Used Mig Welder for sale (849)

Condition: excellent (used), Stud welder Make TRW. Nelson Type Alpha 850 YEAR OF MANUFACTURE 1995 maximum welding capacity studs up to 12 mm welding current continuously adjustable from 100 - 850 A supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm height 380 mm Ijdpfsvcl T Aex Adnja

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch Iodpfxjrtvi Rj Adnsa - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, OTC CPTX-i 400 2w 30-400 AMP Synergic Water-cooled Fixed Programs Steel - Stainless steel Weldable Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Iedpfx Adoxcam Tjnsa The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 Iodpfx Asxgg T Ujdnoa • Weld controllers • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system.

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: Isdpfju Aw Shjx Adnja - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm

Condition: excellent (used), Mini FlowPack SVD – a unique device on the market for packaging both individual items and bulk components such as screws, parts, etc. The machine is equipped with a special loading funnel and a film roll holder. It forms a bag from the film, seals the side and top, enclosing the product inside, while simultaneously preparing the next package. Make-Fill-and-Seal Bagging Machine This is a manual, vertical flow-pack type packaging machine, designed for producing, filling, and sealing bags in a three-step process. It is ideal for packaging seeds, granules, screws, machine parts, and other solid loose goods (not suitable for powders like flour). The machine uses polyethylene film with a recommended thickness of 40–60 µm. The resulting bag has a width of approximately 160 mm and a length of 50–180 mm. Operation steps: The bag is formed from a roll of film placed on the machine The bag is filled through a dosing chute Sealing and cutting of the filled bag occur in a single step ✅ End-of-sealing audible signal ✅ Lightly used Model: SVD-160/190 – Technical Specifications Power supply (V/Hz): 230 / 50 Installed power: 0.18 kW Bag width: ~160 mm Bag length: 50–180 mm Isdoxfvk Tspfx Adnsa Seal width: 4 mm Sealing time: 0.1 – 1.6 s Max film thickness: 0.06 mm Film roll width: 400 mm only Net weight: 30 kg Machine dimensions (L x W x H): 500 x 500 x 650 mm

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- Isdpfx Aowf Rg Sednja orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: like new (used), Year of construction: 2024, REHM P 300 W 0.8/1.0 with Profi trolley Condition: Demonstration machine Iedpfx Adexamgbsnja Scope of delivery: - Abicor Binzel 401, 4m - Ground cable 5m - Pressure regulator - Basket spool adapter

Year of construction: 2003, condition: used, machine/vehicle number: 06H 127; Lg-Nr. 06565, Technical data: Isdpfscinmbox Adnoa - water-cooled DC-AC equipment TIG TR 4, - water-cooled MIG-MAG equipment DV - IV - XT - E. Welding machine STH 400 - for welding of: Stainless steel , steel , aluminium , etc. - 16-fold welding program preselectable with: - - Preset: E-welding , TIG - welding AC / DC, MIG-MAG welding - Digital Volt + Ampere display - Welding current infinitely variable from 10 A / 15 V to 400 A / 34 A - max. welding current max. 400 A 60% ED - 315 A 100% ED - Power consumption 400 V / 43 A / 16 kVA - pulse device - Welding current increase and decrease adjustment - Backfire adjustment - Gas pre - post current adjustment - water-cooled WIG - hose package 8 running meters, light version - E.- welding cable + earth cable - water cooled MIG - MAG hose package - Separate wire feeder case DV - IV - XT for MIG - MAG welding - 4 rolls - wire feeder - Intermediate welding set - wire feed case 4500 mm - pressure reducer - E. - welding cable + earth cable - Space requirement approx. W 550 x H 1650 x D 1100 mm - Weight approx. 350 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision Ijdoxgg Rtspfx Adnoa RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine H17, Spool pay-off system, cross wire DV6, Prefeeding system DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Condition: new, welding current max. 300 A Iedjvn U Erjpfx Adnja open-circuit voltage 55 - 76 V connected load frequency 400 V weight 150 kg Dimensions (LxWxH) 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m

Condition: new, Year of construction: 2025, The seam welding machine allows you to weld straight sheets and round sheet metal parts in high quality without burning them out. This process is made possible by welding with copper wire. Thanks to the touch-sensitive PLC control panel, all operator errors are eliminated. Technical Specifications: Iodpfohcr H Sjx Adnea Power supply: 45kw / 380V Range of processed sheets: 0.5 / 1.0mm Mat diameter range: 100-1250mm Working length: 1250mm Working speed: 2-8m / min Air consumption: 1.5lt / min Cooling: mini chiller as an option

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A Isdpfx Ajwf Rgrjdnoa --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Iedpfxewx Hz Ee Adnea Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 011140, Offer 19217 Technical specifications: - Compact system with stroke and short-cycle drawn arc welding - For welding studs, pins with air gaps, and contact welding - Made of V 2a steel - Stud diameter approx. 3 - 8 mm - Welding output, e.g., with an 8 mm stud diameter, approx. 3 pcs/min - Welding output, e.g., with a 3 mm stud diameter, approx. 10 pcs/min - Welding current A - PMK 10 positioning welding gun with 6 m connection cable - 2 x ground cables Iodpfx Aowbrwwjdnsa - Power plug 220 V / 16 A - Space requirement approx. W 450 x H 300 x D 550 mm - Weight approx. 25 kg

Condition: new, Year of construction: 2024, Year of production: 2024 Model: R1550 Iedovbbn Hspfx Adnea Serial number: V00324 Max demand: 12KW Rated voltage: 220V/50HZ/1 PHASES Max current: 32A

Condition: new, current intensivity 200 A capacity at 100% load 150 A 230 V weight of the machine ca. 9,0 t dimensions of the machine ca. 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package - Additional 8m hose package Ijdpfx Aewrzrxsdnea - Ground cable - Gas connection hose - Documentation

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Column-type spot welder PEI MOD. PBP 126 PX Iedpjw T Tlfsfx Adnja Year of manufacture: 2006 CE PEI POINT pneumatic spot welders are user-friendly and ideal for welding all types of metals. This machine is foot pedal operated with pneumatic drive and offers a maximum welding power of 25 kVA. The machine is also equipped with water-cooled electrode holder, electrodes, arms, and transformer. The upper arm is depth-adjustable and the lower arm is height-adjustable. Used • Pneumatic foot pedal operation • Maximum welding power: 25 kVA • Maximum capacity: 2.0 mm • Electrode force: 165 dan • Throat/Arms: 580 mm • Depth-adjustable upper arm • Height-adjustable lower arm • Steel frame • 400 V, 50 Hz

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative Ijdpfswf Rg Esx Adnea arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, Year of construction: 2025, Technical Specifications Type: Capacitive Discharge Model: KMP400 CD Mini Spot Welder Operated: Pneumatic Pressure: 4 bar Power: 400WS Welding Capacity: 0.5+0.5mm copper sheet Maximum Force: 25daN Input Voltage: 220V/50Hz Protection Fuse: 30A Power Level: %1-100 power adjustable by digital microcontroller Weld Time: 5ms Arm Length: 250mm Power Input Cable: 3m Iodpfx Aewl Rq Rjdnoa Dimensions (W/L/H): 320mm x 455mm x 280mm (Power Supply) Dimensions (W/L/H): 200mm x 350mm x 485mm (Welding Head) Total Weight: 26Kg

Year of construction: 2000, condition: good (used), machine/vehicle number: 84061, Offer 22629 - air-cooled direct - alternating current - unit, mobile - for welding of all weldable metals - e.g. stainless steel, steel, aluminum, brass, etc. - Welding current TIG infinitely variable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current display - Frequency control of the arc - HF - ignition - pulse device - hose package 5 m - pressure reducer Iedpfx Adjixp D Ujnja - ground cable - trolley - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg

Condition: new, AB-1510DEX Range 1500mm Lifting capacity: 6KG Supply voltage: 220v ±10%,1 phase, 50 Hz Source: AOTAI MAG-350RL (350A , Supply voltage: 380v ±10%, 3 phase, 50 Hz) Ijdpfx Adou Tgwfjnea After-sales and warranty service begins with the delivery of machine to the Buyer (consumable parts are not included in the warranty). Warranty period: (a) robot with controller - 12 months, b) welding source - 12 months, c) remote control (without screen) - 3 months.

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Ijdpfx Ajxdda Hednea

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm Ijdswf Rgxjpfx Adnoa The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Year of construction: 2009, condition: good (used), machine/vehicle number: 4495678, Offer 18336 Portable TIG-DC welder on transport cart Technical data: - TIG - DC + electrode welding - Welding current infinitely variable for TIG welding from - 5 A-10.0 V to 150 A - 22 V 35% ED - 100 A 100% ED - connection 220 V / 50 Hz 15 A - with: - 2 cycle 4 cycle - function - HF- ignition - Welding current descent adjustment - gas pre-flow regulation - gas post-flow regulation - hose package 4,5 lfm, light version - ground cable - pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - weight approx. 10 kg Ijdpfx Ajhq T N Dodnja - Transport trolley with gas bottle storage space W 550 x H 900 x D 560 mm - Weight of transport trolley approx. 10 kg