Used Mazak Integrex 400 Iv for sale (336)

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Hfodpfx Aox Rkvqeh Nob Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Year of construction: 2017, condition: like new (used), Buyer must demount the machine at our factory in Daugavpils Latvia. Hsdpfein E Uuox Ah Njfb we assist with 2 men, crane and forklift.

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 1,000 mm, Mint machine with tool holder TOP Hjdpfxou Ez Npj Ah Nefb

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Hedpfji Eb Drjx Ah Nofb

Condition: used, Year of construction: 2017, New spindel 2025-08 yearly service by Mazak Servicecenter. includes bar feeder Super 80 Max swing Ø 658 mm Swing over X-slide Ø 658 mm Swing when Y-axis is operating Ø 658 mm Max turning diameter Ø 658 mm Max turning diameter from bar Ø 51 mm (option Ø 65) Max part length 1011mm X axis: 615mm Y axis: +/-130mm z axis: 1077mm B axis: 0,0001Deg / 240° Spindle 1 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole 51 mm (option Ø 65) Spindle motor AC 22 kW 40% ED Speed range 35-5000 rpm Number of speed ranges Direct drive Max torque 467 Nm 25% ED Max part weight including chuck 300 kg Center height from floor 1235 mm Spindle 2 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole Not applicable (option Ø 65) Spindle motor AC 18.5 kW 40% ED Speed range 33-5000 rpm Number of speed ranges Direct drive Max torque 325 Nm 40% ED Max part weight including chuck 300 kg Center height from floor 1235 mm C-axis 1 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree C-axis 2 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree W-axis Movement 1066 Rapid feed 30 m/min B-axis B-movement 240 degrees Max machining feed (ISO) 40 rpm Minimum programmable increment 0.0001 degree Tool Holder Type: Tool changer Tool Shank Size: 25 x 25 mm Tool Change Time, tool to tool: 1.3 seconds Chip-to-chip time, average: 8 seconds Tool Holder for rotating tools: Capto C6 Tool Holder for turning tools: Capto C6 Max Tool Weight: 12 kg Max Tool Length: 400 mm Clamping Force for Tool (Capto C6): 33 kN Tool Magazine: Number of tool positions: 36 pcs Max Tool Diameter: 90 mm Max Tool Diameter when the position before and after is empty: 125 mm Hodpfxox Hfl Eo Ah Njfb Max Tool Length: 400 mm Max Tool Weight: 12 kg Max Torque for Tool: 9.8 Nm Other: Length: 3990/4910 mm Width: 2800 mm Height: 2720 mm Weight: 13100/16600 kg Power Requirement, continuous: 72.34 kVA Air Requirement, min: 5 kg/cm², 410 liters/min Tool Magazine: 36 tools Standard Equipment: B-axis Capto C6 ATC Auto Recovery Auto power on/off, heating schedule 19” LCD touchscreen Mazak tool identification system including 10 ID chips (for Capto C6) Measurement arm for tool length setting, automatic compensation, and tool breakage detection 8” Chuck Type: Kitagawa B208A6 8” Chuck Type: Kitagawa B208A6 Coolant Tank Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min Set of Manuals: (digital) Smooth Standard Software: Mazacc 2D software (shape comp) Mazacc 2D software för roterande axlar (shape comp) Mazacc 3D High Speed software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA Programming: Lathe and milling spindle start unsynchronized Synchronized threading with rotating tools Macro interruption allowing event-driven ISO/EIA programs Macro programming with 600 additional variable pairs for ISO/EIA Helix interpolation for ISO/EIA Coordinate rotation with G68 for ISO/EIA Polar coordinates, G122 for ISO/EIA Synchronized interpolation X-C-axis G12.1 for ISO/EIA Coordinate systems G54 - G59 + 300 additional for ISO/EIA Direct input of drawing dimensions, e.g. starting corner for ISO/EIA Inverse Time Feed (G93) 3D Cutter Compensation (G40-G42)

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand MAZATROL Model PC-FUSION-CNC 640MT Hodpfx Ahsx D Ip Ee Nofb Main Drive Number of axis 5 Tools Number of index 40 Type of tool holder Capto C6 This 5-axis MAZAK Integrex 300-II Y was manufactured in 2002. If you are looking to get high-quality turning capabilities, consider the MAZAK Integrex 300-II Y machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2016, MAZAK Integrex i-300 1000U Max. machining diameter: 658 mm Max. machining length: 1,010 mm Max. main spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - Mazatrol SmoothX CNC control - SCHUNK three-jaw chuck, diameter 254 mm - Tool Eye Hsdpfex A Ub Eox Ah Njfb - C-axis - Y-axis - Number of tool positions: 110 !!! - Tailstock - Reinforced coolant pump - Chip conveyor

