Used Motorized Decoiler for sale (22,938)

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t Dodpfx Aebh Sz Sob Tjcr mandrel Ø: 450 mm

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-Roll Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Double pre-bending. Working width: 1330 mm. Top and bottom roll diameter: 90 mm. Lateral roll diameter: 95 mm. Plate thickness capacity: 2 – 2.5 – 3 mm. Dcsdofh Skpopfx Ab Tor (1.5 x D, 3 x D, 5 x D) Top and bottom rolls are motorized with identical power output. Side rolls are motorized for vertical movement (up/down). Front opening for the top roll. Rolls are induction hardened to HRC 55/60, 2 mm depth. Special bearings for the side rolls. External lever for roll tilt adjustment. Sheet clamping with bearing-equipped device. 2-pedal foot control. Electrical cabinet compliant with CE regulations. Millimeter scale for sheet clamping readout. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with complete double pre-bending and front-release system. The top roll is stationary, while the lifting/lowering movement is applied to the side and lower rolls. Sheet clamping is simple: after inserting the sheet between the top and bottom rolls, the bottom roll lifts to secure the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Machine includes: - Front conical bending device on the top roll. - 2 digital readouts for side roll positions. - Roll grinding/turning after hardening treatment. - Roll hardening.

Condition: used, carrying force: ca. 50 kg tape width: bis ca. 50 mm Dodpoc Rf Sljfx Ab Tjcr tape exterior-Ø: 750 mm engine: 400 V, 390 Upm, 0,25 kW space needed: 850 x 600 x 1350 mm weight: ca. 100 kg

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 Dcsdpfxjxd Rgmo Ab Tjr - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: good (used), Year of construction: 2000, Offer 24510 Technical data: - max. load capacity with horizontal table top 500 kg - Flat plate diameter 850 mm - Through hole / hollow shaft 200 mm Dsdjvfc Sujpfx Ab Tocr - Faceplate motorized left + right swivel 0 - 90 ° - Rotation infinitely variable approx. 0.06 - 2.4 1/min - Right + left rotation - E. foot switch for faceplate rotation - E. foot switch for swiveling face plate left + right - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 850 mm - Space requirement approx. W 1450 x H 850 x D 1000 mm - Weight approx. 900 kg - 4 jaw chucks

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm strip thickness: 0,4 - 8 mm coil weight: 13 t Dcjdpfxebh S Dyj Ab Tjr mandrel Ø: 508 mm

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm Dsdpfx Absxd Rgas Tecr - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Dsdpfxoxc Ei Ho Ab Tecr Technical data: - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute - Rear area safety guard - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg

Year of construction: 1975, condition: used, strip width: max. 450 mm Dcodpfxsbh S E Ee Ab Tjr strip thickness: 0,2 - 4 mm coil weight: 5 t mandrel Ø: 406/508 mm

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm Dcodpstpnldsfx Ab Tor - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: C3-0203, Offer 24508 Technical data: - Load capacity 100 kg - Faceplate diameter 500 mm - Through opening 155 mm - Faceplate manually infinitely tiltable left + right - Rotation infinitely adjustable by motor - Right + left rotation - Electric foot switch for start - stop - Table height in horizontal position approx. 940 mm Djdpovtn A Uefx Ab Tocr - 3 jaw chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2025, machine/vehicle number: 9010003, Offer 24195 Technical Specifications - Max. working width 2050 mm Dodpfjv Tx Hdjx Ab Tjcr - Max. sheet thickness at 400 N/mm² without pre-bending: 4 mm - Roller diameter 115 mm - Drive 400 V / 4.5 kW - Handheld remote control - Space required approx. W 2800 x H 1250 x D 1150 mm - Weight approx. 2200 kg

Condition: good (used), Year of construction: 1984, Offer 24126 Motorized bar turning machine + ring and bending machine Technical data: - Bending process mot. with automatic or manual operation - Bending capacity square bars ST 37 up to approx. 30 mm - Bending capacity flat bars ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twisting length 10 x material thickness (long side) - Bending time preselection / bending length preselection - Right - left rotation - Tailstock - Arch + ring bending device GRB 66 with various roller sets - Bending capacity - flat steel 60x10 mm high R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 ½" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roller sets steel 1 ¼" , plastic 1 ½" - Standard roller set Dsdpfxjr Ik N De Ab Tecr - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 201238, Offer 17230 Technical data: - Load capacity 3600 kg - Faceplate diameter approx. 1050 x 1050 mm - Faceplate motorized, swiveling + rotating - Faceplate speed electrically infinitely adjustable 0.2 - 1 rpm - Motorized right + left rotation - Hand remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm Dcedpfx Aov Hbzkob Tsr - Weight approx. 3500 kg - Hand remote control

