Used Mixing Silo for sale (2,792)

Year of construction: 1994, condition: excellent (used), For sale are 2 units of coal dust silos. Capacity: 120 m³ per unit. Silo material: S235 Discharge cone material: Stainless steel, from Ø 250mm to Ø 1450 mm. Diameter: 3.40 meters. Silo height: 20.6 meters. Total height: 24 meters. Weight: 22 tons. Explosion vent: DN 1300. Implosion vents: 2x DN 500. Silo filter: Ø900mm Infra Jet AJP 304 (30m²). Filling line: DN100. Discharge cone: 70°. Air fluidization with 6 nozzles. Gbedpeh Dix Iofx Akyju Level measurement: Endress Hauser Soliphant. Discharge/dosing with dense-phase conveying. Manufacturer: Altmayer Airdos PDF 800. Rotary airlock: DN 250, manufacturer Kreisel. Dismantling has already been carried out; the silos are stored and immediately available.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 5,000 mm, Silo for sawdust. Gbedpjz Ranfefx Akyou

Condition: excellent (used), 447 USED Automatic bulk raw material dosing system Reimelt. EQUIPMENT: - 4 internal silos for flour, - 6 tanks, silos for mixes or flour. - 6 tanks for micro-raw materials, - mixers, - pumps, - raw material transport pipes, Godpfezxnttex Akyjbu - bowl dosing station (hopper), - flour catcher, - water mixer, - water cooler, - automation control, THE SET IS A COMPLETE INSTALLATION. Paid options available: transport of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Brand: Kemper Maximum flour capacity: 125 kg Maximum dough capacity: 200 kg Bowl volume: 306 L Number of speeds: 2 Number of timers: 1 Stainless steel bowl Stainless steel spiral Central kneading bar Bowl protection grid Electromechanical controls Analog timer Power supply: 380 V Increased motor power: 1.1 kW Frequency: 50 Hz Used Kemper SP125 spiral mixer – 125 kg of flour and 200 kg of dough General description The used Kemper SP125 spiral mixer is designed for bakery production that requires kneading large quantities of dough. Its capacity reaches 125 kg of flour, with a maximum load of 200 kg of dough, and a bowl of approximately 306 L. The identified unit has the designation "Type SPL" and "Größe 125" on its manufacturer's plate. It combines a stainless steel bowl and spiral with a two-speed operation. This configuration allows for distinguishing the initial mixing phase from the faster kneading phase, while maintaining a simple organization of the work cycle. Why this model stands out The Kemper SP125 primarily meets the needs of production where kneading capacity and cycle consistency are crucial. Its two speeds are complemented by two timers, allowing the working times to be organized according to the different phases of kneading. Gbedozzz Szepfx Akyeu The machine also has two motorizations, according to the available data for this unit. The protection grid placed above the bowl limits access to the kneading area during operation. Its design is based on electromechanical controls and a three-phase power supply adapted to a production environment equipped for this type of equipment. Key advantages Maximum capacity of 125 kg of flour, suitable for high-volume production Maximum load of 200 kg of dough Bowl volume of approximately 306 L Two kneading speeds to differentiate work phases Two timers to organize cycle duration Stainless steel bowl and spiral Protection grid for the kneading area Two-motor configuration on this unit

Condition: good (used), Mixing tank, mixing container, agitator tank, agitator container, silo system, transport silo, tank, fertilizer storage silo The tank comes from a paint manufacturer. -Condition: as shown in the pictures The tank can be cleaned for an extra charge. -Tank and agitator: made of stainless steel -Geared motor: 15 kW 311 rpm -Contents: 7.5 m³ -Outlet: bottom -on stand Godpfxocdgbco Akyjbu -Dimensions: 2050/2050/H5570 mm -Weight: 1715 kg