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Hfodjx Atyaopfx Ah Njb

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, Hfjdpfx Ahju Rb Snj Nsb swarf conveyor

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Hodpfx Aji Eb Dneh Nefb

Condition: used, Year of construction: 2005, Mazak Integrex 300 - III turning and milling center, year 2005, CNC 640 MT control, travel X/Y/Z 630/230/1,585 mm, B axis NC swiveling head -30°/+195°, 80-position Capto tool magazine, main spindle 26 kW, C axis 0.001°, tailstock MK 5, high-pressure coolant 70 bar with filter system, Tooleye, 5-axis simultaneous machining package, Mazak Monitoring System, chip conveyor. Hfjdpev I S Rrjfx Ah Nsb

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Hjdex D N Ipopfx Ah Nefb Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2022, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 328827, turning length: 900 mm, turning diameter: 600 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 61 mm, travel distance X-axis: 535 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 900 mm, mount diameter: 600 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, milling spindle length: 300 mm, rotational speed (max.): 20,000 rpm, type of input current: three-phase, torque: 184 Nm, bar passage: 61 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, bar diameter (max.): 61 mm, overall weight: 12,000 kg, spindle diameter: 152 mm, Equipment: documentation/manual, The machine is equipped with the latest Mazatrol SmoothAi control, fitted as standard. The ease of conversational program creation in Mazatrol mode is ensured by the intuitive layout of auxiliary functions, supported by graphical and, above all, clear prompts and comments. TOOL HOLDERS SHOWN IN THE PHOTOS ARE INCLUDED IN THE PRICE. STANDARD TECHNICAL SPECIFICATION Working area Main spindle chuck size 6" Second spindle chuck size 6" Max. turning length 600 mm Standard machining diameter (from upper head) 600 mm Standard machining diameter (from lower head) 400 mm Bar machining capacity in main spindle 51 mm Bar machining capacity in sub-spindle 51 mm Main spindle Maximum spindle speed 6,000 rpm Minimum spindle speed 35 rpm Through-hole diameter 61 mm Motor power (40% duty) 11.0 kW Motor power (continuous) 7.5 kW Hedpfx Aoxzk Sweh Njfb Max. torque (15% duty) 184 Nm Max. torque (25% duty) 161 Nm Max. torque (40% duty) 143 Nm Maximum torque (continuous operation) 105 Nm Second spindle Maximum spindle speed 6,000 rpm Minimum spindle speed 35 rpm Through-hole diameter 61 mm Motor power (40% duty) 11.0 kW Motor power (continuous) 7.5 kW Max. torque (15% duty) 184 Nm Max. torque (40% duty) 143 Nm Maximum torque (continuous operation) 105 Nm Milling head Type Single spindle with automatic tool changer Tool holder HSK-A63 / HSK-T63 Tool size (external diameter machining) 25 mm Tool size (internal diameter machining) 40 mm Tool size (max. milling tool diameter) 130 mm Tool size (max. milling tool length) 300 mm Motor power (40% duty) 24.0 kW Motor power (continuous operation) 14.0 kW Max. torque (15% duty) 59.7 Nm Torque (40% duty) 57.3 Nm Torque (continuous operation) 46.1 Nm Max. milling spindle speed 20,000 rpm Min. milling spindle speed 35 rpm Feed axes Rapid traverse X 48 m/min Rapid traverse Z 40 m/min Rapid traverse Y 40 m/min Rapid feed rate B 44.4 m/min Rapid traverse W 30 m/min Travel X 535 mm 535 mm (+485 mm / -50 mm) Travel Z 900 mm Travel Y 210 mm B-axis travel range 240° (-30° ~ +210°) Travel W 900 mm 0850U INTEGREX I-100H S 850U MR406 Milling spindle 20,000 rpm SI098 Sub-spindle synchronization AS080 Overload detection system CS503 Through-spindle coolant 15 bar / flushing CS664 Preparation for extraction unit (Gx500) MB255 B-axis measuring probe (RMP60) MB650 Calibration sphere + magnetic base MB624 Smooth Set And Inspect (Multi-Tasking) CV041 Side chip conveyor (hinged belt) TE810 Preparation for Multi&Flash system NO056 Y-1 MAZAK API NO059 MTConnect adapter NO066 Smooth synchronous tapping (with milling spindle) NO072 Automatic peck drilling cycle with load monitoring NO116 Smooth 5-axis control (EIA/ISO) NO123 Tool radius compensation in 5-axis machining NO134 Simultaneous 5-axis machining on the second spindle NO442 Slope Constant (G00 motion optimization) NO482 Thread re-entry NO599 Cylindrical (G07) and polar (G12) interpolation

