Used Mineral Water for sale (7,689)

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. Bodpfx Acjrivv Esyoww The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, functionality: fully functional, Specific information see in passport included. Price on request. The demineralization plant was used to treat raw water in basically four technological steps: - Water pretreatment - preheating, clarification and filtration, - Water demineralisation is a chemical treatment in which all minerals, i.e. dissolved salts, are removed from raw (river) water. The resulting treated water is then virtually Bwedpowwtp Tofx Acysw chemically pure H2O, containing only dissolved gases - oxygen, nitrogen and noble gases (carbon dioxide is removed), - Water softening stations for water treatment hot water circuits - Thermal degassing of water The demi-station technology also includes auxiliary equipment for chemical storage (storage tanks, bottling equipment ...), waste water removal (sumps, tanks ...), media transport (pumps, pipelines, storage and dilution tanks ...).

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21FW100020, The FluidWorker® 100 uses UV-C technology to reduce bacteria in machine tool cooling lubricants in an environmentally friendly and efficient way. It is also successfully used for chemical-free control of bacteria in process water systems, e.g. parts washing systems, cleaning baths, hardening coolants, etc. By using a FluidWorker 100 on the machine tank, biocides that are harmful to the environment and health can be significantly reduced. Biocides are the main cause of allergies, respiratory diseases and skin irritation among machine tool workers. The use of a FluidWorker 100 also generally increases the service life of cooling lubricants by at least 30%, thus saving costs for the replacement and disposal of coolants. The FluidWorker® 100 works in the bypass on the machine tank. The necessary installation accessories are included in the package. Bodjqvzx Nopfx Acyoww

Condition: ready for operation (used), machine/vehicle number: CRS00003950, Condition Used Stock Number 50208.1515 This listing is for the Veolia/Elga PC1ANRXM2 Purelab Choruss The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Bwsdpfx Acjwf Tbleysw Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed Bwodpfx Aenab Rzecyew - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Overhauled rotor for SBM 10/6/4 S, SM, ES etc. SF blow bar Bsdpfxeu Iuyys Acysww Rotor has been rewelded, blow bar seats reworked, bearings renewed, bearing housing checked Bearing distance center center 1120mm Bore pattern bearing foot 400 x 160 mm Mounting possible

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) Bwjdpsnab Rlofx Acyjw - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements Bodpfx Acenab Sioyjww - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: excellent (used), first registration: 07/2014, loading space volume: 29 m³, Year of construction: 2014, = Further Information = Unladen weight: 7,060 kg Payload: 30,940 kg gross vehicle weight: 38,000 kg Number of compartments: 1 Water installation: Yes Technical condition: very good Visual condition: very good Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: Bjdpfxjwxx N Ue Acysww MOB: Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: Dutch) Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details listed on our website. If you have received any different information, please contact us. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, Item: D-3309-Grundfos pump Grundfos Centrifugal Pump – Type CP3-60 Used high-quality Grundfos centrifugal pump, made in Denmark. Compact, reliable unit suitable for industrial, food industry, and CIP applications. Technical details: Manufacturer: Grundfos (Denmark) Type: CP3-60 Model: B91-25756 Speed: 2900 rpm (50 Hz) Capacity: approx. 3 m³/h Head: approx. 52 m Power: approx. 1.2–1.4 kW Material: Stainless steel (depending on configuration) Condition: Used, in good working order Applications: Ideal for CIP return, clean water, cooling circuits, filtration systems, or other industrial processes that require stable pressure and moderate flow rates. Location: Denmark Bwsdpfx Acsxt Itvoysw Price: On request

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. Bjdpextqxbjfx Acysww The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Year of construction: 2011, operating hours: 2,369 h, condition: excellent (used), functionality: fully functional, operating pressure: 2,400 bar, pump pressure: 2,400 bar, water pressure: 2,400 bar, machine/vehicle number: G55600085, Fully refurbished machine in 2020, only 257hours since, bought for project and never used after. Unit is in like new condition. Bwedpfjv S Duwsx Acyow

