Used Mesh Baskets for sale (1,598)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13/15, Equipment: documentation/manual, DRYER FOR FRESH PASTA, FRUIT, NUTS ESC100 Dryer that allows the wrapping, pre-dressing and drying of short, long and stuffed pasta, as well as the drying of pasteurized pastes before a possible packaging. Capacity for drying cycle: 100 kg approx Panels injected with hot injected polyurethane foam, with high thermal stability, in white pre-painted sheet Electric heaters for air heating (1,2 Kw x 3 = 3,6 Kw) 500 mm axial fan for forced air circulation (1 Kw approx.) Electrical panel with PLC board for setting and checking drying phases N ° 2 Butterfly valves controlled by Belimo electric actuator Rjdpfx Ajtrd N Esmyjcd Probe for internal humidity control Instrumentation for checking drying and temperature times controlled by an EC-compliant electrical panel with programmable digital electronic card N ° 25 frames in fir wood 600 x 1200 mm, with polyester mesh and aluminum sealing bars N ° 1 Stainless steel trolley on wheels Technical data Voltage: 400 V – Three-phase Total power: about 5 Kw Dimensions Depth: 1000 mm (+ 300 mm above the door) Width: 1670 mm Height: 2260 mm (+ 400 mm humidity extractors)

Condition: used, functionality: fully functional, Horizontal beams TBS: - Type 80x50mm, 2700mm -> 162 pcs - Type 100x50mm, 2700mm -> 180 pcs - Type 120x50mm, 270mm -> 80 pcs Frame uprights: - Type 80x70mm, 3000mm -> 0 pcs - Type 80x70mm, 6500mm -> 4 pcs Rodpfxozqt Nds Amyocd - Type 80x70mm, 8000mm -> 2 pcs - Type 100x70mm, 7000mm -> 14 pcs Pole frame protection: - Type 400-s, 80mm -> 4 pcs - Type 400-s, 100mm -> 6 pcs Pallet bumper: - Type 100x50mm, 2700mm -> 38 pcs Mesh infill: - Type 1120x860mm -> 500 pcs Diagonal beams: - Type diagonal, 40mm -> 50 pcs - Type diagonal, 70mm -> 70 pcs - Type horizontal, 40mm -> 8 pcs - Type horizontal, 70mm -> 15 pcs

Condition: used, functionality: fully functional, Year of construction: 2006, Articulating Telescopic Work Platform Genie Z45/25J * Working height: 15.8 m * Platform height: 13.8 m * Lateral outreach: 7.6 m *integrated charger * Overall dimensions (L x W x H): 6,600 x 1,800 x 1,900 mm * Weight: 7,402 kg * Basket load capacity: 227 kg * Rotating basket, hydraulic jib 1,400 Rodpfx Amsyqqabeyscd * Basket dimensions (L x W x H): 1,750 x 700 x 1,100 mm * Basket and ground controls

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. Rcsdpfov E Ec Njx Amysd T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning).

Condition: used, mileage: 147,773 km, power: 130 kW (176.75 HP), first registration: 09/2018, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 270 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Special Equipment: * Storage Package 2 * Composition Audio system (radio, SD card interface, MP3 playback function) * Exterior mirrors electrically adjustable and heated * On-board tools and jack * Chassis: reinforced shocks and stabilizers, front and rear * Metallic paint finish * Front ladder rack with protective bulkhead mesh * Spare wheel with road-going tire * Rear wall with window * Rear mud flaps * Seat covers/upholstery: artificial leather * Cab seats: double passenger seat with storage compartment and folding backrest as table * Cab seats: comfort driver's seat * Auxiliary water heater with stationary heating function and remote control Additional Equipment: * Driver's airbag * Exterior mirror convex, left * Exterior mirror convex, right * LED indicator lights integrated into exterior mirrors * Rubber flooring in cab * Dual headlights * Dual-tone horn * Driver assistance system: hill-start assist * Driver assistance system: brake assist (HBA) * Electric front windows * Laminated windshield * Grab handles A-pillars * Interior lights in cab: LED * Body: Double cab dropside, standard * Fuel tank: 75 liters * Radiator grille with upper chrome trim * Steering column (steering wheel) adjustable * Headlight range adjustment * Truck approval * Side marker lights * Engine 2.0 L, 130 kW TDI * Multi-function display Plus * Rear fog light * Wheelbase 3640 mm * Low emission according to Euro 6 * SCR system (AdBlue technology) * Electro-mechanical power steering * Seats in load/passenger compartment: first row * 4-seater bench (double cab) * Steel rims 6.5x16 Rcsdpfozqi Enox Amyed * Engine start/stop system * Front bumper in grey with vehicle color trim * Seat belt warning system (driver’s side) * Heat-insulating glazing * Central locking with remote control and interior operation * Perm. gross weight 3.50 t All information without guarantee.

