Used Merlo for sale (81)

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Nwedpfjyv S Ufsx Ahkjk Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, machine/vehicle number: 1101, Year of construction: 2018, overall weight: 400 kg, total height: 1,050 mm, total length: 2,230 mm, total width: 1,100 mm, More detailed information and additional images are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for the accuracy of all information provided. Nwodpfx Ahjzt Sibekjk

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,337 h, Operating hours: 2337, First registration: 05/24/2022. Price: 59,000.00 Euro net. Year of manufacture: 2022. Operating hours: approx. 2200. Max. lifting capacity: 3,300 kg. Max. lifting height: 6,600 mm. Max. reach: 3,500 mm. Length to the carrier: 4,310 mm. Width: 2,100 mm. Height: 2,120 mm. Total weight with load forks: 6,500 kg. Total weight without load forks: 6,330 kg. Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled. Power: 85 kW (115 hp) at 2,300 rpm. Stage V. Diesel particulate filter, oxidation catalytic converter, and SCR catalytic converter with AdBlue injection (DPF + DOC + SCR). Hydrostatic drive. Pump: electronically controlled with variable displacement. Motor: variable motor. EPD TOP incl. with optional automatic speed increase. Mineral hydraulic oil HVI 46. Transmission: 2 gears, electro-hydraulically controlled. Max. speed = 1st gear / 2nd gear = 16 / 20 km/h, optionally 40 km/h. Cab: enclosed cab, split door, 360-degree panoramic view. GRAMMER air-suspended seat with safety lap belt. ROPS/FOPS tested. Heater. Front, roof, and rear window wipers. Sun visor. 4x1 joystick electronic with capacitive activation incl. direction of travel switch. Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop). Carrier: quick-change system, type "ZM2", hydraulically controlled from the cab. Steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering. Drive: permanent all-wheel drive. Axles: front axle fixed, rear axle oscillating. Braking system: servo-assisted disc brakes on all four drive axles, automatically acting parking brake when the engine is stopped. Hydraulic system: pump with variable displacement of the "LOAD SENSING" type. Flow rate of working hydraulics: 125 l/min. Flow rate of hydraulic fan: 46 l/min. Total flow rate: 171 l/min. Working pressure: 210 bar. Flow-sharing control valve. Electrical system: 12 V. Battery with 100 Ah. Alternator 120A. Stability control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement recognition, and overload shutdown. Special equipment: Tires: 400/70-24 158A8. Rear hydraulic connection with separate control. EU approval as a tractor/agricultural tractor, 40 km/h. Trailer coupling, height-adjustable, self-locking, 30/32 mm pin, incl. connection for trailer lighting. Air conditioning. Vibration damping on the boom (B.S.S.). LED rotating beacon on the cab roof (approval is the customer's responsibility!). LED work lights on the cab (2 front, 2 rear) instead of the standard halogen lights. 2 work lights at the end of the first arm (basic arm). ASCS upgrade: display with all ASCS functions + continuous flow at the front. Location: Gartenbau Leufgen. Nsdpfsupq Tqex Ahkewk

Condition: used, power: 84 kW (114.21 HP), lifting height: 6,700 mm, Year of construction: 2000, operating hours: 11,625 h, fuel: diesel, load capacity: 2,700 kg, • Telescopic boom • 2.7T capacity • 11,625 operating hours Nwjdpfxey Hmnbe Ahkok • PERKINS engine

Year of construction: 2018, condition: used, overall weight: 400 kg, product width (max.): 2,230 mm, machine/vehicle number: 480040, enginetype: undefined, manufacturer: Merlo Njdpjzt Uh Tsfx Ahkewk

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,354 h, maximum speed: 40 km/h, Operating hours: 1354, First registration: 10/11/2022. Basic equipment / technical data: max. load capacity 4,200 kg, max. lifting height 7,000 mm, max. outreach 3,800 mm, length to carriage 4,730 mm, width 2,310 mm, height 2,530 mm / 2,590 mm (CS activated), total weight with forks 8,170 kg, total weight without forks 8,000 kg, engine 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 105 kW (143 hp) at 2,300 rpm, hydraulic reversing fan, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR), hydrostatic drive, pump: electronically controlled with variable flow rate, motor: swashplate motor, EPD TOP including optional automatic speed increase, mineral hydraulic oil HVI 46, transmission 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h, cab: enclosed cab, split door, 360-degree all-round visibility, V3611 GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS tested, heater, front, roof and rear window wipers, sun visor, 4x1 joystick electronic with capacitive activation including direction switch, CS = hydropneumatic vibration damping of the cab, telescopic boom 2-part with electronic end damping "Soft Stop", carriage quick-change system type "ZM2" hydraulically controlled from the cab, steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering, drive: permanent all-wheel drive, axles: front axle fixed, rear axle oscillating, braking system: servo-assisted disc brakes on all four drive axles, automatic parking brake when engine is stopped, frame construction: in high-strength steel, hydraulic system: pump with variable flow rate of type "LOAD SENSING", flow rate working hydraulics: 150 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 196 l/min, working pressure: 250 bar, flow-sharing control block, electrical system: 12 V, battery with 100 Ah, alternator 120 A, stability control: simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload cut-off, tires: 460/70 R 24 Michelin XMCL, standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cab (2 front, 2 rear), preparation for additional function at the boom head, 2 hydraulic connections at the boom head, load protection grille on the carriage, lighting for road travel, automatic battery master switch, electrical connection cable in the boom, acoustic signal when reversing, lifting cylinder support for securing, optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, self-locking, 30/32 mm pin, including connection for trailer lighting, height-adjustable version recommended for compact and medium, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cab roof (approval is the responsibility of the customer). Nodpfetu Sztjx Ahkjwk