Condition: good (used), Year of construction: 1970, machine/vehicle number: 30740, Offer 23465 Technical data: - max. working width 1040 mm - max. material thickness (at 40 kg strength) 3.5 mm - Table width 300 mm - stand projection 100 mm - working height 880 mm - Front angle stop Dedsrci T Espfx Ab Tecr - 3 additional front support arms - Back fence manually adjustable 5 - 550 mm - Drive 400 V / 5.5 kW - E. foot switch - Space requirement including back gauge, without front support arms - approx. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Condition: used, Year of construction: 1975, machine/vehicle number: 4005, Order No. 24330 Technical Specifications: - Asymmetrical roller arrangement, tiltable lower roller Dodpfswhwz Ujx Ab Tjcr - Folding bearing for sheet removal - Max. working width 2040 mm - Max. sheet thickness approx. 2.5 mm - Roller diameter 137 mm - Working speed right + left 6 m/min - Motorized feed of the rear roller - Rear roller stroke approx. 80 mm - Emergency stop foot switch - Roller drive 3.5 kW - Feed drive power 2 kW - Space requirement approx. W 3200 x H 980 x D 900 mm - Weight approx. 1.5 t

Condition: good (used), Year of construction: 2008, machine/vehicle number: 82-N-001, Offer 24248 Technical data: - max. working width 3050 mm - max. sheet thickness 5 - 6 mm - Roller diameter 200 mm - Stroke of front roller 200 mm - Working speed 4 m/min - Drive - brake motor 400 V / 7.5 kW - Space requirement approx. W 4900 x D 1300 x H 1400 mm - Weight approx. 5.0 t - with - two driven rollers - both bottom rollers motorized adjustable - bending - Hinged bearing for swiveling out the top roller - Extended roller ends for attaching profiled rollers - right + left rotation Dcodpfotu Ul Rox Ab Tor - separate mobile control panel with foot switch + digital display

Condition: used, Year of construction: 1993, machine/vehicle number: 2410, Order No. 25075 Technical Specifications: - Load capacity 1000 kg - Faceplate diameter 800 mm - Motorized tilting faceplate - Continuously adjustable electrical rotation 0 - 250 cm/min - Welding current transmission 650 A Dcodpfxswi H D Is Ab Tsr - Drive 400 V / 2.8 kW - Table height in horizontal position approx. 1100 mm - Right and left rotation - Space requirement approx. W 1200 x H 1100 x D 1500 mm - Weight approx. 850 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: N 74-1057, Offer 24454 Technical data: Dsdpfx Absuzvpce Tscr - max. cutting width 2520 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1°15 - throat depth 200 mm - Stroke rate up to 30 /min - front angle fence 1100 mm - front support arm 400 mm - mot. back gauge 5 - 600 mm - cutting line lighting - Sheet support - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3750 x H 1650 x D 2100 mm - Weight approx. 3.8 t

Condition: good (used), Year of construction: 1986, machine/vehicle number: 8618030, Offer 25182 Technical Data: - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm - Rear roller and bottom roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right + left: 6 m/min - Drive: 380 V / 6.2 kW Dcodpfxswq It Ts Ab Ter - Space requirement approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - With: - asymmetrical roller arrangement - crown-turned naturally hardened rollers - manual adjustment of rear rollers - pre-bending - pivotable top roller - electric foot switch for right and left rotation

Condition: good (used), Year of construction: 1991, machine/vehicle number: D 206806, Offer 25076 Technical specifications: - Driven unit, fixed + guided unit, movable on rails Dodpfxjv Srgzo Ab Tscr - Total load capacity 3000 kg - Load capacity per container device 1500 kg - Container diameter 100 - 2500 mm - Adjustment of the container diameter - By pivoting the support arms, locked with locking pins - Roller diameter 250 mm - Continuously adjustable rotation speed approx. 60 - 1200 mm/min - Min. distance / max. distance between fixed and movable unit - 1090 / 3200 mm - Separate control cabinet - 400 V drive - Space requirement approx. W 4300 x H 900 x D 1600 mm - Total weight approx. 1200 kg

Condition: used, Year of construction: 2000, Lg.no. 24489 Technical data: - Load capacity ( vertical ) 100 kg - Flat plate diameter 400 mm - Passage opening 60 mm - Face plate manually steplessly tiltable 0 - 135 ° - Rotation infinitely variable motorized 0.05 - 5 m/min - E. foot switch for start - stop - Table height in horizontal position without rollers approx. 750 mm - 3 jaw chucks - Drive 220 V Dedpfx Abju Uqbke Tjcr - Space requirement approx. W 450 x H 850 x D 650 mm - Weight approx. 60 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 43910, Offer 25177 Technical specifications: - Max. working width 1030 mm - Max. material thickness at 40 kg strength per mm²: 1.50 mm - Roller diameter 65 mm - Swiveling top roller - Asymmetrical roller arrangement - Rear roller tiltable for conical rounding - Front roller adjustable with lever and eccentric Dsdpfxewmngxo Ab Tjcr - Bottom roller + rear roller with wire insert groove - Electric foot switch for left-right rotation - Drive 400 V - Space required approx. W 1500 x H 1250 x D 500 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 313406334, Offer 24236 Technical specifications: - Max. working width 2550 mm - Max. cutting capacity St 40 4.0 mm - Cutting angle 1.30° - Position-controlled backgauge 20 - 750 mm - Front angle stop + support arms - Electric foot switch - Stroke rate up to 34 per minute depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm Dcedowd Nu Sspfx Ab Tjr - Space required including backgauge, without front support arms - Approx. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm or up to 28 mm Ø in steel at 10 mm Dodpfewuqprjx Ab Tscr or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: - stop table with adjustable stops - electric foot switch - machine base - various punches with die