid separation, liquid clarification, fine separation Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Europe can be arranged The Juneng KYDB204 is a compact industrial disc stack separator designed for continuous liquid-liquid-solid separation. It is suitable for applications where oil, water and fine solid particles need to be separated in a closed centrifugal system. Typical applications: edible oil clarification vegetable oil / crude oil polishing oil-water separation fuel / lubricant treatment fine chemical liquid separation food and beverage liquid clarification industrial process liquid separation Main advantages: compact disc stack centrifuge design continuous operation closed inlet and outlet system high-speed centrifugal separation fine separation of liquid phases and solids stainless steel execution according to manufacturer specification suitable for integration into existing process lines The machine is offered as new equipment through an EU seller. Delivery, documentation and final technical confirmation can be arranged before order. Technical details to be confirmed according to final product application. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng KYDB204 Tellerzentrifuge / 3-Phasen-Separator. Neue Juneng KYDB204 Disc-Stack-Zentrifuge zur kontinuierlichen Flüssig-Flüssig-Feststoff-Trennung. Geeignet für Öl-Wasser-Feststoff-Trennung, Pflanzenölklärung, Prozessflüssigkeiten, Lebensmittel-, Chemie- und Industrieanwendungen. Kapazität: ca. 2.000 l/h, abhängig vom Produkt und Prozess Motorleistung: ca. 4 kW Ausführung: Edelstahl gemäß Herstellerspezifikation Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung nach Europa kann organisiert werden Technische Details und Eignung bitte je nach Anwendung final bestätigen. Gsdpfozlby Hex Ak Ujug

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Guodpfx Aezzrutsk Usg Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Gedpfx Akjgryk Ne Usug strip thickness: 10 - 20 mic

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² Gjdsy R Aldspfx Ak Usug HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: used, This listing is for a Ortho Diagnostic Systems Cellwasher 2 Ortho Diagnostic Systems Cellwasher 2 for automated red blood cell washing and separation in immunohematology laboratories. Gedpfx Ajxzhc Hsk Ujug

Condition: used, mileage: 618,500 km, power: 235 kW (319.51 HP), first registration: 01/2014, fuel type: diesel, number of seats: 45, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * MAN A 20 * Lion's City Articulated Bus * First registered in 2014 * Second owner (German) * FINAL PRICE * Repair history available since 12/2019! * 235 kW / EURO 5 - EEV * Retarder * AIR CONDITIONING * Tow hitch * Various folding windows * VIDEO SURVEILLANCE SYSTEM installed * DOUBLE GLAZING * Convector heater * 95 km/h * Excerpt from the repair history: * The work was carried out externally in specialized workshops - invoices are of course available! * Major oil change at 604,526 km (06/30/2025), at 604,525 km - solenoid valve, rear axle, right side, replaced, * On 05/17/2025, the steering damper was replaced (front axle, right), water pump replaced, brake caliper (rear axle, right), coolant cooler replaced, * Invoice for 10,200 EUR from MAN / Neoplan authorized workshop available from 10/2024, including replacement of shock absorbers (front axle), air suspension bellows (front axle, left and right), dust cover (front axle, left and right), transmission oil, etc. * Invoice for 4,554 EUR for new combination cylinder, combustion chamber, heat exchanger, circulation pump, etc. * Replace front axle brake line, reseal compressor and power steering pump, * The customer is obliged to independently verify the condition and equipment of the goods / vehicle! Gjdpfx Akjxc Ax Se Uoug * etc. * Vehicle may be in use / mileage and condition may vary * All information without guarantee * Subject to prior sale * We refer to our general terms and conditions.

Condition: good (used), functionality: fully functional, Steinheil KONTUR 408-2/D Optoelectronic Contour and Shaft Measurement System High-precision Steinheil KONTUR 408-2/D optoelectronic contour and shaft measurement system with high-quality Jenoptik optics The system is designed for non-contact, high-precision, and rapid measurement of rotationally symmetric components (e.g., shafts, camshafts, turned parts) The device scans the measurement object non-contact using the shadow image principle. Rotational measurements are recorded with up to 1,440 measurement points on the circumference per measurement location. Evaluation and quality control are performed directly via integrated SPC (Statistical Process Control) software based on Windows NT, featuring clear tolerance bars and diagrams The system is housed in a closed aluminum profile enclosure with a transparent protective cover and is safeguarded by professional safety light curtains System Overview Operating Principle: It scans workpieces non-contact using the shadow image principle. Main Application: Fast and precise measurement of complete workpiece contours and shafts in industrial settings. The Measuring Unit (KONTUR 408): Vertical measuring setup with integrated IR LED illumination and sensor technology Measuring range: Diameters from 4 to 85 mm, workpiece lengths up to 400 mm Drive & scales: Brushless servo motors and high-precision Heidenhain scales The device is housed in a sturdy aluminum profile frame with transparent protective panels and Sick safety light curtains. The control& IT Infrastructure: A rugged 19-inch control cabinet (Rittal) houses the VME bus process computer. A separate PC workstation controls data analysis and visualization (historically designed for Windows NT). A wide range of standard interfaces on the rear panel (including RJ-45 network, serial COM ports, parallel LPT2 printer port, AUI interfaces, and BNC coaxial connectors) Gsdszz Hwvjpfx Ak Uoug Technical Specifications: Manufacturer: Steinheil Model: KONTUR 408 Diameter measurement range: 4 mm to 85 mm Length measurement range: up to 400 mm Diameter resolution: < 0.5 µm Length resolution: 0.5 µm Rotation resolution: 0.018° Measurement Accuracy (at 20°C): Diameter: ± 2 µm; Length: ± [5 + L [mm] / 100] µm Sampling Rate (Scans): 2,000 per second / 5,000 per mm Measurement Times: 10 to 50 seconds (depending on the number of test features) Measuring Systems / Scales: High-quality Heidenhain scales (length & rotation) Drive System: Brushless DC servo motors (controlled via Elmo NBA 10/200RH amplifiers) Process Computer: VME bus computer in a Rittal cabinet Data Analysis/Visualization: PC workstation (designed for Windows NT) Illumination: IR LED system (service life approx. 50,000 hours) Protection rating: IP 54 Operating temperature: +10 °C to +45 °C Dimensions (W x H x D): approx. 590 x 900 x 380 mm Weight: approx. 100 kg (plus peripherals/cabinet) Installation: Desktop unit / tabletop setup “Everything from a single source: We’d be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de

Condition: used, Year of construction: 2021, functionality: fully functional, System for oiling and staining solid wood flooring / parquet flooring Manufacturer: Cosma Year of manufacture: 2021 Working width: 400 mm Passage heights: 10 - 50 mm Part lengths: from approx. 700 mm Gusdpozzdm Iefx Ak Ueg consisting of: - Roller application machine, manufacturer: Cosma, type 400 RC equipped with 1 rubber-coated application roller, approx. 25 Shore, and 1 metering roller for applying oil Feed speed adjustable, 3 - 15 m/min. with stainless steel collection tray for easy cleaning during material changes with electric height adjustment and mechanical height indicator - Spreader machine, manufacturer: Cosma, type 400 2P2S (year of manufacture: 2021) 1x spreader pad, 0.37 kW, rotating to the left 1x spreader pad, 0.37 kW, rotating to the right 1x spreader brush, 0.37 kW, speed infinitely adjustable 100 - 300 rpm, co-rotating, electric height adjustment 1x spreader brush, 0.37 kW, speed infinitely adjustable 100 - 300 rpm, counter-rotating, electric height adjustment - 1x pad brush cleaning machine and 1x longitudinal brush cleaning machine, manufacturer: Cosma, type CU Pad + CU Brush

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Godpfx Asz Agw Eok Usug - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Gujdpfxez Ag Rre Ak Ujg - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Guodezi N Dhspfx Ak Ujg Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Condition: excellent (used), Year of construction: 2019, Containerized boiler system HOVAL MAX-3 Output: 1750 kW Guedpfxozp R Nfj Ak Ueg Year of manufacture: 2019 Burner: ELCO

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg Gedpfsd Sninjx Ak Usug The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. Gedpfx Aewc Nrnek Ujug The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Year of construction: 2025, condition: like new (used), The separator is designed for screening topsoil / humus. Screening and mixing of compost, sand, or other materials can be performed in a single operation with the Terra-Star. The four shafts deliver an impressive throughput when screening and mixing. The shafts are fitted with wear-resistant HX 500 star discs. When wear occurs, the discs can be re-welded at any time. The Terra-Star is a modern, forward-thinking system that already provides the foundation for tomorrow’s adaptability. Switching to other carrier machines is always possible, as all components are bolted. The shafts can also be converted for other applications at any time, for example, from screening shafts to mixing shafts or to any other combination. Required adapters for excavators or wheel loaders are, of course, available upon request directly from us. Price without mounting plate. Mounted is a Lehnhoff quick coupler, which can be retained or purchased separately. Price MS 03: €420 For excavators from 2.2 t Guedoya Uu Ispfx Ak Ujg For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h Leak oil connection required: 0 Series: TSE.054.104

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Godpfxoy D Rk Ie Ak Ujug Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Guodpfx Aoya Uuzjk Usg Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h No leakage oil connection required Series: TSE.054.087