Condition: new, functionality: fully functional, machine/vehicle number: A3E6MA2097Z, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 3,500 mm, mast type: duplex, construction height: 2,230 mm, fork length: 1,150 mm, empty load weight: 590 kg, total length: 1,730 mm, drive type: Lithium-Ionen, construction width: 820 mm, High-lift pallet truck Chassis number: A3E6MA2097Z Load center: 600 Fork width: 160 mm Fork thickness: 70 mm Mast type: Duplex Condition: New unit Technical condition: New Front tire type: Polyurethane Front tire size: 210 x 70 Front tire condition: New Rcsdszqifuopfx Amyod Rear tire type: Polyurethane Rear tire size: 80 x 70 Rear tire condition: New Battery voltage: 24V Battery capacity: 60Ah Battery manufacturer: Hyster Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: Start via key switch, standard version, mast protection made of wire mesh/Lexan, ergonomic multi-function tiller with extensive display, fast-charging lithium-ion battery.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. Rcedpfozhi Uqex Amysd With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. Redpjzg Tanofx Amyjcd FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: excellent (used), Year of construction: 2023, 462 USED Hobart bakery basket washer, dishwasher with water softener. TECHNICAL DATA: - year of production: 2023 - equipped with a water softener EXTERNAL DIMENSIONS (in cm): - width 138 - length 95 (135 with door open) - height 202 (244 with door open) INTERNAL DIMENSIONS (in cm): - width 122 - length 68 - height 84 (for spray arms) Paid options available: transport of the device. Rcodpfx Ajznxduemyod The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet Rsdpswllmajfx Amyjcd 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: new, maximum load weight: 22,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,535 mm, loading space width: 2,472 mm, loading space height: 2,970 mm, loading space volume: 99 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Talson TGG TAL 12/18 Mega Box Trailer – RAL 9005 Jet Black For sale are two brand new Talson TGG TAL 12/18 Clothing Mega Box Trailers, year of manufacture 2025. These vehicles impress with their robust construction, high-quality materials, and large cargo capacity – ideal for textile or volume transport. 2x Immediately Available General Information Manufacturer: Talson Type: TGG TAL 12/18 Year: 2025 Country of Registration: Germany Color: RAL 9005 Jet Black Quantity: 2 units available Dimensions Overall height: 4,030 mm Internal height: 2,970 mm External length: 13,710 mm Internal length: 13,535 mm Overall width: 2,550 mm Internal width: 2,472 mm Volume: approx. 99 m³ Pallet capacity: 33 Euro pallets Weights Gross vehicle weight: 30,000 kg Axle load: 18,000 kg King pin load: 12,000 kg Unladen weight: approx. 7,200 kg (±3%) Chassis / Axles 2 BPW axles with disc brakes WABCO EBS 2S/2M incl. ABS & RSS (UN ECE R13) Mechanical suspension with “Reset to Ride” function Tyres: 445/45 R19.5 M+S (premium tyres) Steel wheels with offset 1x spare wheel carrier (basket type) Body / Interior Equipment Self-supporting aluminium sandwich construction, non-insulated Side walls with Talfix® system for flexible load securing 27 mm waterproof plywood floor (forklift suitable up to 5,400 kg to EN 283) 13×2 lashing rings (in accordance with EN 12640) Rsdpfx Aoxpp Nwomyjcd Roof with glass-fibre reinforced profiles and 4 LED interior lights Double-wing rear door with double tube lock Front wall: aluminium, interior 18 mm laminated plywood Load securing to EN 12642 Code XL (VDI 2700) Equipment / Details LED exterior lighting (Aspöck Europoint 3) Sockets: 2×7-pin + 1×15-pin (ECE R48 / ADR) Ramp holder right-hand side, 4470×1200 mm Aluminium rear underrun protection to UN ECE R58.3 Side underrun protection to UN ECE R73 Antispray mudguards according to EU 109/2011 Plastic toolbox (400×480×600 mm) Rear access ladder Chassis hot-dip galvanized and corrosion-protected For more information, please do not hesitate to contact us.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Rodewmh Hrspfx Amyscd Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Redpfxjy D E Tdj Amyjcd