Condition: good (used), Year of construction: 2021, MAZAK Integrex i-250H ST SmoothAi, year of manufacture 2021, HALTER loading portal with robot, bar feeder BREUNING-IRCO ILS-MUK, main spindle 8" sub spindle 8", machining diameter 670 mm Bar diameter 65 mm Spindle speed: Hjdexy T Dtjpfx Ah Nsfb Turning: 5,000 rpm Milling: 12,000 rpm Chain magazine: 38 positions, Turret: 12 positions

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, Hsdpfx Astmtktjh Nefb spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: excellent (used), Year of construction: 2005, operating hours: 4,900 h, functionality: fully functional, turning length: 730 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, feed length X-axis: 410 mm, feed length Y-axis: 140 mm, feed length Z-axis: 570 mm, total height: 3,100 mm, total length: 5,180 mm, total width: 2,550 mm, spindle nose: A6, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, 2005 Mazak Integrex 100-III S CNC Mill-Turn Lathe – Fully Equipped with Automation – Low Hours🔹 Make: Mazak Model: Integrex 100-III S Machine Type: CNC Mill-Turn Lathe with Automation Year: 2005 Control: Mazatrol 640MT Pro Production Hours: 4869hrs Condition: Very Good We are pleased to offer this 2005 Mazak Integrex 100-III S, a high-precision CNC mill-turn center built for multi-tasking performance. Fitted with the powerful Mazatrol 640MT Pro control and only 4869 production hours, this machine delivers versatility, speed, and accuracy with minimal wear. Ideal for complex part machining, this machine features main and sub spindles, B-axis milling head, and a GL50F gantry loader for automated part handling, increasing your throughput without sacrificing precision. 🔧 Key Specifications: Max Turning Diameter: 545mm Max Machining Diameter: 350mm Max Turning Length: 730mm Bar Capacity: 52mm Main & Sub Spindle Power: 11kW each Main/Sub Spindle Speed: 6000rpm C-Axis Resolution: 0.001° indexing Milling Spindle: 5.5kW / 12000rpm B Axis Range: 225° Tool Changer: 40 ATC stations Hjdpfx Ajxyy Ixeh Nofb Tool Capacity: 4kg, 200mm length, 90mm diameter Control: Mazatrol 640MT Pro Tool Taper: KM63 🧰 Machine Travels: X1: 410 mm | Y1: 140 mm | Z1: 570 mm X2: 220 mm | Z2: 780 mm W-Axis: 790 mm ⚙️ Included Equipment: GL50F Gantry Loader with infeed/outfeed conveyors Automatic door for improved workflow Selection of tool holders FSE Swarf Conveyor OMF 1000 Filter System FSE Coolant Filtration & Sump Pump Chiller unit for thermal stability 📐 Footprint & Weight: Dimensions (excluding gantry): 2600 x 2200 x 2500mm Weight: 7,600kg 🚀 Why Choose This Mazak Integrex 100-III S? Low hours – only 4869 hours of production Fully automated with gantry loader Clean, well-maintained, and in very good condition High-end specs for multi-process machining Ready to go – excellent choice for job shops or high-mix/low-volume manufacturers *Specifications are given in good faith but not guaranteed* Mazak Integrex 100-III S for sale Used Mazak CNC lathe CNC mill-turn lathe with gantry loader Mazak Integrex Irish dealer Mazak 100-III S specifications CNC turning center with automation Used CNC lathe 2005 Mazak Mazatrol 640MT Pro machine CNC lathe with sub spindle Mill-turn lathe with B-axis