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 3,000 mm, total width: 2,400 mm, total length: 6,000 mm, energy consumption: 35 kWh, Equipment: documentation/manual, Vacuum Evaporator – 57,000 L/Day | Industrial Wastewater and Process Water Treatment General Description Bedpfx Ajwnbxdocyjww The vacuum evaporator offered here (57,000 L/day) originates from a project for the treatment of process water and fermentation residues in a biogas producer consortium in southern France. The plant was fully installed but never commissioned and is in as-new, factory-preserved condition. It is immediately available. The evaporator is designed as a thermally efficient vacuum system and serves for the volume reduction, concentration, and recovery of water-containing liquid wastes. In combination with downstream reverse osmosis, it is ideal for applications requiring both clean distillate and highly concentrated nutrient or brine solutions. Technical Data (Evaporator 57,000) Type: Vacuum evaporator, thermally heated Manufacturer: Blue Water Plant Year of manufacture: 2020 Capacity: 57,000 L/day (approx. 2,400 L/h) Operating pressure: < 0.2 bar (vacuum mode) Heating medium: Hot water / steam Material: Stainless steel AISI 316 / 304 Control system: Siemens S7-1200 PLC with touch panel Energy consumption: approx. 45–55 kWh/m³ (depending on feed water) Condition: As new, factory preserved, unused Fields of Application • Biogas and digestate treatment – recovery of nitrogen concentrates • Landfill leachate treatment – reduction of wastewater volume • Chemical & pharmaceutical industry – process water treatment • Food industry – cleaning and reuse of rinse and process water • ZLD systems (Zero Liquid Discharge) – final stage concentrate evaporation Advantages • High thermal efficiency through vacuum operation • Robust stainless steel construction (AISI 316) for aggressive media • Fully automatic control (Siemens S7 + touch HMI) • Low maintenance, long-life components • Ideally compatible with RO systems (double pass integration) • Immediately available – optional refurbishment, acceptance testing & 1-year warranty Special Features • System was part of an integrated plant with SIMPEC RO 8000 44 8 • Never in operation, fully documented and preserved • Location: Southern France (dismantling & transport by RIEFILT GmbH can be arranged) Price & Scope of Delivery Price: On request Scope of supply: Evaporator 57,000 + control system + documentation Optional: Refurbishment / Factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Condition: good (used), Year of construction: 2018, operating hours: 1,200 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 6,000 mm, operating pressure: 4,500 bar, Sunrise Waterjet Cutting SQ6020 Bwjdpowyi Uwjfx Acyjw Fully custom-built model to specification. High-pressure intensifier pump CUX-400H, rated pressure 4,500 bar. Cutting table 6,000 x 2,000 mm over 3 axes. Pneumatic sludge extractor. Abrasive silo. The machine is from December 2018 and was commissioned in February 2019. It is in perfect working condition. This machine cuts absolutely all materials (except tempered glass). Steel cutting capacity over 100 mm thickness. (Cuts stainless steel, aluminum, copper, bronze, stone, tiles, glass, composites, etc.) To fully refurbish, the following is required: cleaning of the cutting tank (approx. €2,800), replacement of the vanes (requires 2 sheets of 3mm 304 stainless steel), and maintenance of the HP pump (approx. €1,500). Dismantling and transport are at the buyer’s expense. Sale due to health issues.

Condition: excellent (used), Year of construction: 2017, operating hours: 966 h, functionality: fully functional, machine/vehicle number: G57200327, pressure: 500 bar, operating pressure: 500 bar, fuel: diesel, temperature: 100 °C, pump capacity: 30 l/min, Falch TrailJet 30 500-30-100-d – Hot Water High-Pressure Trailer Year of manufacture: 2017 | Operating hours: 966 h | Condition: well maintained & ready for operation For sale is a high-performance Falch TrailJet high-pressure trailer with hot water function – ideal for professional industrial cleaning and restoration tasks. Suitable for cleaning surfaces, pipes, industrial facilities, and more. Technical Data Model: Falch TrailJet 30 500-30-100-d Working pressure: up to 500 bar Water flow rate: 30 l/min Temperature: up to 100 °C (hot water) Engine: Diesel engine Bodjxt Rhijpfx Acyeww Registration documents: all present and complete Features Trailer box (closed system, mobile & road-approved) Radio remote control Easydriver Active 2.8 manoeuvring aid (Reich, year of manufacture 2021) Full service will be carried out before delivery Condition Machine has been serviced regularly Fully functional, immediately ready for use Normal, age-appropriate signs of use Viewing and test run possible by appointment. Sale is to commercial buyers only (B2B).

Condition: like new (used), Year of construction: 2023, operating hours: 15 h, functionality: fully functional, machine/vehicle number: VP-06/20-204, overall weight: 50 kg, fuel type: diesel, Diesel transfer pump. 150 mm pipe diameter. 180 m³/h capacity. As new condition. Fully functional. 150 mm delivery hoses included. Bsdpfxext Dv Hs Acyeww

Condition: used, For sale, KSB KRTK pump Parameters: - Capacity: - 450.000L/h - Engine power: 9 kW - Rotation speed: 955 rpm. Bsdev Dx Agepfx Acyoww -///// PRICE IS FOR 1 PCS./////

Condition: used, Multicar M25 Bodpfxjv Dwraj Acyeww Year of manufacture: 1986 -with water tank (water truck body) -with spreader body

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Bwodpoxtc Rcofx Acyew Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Condition: new, Year of construction: 2025, functionality: fully functional, Automatic water groove milling machine with 4 motors Bjdpfexta Ixox Acyjww

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: FA19-63709.1, pressure (max.): 5 bar, CSN instantaneous water heater type 97/DF-100 with 2-stage contactor control Instant water heater: Voltage: 400V 3 Power: 100kW Protection class: 54 Levels: 2x25/ 1x50 kW min/ max. temp.: 0/ +90°C Filling volume: 54 liters Control: Type: 200S01004002451903 Bodjvtrltopfx Acyoww S/N: FA19-62758.1 Voltage: 400V 3/PE AC 50 Hz Power: 100kW Protection class: IP 43 The instantaneous water heater type 97/DF-100 with STS 2 is a reliable solution for the efficient heating of liquids in industrial processes. With its robust design and precise temperature control, it is ideal for applications where constant and uniform heating is required.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10404807, Professional recirculating chiller, purchased (used) via Amikon GmbH in January 2024. Always serviced and inspected by Julabo themselves. In 2025, among other things, the pump and power board were replaced. Invoices and reports are available and will be supplied. Specifications: - Type: FLW4006 (water-cooled) - Power supply: 400V, 50Hz, 3P+N+PE, 16A - Refrigerant: R452A, 700g - Capacity: approx. 4 kW - Temperature range: –15 °C to +40 °C - Temperature stability: ±0.5 °C - Serial number: 10404807 Condition: - In very good technical condition - Immediately ready for use - Including documentation and maintenance invoices Bjdsw U Exgjpfx Acyjww

Condition: like new (used), Year of construction: 2021, operating hours: 800 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.102 mm, 5-axis waterjet cutting system Bjdpfjxr A Tnox Acyjww PAC 60 5-axis cutting head (60° swivel) Pump Quantum NXT ESP 66 Series G4 4550 bar Chiller for NXT 55/66-G4 Pump diagnostic software Abrasive pump and container for blasting material (500 kg) Workpiece thickness measurement

Condition: excellent (used), Offered here is a water cooler generator from the company Lennox. LENNOX chiller 400 V without condenser for indoor installation two cooling circuits capacity: 153 kW R 407 C low mileage dimensions H x X W x D: 1750 x 1500 x 650 mm Bodpfeg Uv Ayex Acyoww For technical data please refer to the nameplate.

You will receive a proper invoice with VAT. The price is incl. VAT.
We have more various interesting things for sale. Please have a look at all our ads.
If you are interested or have any questions, please contact us via the message function!

Condition: used, Technical details: voltage: 360-730 / 50 V / Hz weight of the machine ca.: 0,150 t Bjdpfsu N Afysx Acyeww *