Used Mechanical Grinding Machine for sale (68,332)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Codpfxjvvkipo Albohb

Condition: used, Year of construction: 2022, Oscillating cylindrical grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. It uses something similar to a ProLoc device. Chodewhqprjpfx Albjb Location: Nattheim.

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. A device similar to the ProLoc system is used. Csdpfx Aljwhqplebshb Location: Nattheim.

Condition: ready for operation (used), workpiece diameter (max.): 50 mm, Ready-to-use centerless with spare wheels, can be tested on site! Cedjyvn A Sjpfx Albehb

Condition: used, JONES AND SHIPMAN EIT 1076 PRODUCTION CYLINDRICAL GRINDING MACHINE Chodpfjzw U Twsx Albob MADE IN ENGLAND CAPACITY: 250 x 700.0mm DROP DOWN INTERNAL SPINDLE VARIABLE SPEED HEAD METRIC DIALS UNIVERSAL BED PAPER FILTRATION SYSTEM AUTO CYCLE

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Cedpfx Ajf Um Raolbjhb Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. Cjdpfx Alsq I N H Nsbehb 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Cjdpfx Asq Nf Uwolbehb 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Table surface: 850 x 400 mm Magnetic table: 800 x 400 x 105 mm Max. table travel (X x Y): 950 x 440 mm Max. workpiece weight: 700 kg (230 kg on the magnetic table) T-slots on the table: 3 pcs x 17 mm Distance between table and spindle center: 47,5 – 547,5 mm Grinding wheel dimensions: D355 x 38 x d127 mm Spindle speed: 1500 / 1800 rpm (50Hz / 60Hz) Spindle drive power: 3.7 kW / 4.0 kW Longitudinal travel: 3 – 25 m/min (hydraulic and stepless) Cross travel: 1 – 1000 mm/min Vertical feed rate: 1 – 1000 mm/min Minimum increment / feed amount: 0,0001 mm – 0,0002 mm Machine weight: 4000 kg Dimensions (L x W x H): 3310 x 2228 x 2710 mm Accessories / Equipment - Semi-automatic operation - Magnetic table 800 x 400 mm - Coolant system with magnetic separator - Paper band filter - Machine feet Chedpsy T Nuwefx Albob - Digital display system for the infeed / increment - Built-in wheel dresser in the spindle head The machine is being sold due to company liquidation. It is in good condition and still under power in Hungary.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 81 h, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, Available for sale is a NS LMD2500 2Z long belt grinding machine, built in 2022 and in as-new condition. The machine has only 81 operating hours. Machine Details Manufacturer: NS Model: LMD2500 2Z Codpfx Aoy Httqslbehb Machine Type: Long Belt Grinding Machine Year of Manufacture: 2022 Operating Hours: 81 Condition: As New The machine is fully operational and available for inspection by appointment. If you have any questions or would like further information, please feel free to get in touch by message.

Condition: ready for operation (used), functionality: fully functional, ABA – Aschaffenburg Plant / Hand-lever surface grinding machine FFK - Magnetic plate approx. 300x150 mm - Working area approx. 300x150x150 mm - Grinding wheel dimensions approx. 200x20x76 mm - Spindle speed approx. 2800 rpm - Table adjustment, longitudinal / Manual - Table adjustment, transverse / Manual - Height adjustment / Manual - Magnetic plate / Permanent magnet - Grinding wheel guard - Dust extraction Csdpfx Aezypkpelbjhb Dimensions: L x W x H 1.1 x 1.1 x 1.8 meters / Weight 850 kg Errors and omissions excepted.