Condition: new, Year of construction: 2026, Fabo 30-ton horizontal semi-mobile silos are modern storage solutions designed to provide maximum efficiency and flexibility on construction sites. They enable the safe, organized, and practical storage of cement and similar bulk materials, especially in concrete plants and infrastructure projects. Gbedpjx Rqm Aofx Akyju Thanks to their horizontal and semi-mobile structure, these silos offer easy portability, reducing the need for fixed installations and saving significant time during installation and dismantling processes. Their robust steel construction guarantees long-lasting use and high durability in challenging field conditions. With a capacity of 30 tons, Fabo horizontal silos are ideal for medium and large-scale projects, working integrated with precise dosing systems to support production continuity. Their user-friendly design simplifies maintenance and cleaning, while their safety-focused details minimize operational risks. Manufactured with Fabo quality, 30-ton horizontal semi-mobile silos combine mobility, durability, and high performance, offering a reliable solution on construction sites. In horizontal cement silos, WAM or ÖZBEKOĞLU products are used for screw conveyors, silo top filters, air jets, vibromotors, pressure sensors, and level sensors.

Year of construction: 2025, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Silo V2 is most often located between the Rasper and the Granulator. It balances the output from the Rasper the input rate of the Granulator. It has a Silo with vibratory base to control the feed rate. Volume: 2 m3 Gbsdjzn Ul Ispfx Akysu See specifications in attached document

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer Gsdpfx Asz Hbt Hjkyobu • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, Mobile Concrete Batching Plant PROMAX M120-TWN (120m³/h) Plant Type : Mobile Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 120m³/ hour freshly compressed concrete Mixer Capacity: 4500/3000 lt (3m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY TRANSPORTATION * MINUMUM INVESTEMENT FOR FIELD GROUNDWORK * QUICK INSTALLATION OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Gbodpjflz Hqjfx Akyou *Aggregate Feeding system. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total height: 18,000 mm, outer diameter: 3,000 mm, water tank capacity: 70,000 l, Tank made of stainless steel with a capacity of 70,000 litres. Insulated body with load cells. Volume Total capacity 70,000 L Material Stainless steel Equipment configuration Insulated Load cells Transport information Length 18,000 mm Width 3,500 mm Gbsdpfx Ajxlir Dskyeu

Condition: used, Year of construction: 2023, Vertical mixing line consisting of: Hosokawa micron 20-MFC-43 conical mixing tank, year of manufacture 2023, capacity 2000 kg, total volume 3350 liters, empty weight approx. 1350 kg Donaldson Torit DCE dust filter, type DCE 125 F, year of manufacture 2023 Ruberg eddy current separator, type RWS 2-220, year of manufacture 2023 Goudsmit magnetics magnetic separator 2 screw conveyors 400 Volt Documentation available This lot extends from the 1st to the 2nd floor, up to the 1st ring above the Y-junction (rotary airlock not included) Dimensions of the upper part: approx. ø 220 cm Dimensions of the lower part: approx. 310x290x300 cm Mixing system with a round mixing tank, horizontal mixing unit, and multiple electric motors. Gbedsz Ipplepfx Akyeu Details: Configuration: round mixing tank on a frame with a horizontal mixing unit Drive: multiple electric motors Included: piping and fittings Material: metal, partially stainless steel Condition: used

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Gbedpfez Daukjx Akysu Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2013, functionality: fully functional, total height: 2,322 mm, total width: 1,154 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,315 kg, usable tank capacity: 320 l, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, Equipment: type plate available, Due to the closure of our facility, we are offering our fully functional, double mixing system for sale. This system was used until recently in active production. It was primarily used for the manufacture of high-quality epoxy resin systems. Scope of the offer (package sale): 1x Vacuum double planetary mixer (consisting of two identical planetary mixers) 4x Mixing vessels (compatible with the system) 1x Dispensing device Technical data: Manufacturer: Herbst Maschinenbau Model: HRV-S400DP Gedpfszv Rqpsx Akyebu Machine type: Vacuum double planetary mixer Last application: Production of epoxy resin systems Container volume: 320 l depending on the material / 400 l container total volume Drive power / connection values: see TDS in the appendix Condition & History: Used, fully functional, shows typical signs of wear and tear due to age and use. Processing, inspection & dismantling: Possible on short notice after prior arrangement. Availability: Immediately. Dismantling & removal: To be carried out independently by the buyer after prior consultation on site. Additional documents: Operating manual If you are interested or have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Godpfx Aoz H H R Rjkyobu