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 02/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Rcjdpfxezntpfo Amyed Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 11 mm Front right - 11 mm Middle left - 13 mm Middle right - 13 mm Rear left - 10 mm Rear right - 10 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 06/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Redpszntnzofx Amyocd TrailerConnect S.KO COOL country package wave 3 Tyres Information Front left - 15 mm Front right - 14 mm Middle left - 7 mm Middle right - 7 mm Rear left - 9 mm Rear right - 9 mm

Condition: used, This listing is for the Thermo Scientific ClearVue Coverslipper The units are in full working condition and are ready for immediate use Rjdpfx Ameyt Ilasyscd The Thermo Scientific ClearVue Coverslipper is an automated, high-throughput system designed to streamline slide preparation in pathology and histology laboratories. It is engineered to deliver high-quality, consistent results with minimal manual intervention Key Features and Performance - High Throughput: The system can process up to 250 slides per hour. It can handle up to 11 slide baskets simultaneously through a load-on-demand system. - Specimen Recognition: The system automatically identifies the type of slide preparation (histology vs. cytology) and adjusts the mountant volume. - Stainer Compatibility: It is compatible with various slide stainers, including:Thermo Scientific Varistain Gemini ES and 24-4. - Sakura Tissue-Tek DRS 2000 series. - Leica Auto-Stainer - Pre-loaded Hoppers: The system uses pre-filled coverslip hoppers (holding 500–575 slips) to reduce glass handling and prevent contamination or fingerprints. - Optical Recognition: Sensors ensure proper slide positioning. The system uses vacuum and pressure to mount the cover glass accurately without bubbles

Condition: excellent (used), I'm selling a lightly used spray washer from the Danish company Compact, model 1000-H. The machine is ready to work without leaks. We can work on site or send a video. The raised version, which is standard 70 cm high, is 100 cm above the basket. The version is made entirely of stainless steel and is additionally insulated. It sprays from the bottom, top, and side. Adjustable operating time and temperature. The basket diameter is 100 cm. The tank holds 330 liters. It weighs 800 kg. It has a 500 kg load. It has a steam extraction fan. Possible transport within the EU Rcodpfxjzqd Tys Amysd

Condition: excellent (used), color: black, lifting height: 23,500 mm, Year of construction: 2020, operating hours: 93 h, General information Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 2.500 kg Functional Lifting capacity: 800 kg Dimensions of cargo space: 782 x 204 x 232 cm Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K17/24 * 2020 * Petrol drive * 93 working hours * 23.5 meter hook height * 18 meter horizontal reach Rcedexzdv Aspfx Amyed * 800 kg lifting capacity * Remote control * Equipped with work lights * Wheel drive * Prepared for a man basket * Includes documentation

Condition: excellent (used), Year of construction: 2023, operating hours: 837 h, mast type: triplex, fuel type: electric, color: other, Empty weight: 1.532 kg Rcedszqdr Nopfx Amysd Dimensions (LxBxH): 388 x 84 x 198 cm Mast: articulated arm Lifting capacity: 230 kg Working height: 1.080 cm Maximum reach: 620 cm CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Non marking tires - Radio remote control - Rotation function - Rubber tracks - Support legs = Remarks = General Country of production: Italie The smallest and most compact Bluelift spider lift of its kind!, Extendable undercarriage, radio remote control, German and Dutchinspection book, Inspection valid until 06-2027, Removable basket, Fully electric drive via Lithium battery

Condition: like new (used), Year of construction: 2000, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mmDistance between columns: 2700 mm Milling head Milling head model 1: UAGA orthogonal auto-indexing BC (2,5º)Tool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 3000 rpmSpindle power: 30 kW Milling head model 2: FA large vertical spindleTool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 3000 rpmSpindle power: 30 kW Milling head model 3: Direct spindleTool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 5000 rpmSpindle power: 37 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 KgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5738 x 5850 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceMilling head changer: Semi-automatic with hinges on columnAutomatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high-pressure through spindle (only in direct spindle) Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Rcodpfx Amoznpczsyjd

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Rodpfjyf Rrtex Amyecd

Condition: used, Year of construction: 2024, operating hours: 25 h, Caterpillar engine (kW/HP): 340 / 460 Discharge height: 2,898 mm (tracked version) Discharge height: 1,830–4,151 mm (at 35°) Shredding unit: • Screen basket: 250 mm (other sizes available, including 80 / 100 / 125 / 150 / 180 / 250 / 300 mm) • Roller speed (min⁻¹): – Hydraulic drive, max. 32 Rcsdozqbhnspfx Amysd • Roller length: 2,820 mm • Roller diameter: 610 mm Throughput, depending on the material: up to approx. 60 t/h Weight: approx. 25.7 t Transport dimensions – L × W × H (mm): 6,940 × 2,854 × 3,268 (tracked version) Working position L × W × H (mm): (conveyor belt 35°): approx. 11,372 × 3,290 × 4,151 Further features: Slow-speed, 2-shaft shredder for wood and green waste Very well suited for green waste, tree stumps, and all types of wood waste, as well as old wood Optional screen baskets available upon request: 80 mm round, 100, 125, 150, 180, or 250 mm (among others)

Condition: new, GRATINGS FOR PALLET RACKING 270CM/110CM SHELVING BAYS Gratings for pallet racking 270 cm x 110 cm bays Data : - Length per module : approx. 890 mm - Width per module : approx. 989 mm - total width : approx. 2670 mm - total depth : approx. 1095 mm - suitable for 2700 x 1100 mm shelf bays - 1 level consists of 3 pcs. Gratings - Edging : T-profile 42 mm - Mesh size : 80 x 40 mm - Load capacity: 1000 kg per grating, with evenly distributed load - Surface : hot-dip galvanized - New from stock -AVAILABLE SEVERAL TIMES! Price: 189,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Redpfx Aszqah Hemyjcd Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, tire condition: 80 %, Year of construction: 2021, front tire size: 80%, rear tire size: 80%, maximum speed: 80 km/h, First registration: 2021. We are selling our demonstration vehicle Goupil G6 with a 28.8 kWh lithium battery, vehicle class N1. Range (according to WLTC and proven in practice) up to approx. 110 km. LCD HD color display, light and rain sensor. 5000W electric heater, power steering, front and rear LED lights, regenerative braking, doors with electrically adjustable and folding mirrors, electric windows, underbody protection, tow bar with ball hitch, braked towing capacity: 1,700 kg (in line with German road traffic regulations - StVZO). Transport and tool box behind the cab. Radio with MP3 and Bluetooth, LED beacon, driver seat heating, vehicle function control switches in the cab. Short tipper body with 3 folding aluminium side panels, mesh superstructure for combination vehicles. Further details available upon request. Location: 93095 Hagelstadt. Rsdpfx Amjyq Atajyocd

Condition: good (used), Year of construction: 2018, lifting height: 14,350 mm, fuel type: diesel, Weights Rcjdpfxoznlcwe Amyed Empty weight: 3.350 kg Functional Lifting capacity: 200 kg Working height: 1.635 cm Working width: 212 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 990 m Max swing of platform in degrees: 350 Additional information Please contact Christian Theißen for more information Manufacturer: Multitel Model: 160ALU Year of build: 2018 Condition: Used Data: Max. working height: 16,35 m Max. platform height: 14,35 m Max. reach: 9,90 m Total dimensions LxWxH: 6,78 x 2,12 x 2,80 m Platform dimension WxD: 1,20 x 0,70 m Max. basket load: 200 kg Swivel range of the upper carriage: 350° Ground clearance: 0,20 m Support width vertical: 2,17 m Support length: 3,28 m Ground pressure: vorne: 24 kN / hinten: 12 kN Driving license category: B / 3 Empty weight: 3.350 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, loading area with side walls, box body for materials: 1.50 x 0.50 x 0.50 m. Information: 8672 front damage Information: Tüv und UVV new Location: 41468 Neuss immediately available