Condition: repair required (used), The TSCHUDIN HTG400 is available as a source of spare parts. Mechanically, the machine is in good condition. Electrically, the machine needs to be inspected and repaired. The drive motors are in good condition. The machine is being offered as a source of spare parts. Chjdpfx Ajyt E Irelbsb

Condition: new, Year of construction: 2026, CORMAK PSM200 – Industrial Mobile Belt Grinder for Metal The CORMAK PSM200 is an industrial-grade mobile belt grinder for metal, designed for intensive grinding, deburring, and polishing of large surfaces, weld seams, and workpieces that are difficult to process on stationary machines. Thanks to its integrated dust extraction system and compact design, it enables efficient operation in changing workshop conditions and directly on assembly sites. Main Advantages Belt grinder with dust extraction – the integrated dust extraction system provides a clean and safe working environment. Mobility and compact design – ideal for workshop and assembly applications. Robust construction – the rigid frame ensures high machining accuracy even under intensive use. High grinding efficiency – optimized for grinding surfaces and weld seams. Adjustable depth stop – enables precise control of the material removal depth. Easy and quick operation – ergonomic design and a simple control system. Construction and Technology The CORMAK PSM200 is based on a robust construction designed to ensure stability and vibration damping, significantly improving operating comfort and precision. The 2.8 kW motor, powered by a single-phase 230 V supply, provides sufficient power reserve for continuous operation. The machine is equipped with a Ø200 × 300 mm flap wheel, ideal for smoothing edges, flat surfaces, and irregular metal surfaces. The integrated dust extraction system improves operator safety by reducing exposure to grinding dust. Precision and Performance The CORMAK PSM200 grinder has been designed for demanding industrial applications. The large working tool diameter and precise control of the machining depth enable consistent results, even when processing large workpieces. The adjustable grinding depth allows the operator to adapt the machine to the specific task, minimizing setup and changeover time. Applications The machine is designed for: welding and metalworking workshops, manufacturers of steel structures, railings, and tanks, industrial plants processing components that are difficult to clamp, service and maintenance teams, work carried out directly at assembly sites or in serial production. Standard Equipment Ø200 × 300 mm flap wheel Dust extraction system with filter Cjdpfjzynnyjx Albohb Robust construction with adjustable depth stop Power cable with 230 V plug Protective housing for working components Technical Data Parameter Specification Power supply 230 V Motor power 2.8 kW Flap wheel size Ø200 × 300 mm Packaging dimensions 700 × 1000 × 600 mm

Condition: used, Year of construction: 1995, Frame grinding machine LÖWER Type LZ 1 Working width 280 mm Working height 120 mm Arbor diameter 35 mm Table length 1100 mm Cjdpfx Aljzynpkobshb

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 155847, Round grinding machine Knuth RSM 1000, year of manufacture 2012, fully functional, with internal grinding attachment. Condition: fully functional Year of manufacture: 2012 Location: West Saxony Price: on request Technical data: Manufacturer: Knuth Werkzeugmaschinen GmbH Type: RSM 1000 Serial number: 155847 Power: 9.5 kW Grinding length: 1,000 mm Grinding diameter: up to 320 mm Center height: 180 mm Dimensions: L 3,600 × W 1,650 × H 1,800 mm Machine weight: approx. 3.7 t Equipment: Digital 2-axis position display (DRO) Internal grinding attachment (standard) Steady rest (standard equipment) Central lubrication system Coolant system Cedpjzyltmsfx Albohb Description: For sale is a Knuth RSM 1000 round grinding machine, manufactured in 2012, with a digital 2-axis position display. With a grinding length of 1,000 mm and a grinding diameter of up to 320 mm, the machine is suitable for both single-part machining and small-batch production. It comes standard with an internal grinding attachment and a steady rest for machining long workpieces. The machine is fully functional. Inspection and test run possible at the location in West Saxony by appointment. Price: on request Other machines available from site liquidation Takeover of the location negotiable.

Condition: good (used), Year of construction: 1989, functionality: fully functional, center height: 175 mm, center width: 1,000 mm, We are offering this well-maintained KELLENBERGER 1000U cylindrical grinding machine, manufactured in 1989. It underwent a partial overhaul in 2009. This machine would be used as a secondary unit and has seen very little use. Manufacturer: KELLENBERGER Chjdpoy Uq S Hefx Albeb Model: 1000U Year of manufacture: 1989 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Cjdpfxjxpqy Re Albohb Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: good (used), Year of construction: 2014, Offered here is a centerless cylindrical grinding machine from the manufacturer Tschudin, including automation. The machine is in very good condition and can be inspected upon request. Technical data – see PDF. Cedpfx Aox Urh Aelbjhb

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Specifications: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Csdpfsyyn Ehsx Albehb Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: used, Year of construction: 1995, operating hours: 9,000 h, functionality: fully functional, center height: 225 mm, grinding length: 1,600 mm, STUDER S40 CNC Universal Cylindrical Grinding Machine with Polygon Grinding Attachment For sale is a STUDER S40 CNC universal cylindrical grinding machine, manufactured in 1995, with a GE Fanuc Series 16-GC control system and a polygon grinding attachment. The machine is equipped for various cylindrical grinding tasks and enables, among other things, face, plunge, internal, and cylindrical grinding. Additionally, the machine is equipped for polygon grinding. Technical Data Manufacturer: STUDER / Studer AG Model: S40 CNC Year of manufacture: 1995 Machine No.: 011.0166.60.028 Control system: GE Fanuc Series 16-GC Center distance: 1,600 mm Cross slide X: max. 275 mm Resolution: 0.0001 mm Maximum table swivel: 8.5° Equipment – Polygon grinding attachment – 2 grinding wheels plus 1 internal grinding unit, selectable via the control system – Face, plunge, internal, and cylindrical grinding – Automatic truing device Chodpfx Aezw E Npolbob – Steady rest – Magnetic chuck – Three-jaw chuck – Collets – Grinding between centers – Cycle control – DXF import – Grinding wheels in corundum, diamond, and CBN available – STUDER hand-held control unit The machine is in used condition with signs of wear and tear consistent with its age and use. An inspection is possible after prior arrangement. Price: €60,000 negotiable plus VAT. Location: 74343 Sachsenheim Collection/shipping by arrangement. Errors, changes, and prior sale reserved.

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Standard workpiece headstock MK5 with adapter flange DIN 55027, size 5 - Splash guard hood for the above - Tailstock with fine adjustment, MK4 - Internal grinding attachment with protective cover for grinding spindle D:80 mm for belt-driven spindles - FISCHER internal grinding spindle type HJN 842, incl. grinding mandrels (4 pieces, choice) - HJNZ 42 collet chuck - Oil mist lubricator for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axes - Sine bar on the workpiece headstock incl. alignment arbor MK5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet attachment for Schaublin collets B32 - Set of B32 collets, D: 1.0–30.0 mm, increment 0.5 mm (59 pieces) - Dial indicator stop for table swivel with indicator 0.01 mm - Table fixed stop - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic table load relief - Swiveling dressing device for external, face, or internal grinding operations - Set of vibration damping pads - New three-color paint finish (light grey RAL 7035 / blue RAL 5012 / dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation Chjdpjyf E Susfx Albsb - CE conformity The machine is currently being overhauled, sample photos shown!

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table) Chsdpsza Dwxsfx Albob  2 diamond cup wheels 175x60x51 mm  Column design

Condition: ready for operation (used), Year of construction: 1989, Semi-automatic broach sharpening machine 3M601Ф1 Manufacturer: Vitebsk Tool Grinding Machines Specifications: Chodjzx Timspfx Albob Max. external diameter of round broaches: 250 mm Max. workpiece length (between centers): 2000 mm Application: Round, spline, flat, face, and keyway broaches.

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke during orbital grinding 190mm Chedpfjzx R Awsx Albjb -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics -Further accessories (SEE PICTURES) -Documentation -Tool cabinet Errors and omissions excepted.

Condition: good (used), Year of construction: 1995, Deckel SOE tool grinding machine, manufactured in 1995. Accessories: collets, various grinding wheels. In good, operational condition. Codpfxjzx Rwuo Albjhb