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Gbjdjz Azz Espfx Akyeu Output capacity 750kg p/h

Condition: used, Year of construction: 2014, operating hours: 11,448 h, Equipment: all wheel drive, Mercedes Unimog U400 with Breining U-Tank 2000 Bitumen Sprayer! ----* Manufacturer: Mercedes-Benz * Type: Unimog U400 * First registration: * Recorded mileage: approx. 242,950 km * Recorded operating hours: approx. 11,448 * Video available upon request * German vehicle * German registration * Superstructure: * Manufacturer: Breining * Type: U-Tank 2000 * Year of manufacture: 2002 * Sprayer bar width: approx. 2 meters * Bitumen tank: 1,600 liters * Water tank: 400 liters * With front sweeping brush * Price: 39,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Gbedsz N Nzfspfx Akyou All information is without guarantee, errors and prior sale excepted.

Condition: used, functionality: fully functional, empty load weight: 6,840 kg, maximum load weight: 27,160 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, loading space volume: 57 m³, total length: 12,460 mm, total width: 2,550 mm, total height: 3,996 mm, suspension: air, tire size: 385/65 R22.5, color: silver, trailer brake: trailer braked, Year of construction: 2007, Equipment: ABS, Tipping silo KIP 57.3 57,000 liters volume (used only for transporting foodstuffs) 6 manhole covers 24-volt tipping system Hydraulic rear supports SAF Intradisc axles with lift axle Gjdoz Abq Tspfx Akyjbu Used 385/65 R22.5 tires on aluminum rims 4 hose pipes Stainless steel toolbox

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper Gbjdpfx Aksz D U Daoyju • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. Gbsdezzvf Aopfx Akysu The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 900000545, Zeppelin CMB 300 High Intensive Mixing System 300L capacity 3 interchangable bowls on wheels Gbsdpfsz Hdikjx Akyeu

Condition: used, Mixing kettle that tilts for emptying Gbjdpjz Nc S Njfx Akysu This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Construction: Stainless steel

Year of construction: 2006, condition: used, Stainless steel mixing tank for dressings and sauces This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors. Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Mixing tank with agitator Speed: Stepless (frequency inverter) Tank: Hinged lid, conical bottom with outlet Gbjdpfxez Ndcie Akyeu Construction: Stainless steel, on legs with castors

Year of construction: 2022, condition: good (used), For sale, starting from our location in 55569 Monzingen, is a truck loading system consisting of two stainless steel external silos. The silos are used and in good condition. Gelatin powder was stored in the silos. Quantity: 2 Gross volume: 50 m³ Diameter: 3,500 mm Roof shape: Conical, 15° Cylinder height: 5,000 mm Bottom cone shape: Apex angle 60° Outlet diameter: 200 mm Equipment: Lifting eyes Hinged manhole, 600 mm diameter, with protective grille Support for over/under pressure protection Support, DN80 PN10, for filling line Support with blind flange Support for overflow Support for level switch We will be happy to provide further information about the system/silos upon request if you are interested in purchasing it. Gedpfxjz I S Nns Akyjbu The system is currently still in operation and can be inspected after prior arrangement. Dismantling, loading and transport are the responsibility of the buyer.

Condition: used, Year of construction: 1999, operating hours: 13,300 h, * Bitelli SF 200 asphalt milling machine * Year of manufacture: 1999 * Operating hours: 13,000 h * MB engine * Milling width: 2 m * Hydraulic folding conveyor belt Gbjdozm Epbspfx Akysu * Weight: 29,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Gbsdpfx Ajzl Td Rokyou The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.