Condition: good (used), machine/vehicle number: 53960854045014, Year of construction: 2020, operating hours: 583 h, load capacity: 4,950 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: other, overall weight: 16,600 kg, enginetype: Diesel, manufacturer: Merlo Nwsdpfx Aezp Ubfohkjk

Condition: good (used), machine/vehicle number: 53960854045014, Year of construction: 2020, operating hours: 1,817 h, load capacity: 4,950 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: other, overall weight: 16,600 kg, 5223264 Der Merlo R 50.26S ist ein leistungsstarker, drehbarer Teleskopstapler, der für vielseitige Einsätze in Bau, Logistik und Industrie konzipiert wurde. Mit einer beeindruckenden maximalen Hubhöhe von 26 Metern, einer seitlichen Reichweite von 22,9 Metern... Nodpfxozqbz Is Ahkowk

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Nwedpfx Ahepcht Hskjk

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler was serviced three months ago. During this maintenance, among other tasks, the slew ring bolts were replaced, and both machine and hydraulic oils were serviced. TECHNICAL DETAILS Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Lifting capacity at max. height: 1,500 kg Lifting capacity at max. outreach: 150 kg Slewing turret rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine power: 107 kW / 145 HP Fuel tank: 150 l Performance Speed 1st gear: 16 km/h Speed 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrics System voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent four-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS approval Electronic joystick control Merlin control system Tac-Lock carriage Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent four-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch direction control Hydrostatic transmission Pneumatic seat Nedpfx Aexr Axdjhkswk Note: The winch (€4,000) and the platform (€1,000) can be purchased separately if required.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Nodox Dmgvepfx Ahkjwk Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) Njdpouycgfjfx Ahkewk - 2 work lights on the first boom section (base boom) - AS

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Technical condition: New Nwjdpjxntnbjfx Ahkjk Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Total weight without load forks: 9,700 kg Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Nwedpfjzpcu Tox Ahkek Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Hydraulic quick-coupling system Electrical system: 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Year of construction: 2009, condition: used, overall weight: 100 kg, load capacity: 4,500 kg, product width (max.): 720 mm, machine/vehicle number: 1103, enginetype: undefined, manufacturer: Merlo Nwjdpfxezuqxqo Ahkek

Condition: good (used), machine/vehicle number: 51617486799190, Year of construction: 2020, operating hours: 2,814 h, load capacity: 4,950 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: other, overall weight: 15,800 kg, 5004225 Der Merlo R 50.21 S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 20,80 Metern und einer maximalen Traglast von 4.950 kg bewältigt er auch schwere Lasten problemlos. Bei maximale... Njdpfxszqby De Ahkowk

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 3 h, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,000 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Mast type: Telescopic Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml Nodpoznfqnefx Ahkswk

Year of construction: 2015, condition: used, overall weight: 100 kg, load capacity: 4,500 kg, product width (max.): 720 mm, machine/vehicle number: 1102, enginetype: undefined, manufacturer: Merlo Nodpfx Aozuqxwehkswk

Condition: good (used), functionality: fully functional, fuel type: diesel, color: green, empty load weight: 8,650 kg, lifting power: 3,800 kg/m, lifting height: 12,600 mm, mast type: telescopic, Year of construction: 2017, Equipment: cabin, pallet forks, ID111069 MACHINE: Telescopic handler BRAND: Merlo MODEL: P38.13EE Panoramic YEAR: 2017 ENGINE: Diesel OPERATING HOURS: unknown TRANSMISSION: automatic DRIVE: 4WD MAST: Telescopic CAPACITY: 3800 kg LIFTING HEIGHT: 12.6 m TYRES: Standard CONDITION: Good Nwjdpfx Ahszhmz Ijkek

Condition: good (used), machine/vehicle number: 53935954002262, Year of construction: 2020, load capacity: 4,000 kg, lifting height: 15,700 mm, fuel type: diesel, mast type: other, overall weight: 12,900 kg, 5162632 Unser Merlo R 40.16S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 15,70 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximal... Njdpfxozqbzzs Ahkswk

Condition: good (used), machine/vehicle number: 54957749567830, Year of construction: 2020, operating hours: 1,606 h, load capacity: 4,000 kg, lifting height: 15,700 mm, fuel type: diesel, mast type: other, overall weight: 12,900 kg, 5250633 Der Merlo R 40.16 ist ein kraftvoller drehbarer Teleskoplader, der speziell für anspruchsvolle Anwendungen entwickelt wurde. Mit einer Tragfähigkeit von 4.000 kg, einer Hubhöhe von 15.800 mm und einer maximalen Ausladung von 13.100 mm überzeugt er durc... Nwodpfx Ajzt Uumehkjk

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,400 kg, lifting height: 8,800 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 9,530 kg, total length: 5,570 mm, drive type: Diesel, construction width: 2,400 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Njdpfxozhypro Ahkjwk Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml

Condition: good (used), machine/vehicle number: 48706927067478, Year of construction: 2018, operating hours: 3,135 h, load capacity: 4,000 kg, lifting height: 26,050 mm, fuel type: diesel, mast type: other, overall weight: 16,000 kg, 4745055 Der Merlo Roto 40.26 MCSS Schwerlast-Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 26,05 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwerste Lasten probl... Nwjdpfszqb Dcjx Ahksk

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 13,000 mm, mast type: triplex, Year of construction: 2017, operating hours: 2,111 h, Technical information Number of cylinders: 4 Engine capacity: 2.900 cc Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Functional Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good Nodpfx Ahjzg Ad Njkjwk = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Hydraulic quick coupler - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Italie Pallet forks, hydraulic quick coupler, CE and complete (German) documentation present

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Nodpfx Ahjxfm Nyekowk Mast type: Telescopic Technical condition: New Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml