Used Mep Cobra for sale (115)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Iaodpfx Ahefg E H Ro Nsl Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: like new (used), Overall length: 1500 mm Width: 500 mm Adjustable height with adjustable feet: +/- 900 mm Iajdpfx Ahsfn Thhs Nel 6 rolls, diameter: 60 mm Roll width: 430 mm

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm Iaodpfoftmxvjx Ah Nel * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm Iajdpfx Aod Aai Toh Nol -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC Iedpfxjwu Hhde Ah Neal Machine is immediately available from stock, subject to prior sale

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min Iaedpfx Ahera Rrlo Nsl weight of the machine ca. 1050 kg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Iaodpefg Rlbjfx Ah Nel Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, Length: 1500 mm 6 rollers made of tubular steel, width: 185 mm Iaedpfx Ahsfxu Tke Njl Diameter: 20mm Height continuously adjustable: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm Isdpfsp Ebn Sjx Ah Neal - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Iaedjfmck Hepfx Ah Nel Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts Optional base frame 361 euros

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional Ijdpfsfg E H Esx Ah Nsal semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg dimensions of the machine ca. m Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Iedefg E H Njpfx Ah Njal Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Iedpsfg E Hysfx Ah Nsal Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! Iajdpfx Aefg E H Djh Nsl •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Ijdpfx Ahofg E H Ts Njal Bimetal saw band for solid and profile material Tools and instructions for use

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm Isdpel R Nnnjfx Ah Nsal capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. Iaedpfsfm T Hbsx Ah Nel The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Isdpfx Aefgpdljh Njal Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m Iasdpfofg E H Iex Ah Njl MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension Iasdpfx Ahofg E H Se Nel * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm Isdpofg Rlcefx Ah Njal saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Year of construction: 1989, condition: used, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm Iaedpfxsi Df D As Ah Nol 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,6 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Iaodpfxofg E Hze Ah Nsl + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language. Ijdpfefg E H Usx Ah Neal

Condition: used, Year of construction: 2002, cutting diameter 210 mm Ijdpfx Aewkvqtjh Njal capacity 90 degrees: flat 270 x 200 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 180 x 190 mm capacity 45 degrees: square 180 mm vice 200 mm turning speed range: 36/72 m/min dimensions of saw-band 2750 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,95 x 1,7 x 1,9 mm Bandsaw machine with: - Miter 45 ° right - Miter on turntable adjustable - Coolant system