Used Mikron Vce 800 for sale (178)

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Nodpfsw A Af Isx Ahvjcp Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Nodpeykb Hljfx Ahvjcp Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: excellent (used), Year of construction: 1984, operating hours: 3,665 h, functionality: limited functionality, Equipment: rotational speed infinitely variable, For sale is high precision micro gear hobbing machine Mikron 102.05, made in Switzerland, year of manufacture around 1984, slightly used, run 3665 moto hours on counter. Have many accessories. Price is 12500 Euro EXW. Ncodpfx Ahjymfnlsvop

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Nsdpsg Nw Rzjfx Ahvjcp

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,564 h, functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Number of Axes: 4 Distance between vertical spindle and table: 115 mm Max. spindle speed: 24,000 rpm Feed rate: 1,500 mm/min Rapid traverse: 22 m/min Table length: 1,150 mm Table width: 700 mm Turret stations: 60 Tool changer type: TC 30 Number of tools: 30 Nsdjyhnxcopfx Ahvocp Tool diameter: 77 mm Diameter with adjacent empty stations: 115 mm Max. tool length: 305 mm Tool holder: HSK A63 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Connection: 50 Hz 3x 400 V Total power requirement: 40 kW Dimensions & Weight Dimensions (L x W x H): 5,220 x 3,100 x 2,840 mm Machine weight: approx. 10,500 kg Operating Hours Power-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Rotary table, 4th axis Set of tool holders, 45 pieces Tool cabinet LISTA

Condition: good (used), Year of construction: 2003, functionality: fully functional, coolant tank capacity: 2,000 l, Used, well-maintained transfer machine / rotary indexing table machine / dial-type machine MIKRON MULTISTAR CX 24 Ncedpfxeyk Hras Ahvjp Availability: immediately The following modifications have been carried out on the system: Machine: - All motor cables replaced. - All sensor cables replaced. - PLC program adapted to enable and disable collets. - Converted to Knoll coolant system. - Wiring diagram manually modified. - Frequency inverter replaced. - Part selector installed on the machine, including oil pump for oil return. Saw: - Saw control converted to Mitsubishi i-QR control system. - Complete electronics of the saw renewed. - Saw fully mechanically overhauled. Accessories: - 1 x loading station (brass D = 3.9 mm) - 1 x unloading station - 1 x part selector (8-position, see picture) - 1 x lateral drilling unit - 1 x rotary straightening device (fully newly mounted October 2023) - 1 x feed / saw unit (control and inverter overhauled in 2021) - 1 x pneumatic loader (via feed tube) - 1 x chip conveyor with dirty water pump (without chip trolley) - 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump, and vacuum pump, including low-pressure pump (5 bar) and high-pressure pump (60 bar) The machine has been operated with cutting oil. If you have any questions or require further information, feel free to send us a message or call us.

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Nodeilp Euepfx Ahvocp Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Njdpewit Rhjfx Ahvecp Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Ncedpfowiucfex Ahvjp Net weight of the machine: approx. 2570 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Njdpfsw Sxyxjx Ahvecp

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Nsdpfx Ahotuwk Usvscp

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Ncodpsxcxz Nofx Ahvep

Condition: ready for operation (used), Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible. Ncjdex Tul Iopfx Ahvjp

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Ncedew Emx Rspfx Ahvop

Condition: used, functionality: fully functional, machine/vehicle number: WF 74 C TNC, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, total height: 2,420 mm, total width: 3,573 mm, total length: 3,925 mm, table width: 600 mm, table length: 1,200 mm, input voltage: 400 V, Equipment: documentation/manual, Langsverplaatsing X -as 900 mm Dwarsverplaatsing Y - as 630 mm Hoogte verplaatsing Z - as 500 mm Afmetingen opspanvlak- tafel (LxB) 1200 x 600 mm Freeskop-opname spil (ISO) ISO 40 Ncjdpsyh Ahpjfx Ahvsp Boordiepte 100 mm Max aantal snelheden 20 > 6300 rpm Sturing Heidenhain

Condition: good (used), MAchine come with toolholders. Nodpfxovk Ng Ae Ahvscp

Condition: good (used), Year of construction: 2006, Technical details: X 1000 mm Nedpfx Ahoych D Uevscp Y 1150 mm Z 895 mm 15.000 rpm, HSK 63, 92 places in tool changer, Touch probe will come, laser measuring system. Coolant thru spindle. Parts shown by hand not come. Parts shown by hand not come.

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 Nodpfokvrptsx Ahvjcp -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: used, Year of construction: 2000, x-travel 1000 mm Ncedpfxetig D Ie Ahvep y-travel 1040 mm z-travel 750 mm control Heidenhain TNC 426 turning speeds 15000 U/min total power requirement 40 kW weight of the machine ca. 10,1 t required space / m

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France) Nedpfx Ajt Hr Ahshvjcp

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t Nsdpspxrknefx Ahvjcp

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min Ncsdpox H Ntajfx Ahvsp B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate Nodpfokzpm Hox Ahvocp -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: excellent (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board Ncedpfok Aua Njx Ahvop -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging -Type: WW TCD 22 . 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm -Weight: 0.6 kg

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate Nedpfsrcnm Njx Ahvocp -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg