Used Mobile Spray Wall for sale (13,549)

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Ibedpfjzzvhdsx Apceb Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Iodszinzljpfx Apcsbb Weight 45 kg Good condition

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Ijdpfxezgw Tlj Apcjbb Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance.

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Ibedpozhblnsfx Apcob Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: Iedjzil T Sopfx Apcebb ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW Iedpfx Ajx E Rdwjpcsbb - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: used, Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central discharge outlet and manually operated valve. Machine is mounted on an integrated frame with 4 wheels and an electrical cabinet equipped with an frequency inverter. Specifications: Capacity: 577 L Type of stainless: AISI 316L and on the jacket AISI 304 Internal Pressure: -1 bar Internal Temperature: 110°C Jacket Pressure: 3.5 bar Diameter: 880 mm Straight Side: 800 mm Type Of Heads: Dished top and bottom Legs/Lugs: Legs with wheels Iedpfx Apozbuhwecsbb Weight: 620 kg

Condition: ready for operation (used), Various heating oil, VA containers and VA tanks are available. 1) Vertical VA tank with 5 feet, volume: 40m³, diameter: approx. 2500mm, height: approx. 6000mm. 2) Vertical VA tank with 5 feet, volume: 25m³, diameter: approx. 2500mm, height: approx. 4000mm. 3) Vertical VA tank with 5 feet, volume: 35m³, diameter: approx. 3000mm, height: approx. 5000mm. 4/5) Two double-walled VA tanks, volume: 50m³, diameter: approx. 3800mm, height: approx. 5500mm. Including agitator. 6) Transport tank mounted on container frame with 3 separate chambers, chamber volume: 4m³, total volume: 12m³, drain: central, cleaning: via spray heads. 7) Heating oil tank, volume: 30m³, diameter: approx. 2500mm, length: approx. 8000mm. 8) Heating oil tank, volume: 10m³, diameter: approx. 2000mm, length: approx. 4000mm. A further 7 (8-14) partly mobile V2A tanks with volumes from 1m³ to 11m³. A further 5 built-in VA sheet metal storage tanks, each with a volume of 20m³. Documentation available. On-site inspection is possible. Ibodpfx Apstwqzxecob

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MiR 200 December 2018 – used but in perfect working condition Iedpfoun Sq Uex Apcsbb Length: 890 mm Width: 580 mm Height: 352 mm Weight (unladen): 62.5 kg Loading surface: 600 x 800 mm Robot payload: 200 kg (maximum 5% incline) Towing capacity: 500 kg (see separate MiRHook 200 datasheet) Endurance: 10 hours or 15 km Maximum forward speed: 1.1 m/s (4 km/h) / reverse: 0.3 m/s (1 km/h) Battery: Li-NMC, 24 V, 40 Ah; charging time: up to 3 hours (0-80%: 2 hours) WiFi: Dual-band wireless AC/G/N/B SICK S300 laser scanners (x2): 360° visual protection around the robot Intel RealSenseTM 3D Camera: Object detection in front, 50-500 mm from the floor Ultrasonic sensors (x4): Detection of transparent objects in front, e.g. glass doors Safety compliance and certifications: EN 1525, PLd cat. 3, ESD approved and CE certified Price €13,000.00 (+VAT)

Condition: excellent (used), Year of construction: 2014, ZIM Hülsta back wall saw Make: ZIM Hülsta-Werke Designation: Back wall saw Year of manufacture: 2014 Serial number: 380114008 Description: 2 movable Benz sawing/boring units Feed roller table Protective housing with Leutze laser cabinet system Ibedpfovdb Tbex Apcjb Switch cabinet Extraction piping Control terminal, consisting of: PC, flat screen EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel tray (beige) Financing through our bank is also possible. komplett-konzept.leasingo.de Further items - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Ibedpfxsrt Uy Ne Apcjb Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), functionality: fully functional, overall weight: 24,000 kg, Year of construction: 2022, operating hours: 3,092 h, Gasparin GI5000R – Mobile screening plant on a tracked chassis Performance features Production capacity: approx. 400 t/h Hydraulically tilting screening box 93 kW (126 hp) 4-cylinder diesel engine, emission stage V Robust heavy-duty construction: Only the screening box vibrates, not the chassis or the conveyor belts Proportional valve with load-sensing system to optimize hydraulics and reduce fuel consumption by approx. 30% Easy loading onto a low-bed trailer thanks to the favorable chassis angle of 16° Technical data Screening unit Double-deck vibrating screen Vibrating screen with two decks Screen area: 4,000 x 1,400 mm Feed area Feed hopper: 6 m³ Folding side walls Conveyor belts Feed conveyor belt: 1,200 x 3,500 mm, adjustable speed Overflow conveyor belt: 1,200 x 5,000 mm, hydraulically folding, adjustable speed Discharge height: 3,420 mm Collection conveyor belt: 1,200 x 3,300 mm Conveyor belt for medium grain: 800 x 7,700 mm Hydraulically folding Discharge height: 3,530 mm Conveyor belt for fine grain: 800 x 7,700 mm Hydraulically folding Discharge height: 3,680 mm Drive 4-cylinder diesel engine with constant speed Power: 126 hp / 93 kW Emission standard: Stage V Iodezbrclopfx Apcobb Further technical data Maximum feed particle size: 600 mm Operation via control panel Tracked chassis: 400 x 2,920 mm Operating weight: 24,000 kg Transport dimensions Transport length (with folded overflow conveyor belt): 11,730 mm Transport width: 2,550 mm Transport height: 3,200 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, AMR MiR500 – Year 2018 – in excellent condition General specifications Payload: 500 kg Dimensions: 1350 mm (length) x 920 mm (width) x 320 mm (height) Maximum speed: Up to 2.0 m/s (with speed upgrade kit) Acceleration: 1.0 m/s² (with full payload) Unladen weight: 250 kg Navigation and safety Navigation: Autonomous, equipped with laser scanners and 3D cameras for 360° vision and obstacle avoidance Safety: ISO 13849-1 compliant, with 5 integrated safety functions and emergency stop Minimum turning radius: 2200 mm (standard) Minimum doorway width: 1950 mm (normal operation) Power and battery Battery: 48V Li-NMC, 2 kWh capacity Charging: Compatible with MiRCharge 500, cable charger, or MiRCharge 48V Charging time: Approx. 1 hour for 10–90% charge using MiRCharge 48V Connectivity and I/O Connectivity: Dual-band WiFi (AC/N/G/B) and Ethernet with Modbus protocol I/O: 4 digital inputs, 4 digital outputs Safety I/O: 8 digital inputs, 5 digital outputs Environmental conditions Operating temperature: +5°C to 40°C Storage temperature: -10°C to 60°C Humidity: 10–95% non-condensing Price: €16,500.00 (+VAT) Iedpoxxzbdofx Apcsbb

Year of construction: 2017, condition: good (used), Danmatic Spray unit Ibodpfxjuanvco Apcsb spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Ibodpfx Apouccw Hjcob Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Ibodpfozht Smex Apcob Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2026, condition: new, Galvanized on request. 1. Rotary screen, 1600 mm, length 2800 mm, 4 mm woven wire (others on request), perforation 20x20 mm, drum speed approx. 13.5 RPM, 4 kW, 2. Undersize material elevator. 9000 mm long, 650 mm wide, up to 2300 mm high, 3. Hopper with a length of 3300 mm, a width of 1500 mm with adjustable belt speed via a variable speed drive, 4. Semi-mobile. Mounted on a chassis with wheels and a lower (removable) trailer coupling (without or other – on request), 5. Cleaning brush with a diameter of 300 mm, length 2000 mm, 6. Drum drive via a gear motor + 2 rubber drive wheels with a diameter of 230 mm, 7. Supports with adjustable height, 8. Discharge height (oversize) from the drum 1000 mm, 9. Overall height with brush 3100 mm, overall width 2600 mm, overall length 9700 mm, 10. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 11. Total power supply 9.2 kW, 12. CE certificate, 12 months warranty, manufactured in the EU (Poland), 13. Capacity approx. 50 t/h (topsoil), 14. Weight: approx. 3 tons. 15. Tramec durable gear motor (with speed control in the hopper), 16. FAG and SKF roller bearings, 17. Structures made of closed steel profiles – steel grade S355, 18. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 19. Drum construction is protected against corrosion – hot-dip galvanizing (!), 20. Drum structure – S355 steel. Wall thickness 3 mm, perforation to be agreed (option), 21. Brush with adjustable spring. The brush pressure can be adjusted, 22. Electrical sockets and emergency stop switches on both sides of the machine, 23. Drum covers. Powder-coated in the paint booth. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length – on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English, and Russian. Ibedjd Rz T Espfx Apceb

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. Ijdpfx Apszmyviocebb 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Iodpjvtzzksfx Apcebb Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: used, machine/vehicle number: 7033, Year of construction: 1984, operating hours: 21,102 h, 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Ibedpfx Aezcbmiopcob Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Traglast. 20.000 kg Antrieb. Diesel 4x4 max. Traglast. 20.000 kg bei 3 m, 1.700 kg Traglast bei max. Ausladung 18 m, Gesamtmasse des Kranes 22.400 kg, Transportabmessungen 10,86 m x 2,50 x 4,0 m Drehbereich 360°, Radformel 4x4, Hydraulische Federung Hubraum 6086 cm³, Leistung. 89 kW (121 PS) bei 2500 U/min Motor. 6-Zylinder Deutz Dieselmotor, wassergekühlt Getriebe. 4- Stufen- Automatik- Getriebe Bereifung. 385/95R 24, Profil vorn 21 mm, hinten 18mm ID 7033 Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: good (used), Advantech AMiS-60 Professional Mobile Workstation for Medical Environments A high-quality, mobile medical cart by Advantech (Model AMiS-60). Designed as a "Workstation on Wheels" (WoW), this system is perfectly suited for hospitals, nursing homes, and medical practices, enabling the seamless integration of medication dispensing and patient documentation directly at the bedside. Highlights & Features: Ergonomic Design: Thanks to a manual gas-spring height adjustment mechanism, the cart can be effortlessly and continuously adjusted to suit any user's height with a single motion (accommodating both sitting and standing positions). Secure Medication Dispensing: Equipped with an MDS medication box featuring 16 individually removable compartments. The box includes an electronic control system (Open/Close) as well as a mechanical lock for emergency access. Integrated Power Supply: The chassis houses a high-performance LiFePO4 battery system, designed to provide long operating times and rapid recharging capabilities. Full-Featured IT Workstation: Includes a monitor mount (VESA-compatible), a retractable keyboard tray, and integrated mouse pads (usable on both sides). Hygienic & Mobile: Smooth, disinfectant-resistant surfaces and smooth-gliding medical-grade twin casters (lockable) ensure maximum mobility throughout hallways and patient rooms. Iedpfx Apoy Ny A Rjcjbb Technical Specifications: Manufacturer: Advantech Model: AMiS-60 Monitor: Includes Philips Medical Display (white) Connectivity: Integrated cable management system and equipotential bonding for medical safety compliance. Power Supply: 100-240V AC (standard wall outlet for charging). Accessories: Barcode scanner holder mounted on the monitor arm; emergency key for the medication box included. Scope of Delivery: Advantech AMiS-60 Base Cart Philips Monitor Medication Box (16 compartments) You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), I offer a Siemens SIMATIC Mobile Panel 177 PN, a mobile operator panel designed for professional applications in industrial automation. The device provides convenient operation and control of machines and production lines from a portable operator panel. Technical specifications: • Manufacturer: Siemens • Model: SIMATIC Mobile Panel 177 PN • Catalog number: 6AV6645-0BB01-0AX0 • Communication interface: PROFINET (PN) • Color TFT touchscreen • Programmable function keys F1–F14 • Built-in manipulator / control knob • Long connection cable with a multi-pin industrial connector • Made in Austria Condition: • Used item • Screen without cracks or mechanical damage • Normal signs of use and storage are visible • Housing in good technical condition • Sold as is, according to the condition shown in the pictures • Full testing is not possible – sold as untested Application: • CNC machining centers • Production lines • Industrial robots • Siemens SIMATIC automation systems • Assembly and production workstations Isdpozbufiefx Apcjbb Included: • Siemens SIMATIC Mobile Panel 177 PN • Original connection cable with an industrial connector

Year of construction: 2026, condition: new, Galvanized. 1. Rotary screen, 1600 mm, length 4880 mm, 4 mm woven wire (optional - 5.0 mm sheet metal at an extra charge), perforation 20 x 20 mm (or other upon request), drive 4 kW, drum speed approx. 14 rpm, 2. Receiving conveyor (under the drum). Length 3700 mm, width 800 mm, 3. Undersize material elevating conveyor. 4000 mm long, 650 mm wide, up to 2500 mm high, drive 3 kW, 4. Oversize material elevating conveyor. Length 4000 mm, width 650 mm, height 2500 mm, drive 3 kW, 5. Hopper with a length of 3000 mm, a width of 1800 mm with adjustable belt speed via a variator. Drive 3 kW, 6. Semi-mobile. Mounted on a chassis with wheels and a lower trailer hitch, 7. Cleaning brush with a diameter of 300 mm, length 4000 mm, 8. Drum drive via a gearmotor + 2 rubber drive wheels with a diameter of 230 mm, 9. Hour meter, 10. CE certificate, 12 months warranty, manufactured in EU (Poland), 11. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 12. Weight: approx. 3.5 tons, 13. Tramec durable gearmotor (with speed control in the hopper), 14. FAG and SKF rolling bearings, 15. Structures made of closed steel profiles - steel grade S355, 16. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 17. Drum construction is protected against corrosion - hot-dip galvanized (!), Iedsd Rzy Nopfx Apcebb 18. Drum structure - S355 steel. Wall thickness 3 mm, perforation to be agreed upon (optional), 19. Brush with adjustable spring. The brush pressure can be adjusted, 20. Electrical sockets and emergency stop switches, on both sides of the machine, 21. Drum covers. Powder-coated in the painting booth. The final technical specifications (length, width, perforation, additional components, etc.) are always agreed upon individually with the customer according to their needs. Sand. Black soil. Coal. Mixed waste. We prepare the machine according to your requirements. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length - on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English and Russian.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Iedpfx Aszhn Ngspcjbb Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options.

Condition: ready for operation (used), SALES OFFER FOR A COMPACT, ROBOTIZED SANDBLASTING BOOTH KUKA robot configuration: KUKA Robots KR 10 R1420 Configuration/Config.: Basic CYBERTECH NANO version: KR 10 R1420 CYBERTECH NANO A1-A3 cable set: Robot cable set A1-3 KR10 Ibodpfxszhrq Us Apcsb Mechanics color RAL: 260580 KUKA Orange Base color: According to layout/parts list Sign language: See layout/parts list CYBERTECH NANO warning signs: KR CYBERTECH NANO warning signs High-gloss finish: No high-gloss finish Trade fair finish: No trade fair quality Measurement type: Not position-accurate Material number: 10022523 CN/HS Code: 84795000 Robot is lightly used Sandblasting booth: 1800 x 1700 h 2300 The booth frame is made of thick-walled 80/80/3 steel profile. The walls are made of chipboard. The robot is mounted to the ceiling of the booth. A 200 mm diameter dust extraction pipe outlet is located on the outside of the booth. The robot is protected from dust by a cover made of special fabric. The abrasive material is in a closed circuit. The abrasive material is drawn from a hopper located in the lower part of the booth. The side wall has a door. The front wall has a rotating table – while the robot is sandblasting a particular item inside, the operator places the next item to be sandblasted outside the booth. There is no need to open the door to exchange the workpiece. Both the door and the rotating table are automatically locked when the robot is sandblasting. The control cabinet is located separately, away from the booth. The booth can be easily enlarged or adapted for spray painting. Working space: width 1400, height 1200, depth 400. Minimum price: 17,000 EUR net