Condition: excellent (used), Year of construction: 2005, operating hours: 5,600 h, machine/vehicle number: 181174, 5 axis simultaneously and 5 axis free form - CAP Tool system! Accumulated time: Power on: 2026:04'40" Auto open: 1323:07'43" Auto cut: 669:16'50" Total cut: 5606:49'54" Hfodpfxed H Erye Ah Njb Total time: 2028:04'40" Bought new from Mazak factory. Excellent and working condition. Comes with different machining tools. You're welcome to test and see the machine. Year of manufacture: 10-2005 - Max. Schwingdurchmesser …………….…… Ø660 mm - Max.Bearbeitungsdurchmesser ( oberer / unterer revolver ) ………..Ø660 mm / Ø270 mm - Max. Bearbeitungslange ……………....…1016 mm - X – Achsen Verfahrweg ( oberer revolver ) ……………...………….580 mm - X2 – Achsen Verfahrweg ( unterer revolver ) …………….150 mm - Z – Achsen Verfahrweg ( oberer revolver ) …………….....…..1045 mm - Z2 – Achsen Verfahrweg ( unterer revolver ) …………….….990 mm - B – Achsen Verfahrweg ………….…………….….225° - C – Achsen Verfahrweg ………….…………….360° - Spannfuttergrose ……………... 8 “ - Hauptspindeldrehzahl ……………..….5000 o / min - Hauptspindelbohrung ……………...……………. Ø51 mm - Min. Hauptspindelindexierung ……………..………… 0.0001 ° - Spannfuttergrose 2. spindel ……………..………….. 8 “ - Drehzahl der 2. spindel …………….…5000 o / min - Verfahrweg des 2. spindelstocks ( W – Achsen ) ……………..…….. 1050 mm - Eilganggeschwindigkeit des 2. spindelstocks ( W – Achsen ) …….. 30000 mm / min - Min. Indexierung der 2. spindel …………… 0.001 ° - Revolvertyp ( oberer )…………… mit ATC - Werkzeugschafthohe ( oberer )……………..….. 25 mm - Bohrstangenschaftdurchmesser ……………..….. Ø40 mm - Revolvertyp ( unterer )…………….…… trommelrevolver mit 9 stationen - Werkzeuganzahl …………….….. 9 Werkzeuge - Werkzeugschafthohe ( unterer )…………….…….. 25 mm - Bohrstangenschaftdurchmesser …………….... Ø32 mm - Revolverschaltzeit ( unterer )……………. 0.14 s / 1 schaltschritt - Frasspindeldrehzahl …………….. 12000 o / min - Bearbeitungskapazitat der frasspindel ……………. Frasen : Ø100 mm , schaftfrasen : Ø32 mm , Bohren : Ø30 mm , Gewindebohren : M27 -: X – Achsen ( oberer ) …………… 38000 mm / min : X 2– Achsen ( unterer ) ………….…… 38000 mm / min - : Y – Achsen …………… 26000 mm / min -: Z – Achsen ( oberer ) …………….… 38000 mm / min -: Z2 – Achsen ( unterer ) ……………..… 38000 mm / min - Eilganggeschwindigkeit : C – Achsen …………….… 400 o / min - Tippvorschubgeschwindigkeit : X – Achsen ( oberer ) ……….…… 2000 mm / min - Tippvorschubgeschwindigkeit : X2 – Achsen ( unterer ) ………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Y – Achsen ( oberer ) ………….… 2000 mm / min - Tippvorschubgeschwindigkeit : Z – Achsen ( oberer ) …………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Z2 – Achsen ( oberer ) …………… 2000 mm / min - Tippvorschubgeschwindigkeit : C – Achsen …………….… 2000 ° / min - Werkzeugschaft / Werkzeugaufnahmekapazitat …………….. CAPTO C6 No 20 Werkzeuge - Max. Werkzeugdurchmesser …………….. Ø90 mm (Ø125 mm bei freien Nebenplatzen ) 300 mm / 10 kg - Werkzeugwechselzeit ( werkzeug-zu-werkzeug ) …………….. 1.3 s - Hauptspindelmotor ( 30 min -/Dauerbetrieb ) ……………..AC 22 kW / AC 15 kW - Motor der 2. spindel ( 30 min -/Dauerbetrieb ) ……………....AC 18.5 kW / AC 15 kW - Frasspindelmotor ( 20 % ED ) ……………. AC 15 kW - Kuhlmittelpumpenmotor ……………1.2 kW - Leistungsaufnahme (Dauerbetrieb ) …………….….. 66.0 kVA - Druckluftanschluss ……………..…..5 bar , 500 l / min - Kuhlmittel frassungsvermogen des Tanks ……………..….. 300 l - Maschinenhohe ……………..……..2597 mm - Aufstel

Condition: ready for operation (used), Year of construction: 2012, Main Drive Number of axis 5 This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information. Hjdex D I Rpepfx Ah Nsfb Application Types Turning

Condition: used, MAZAK Integrex 100 III ST CNC: MAZATROL 640 MT PRO Swing over Cross Slide: 545 mm Maximum Machining Diameter (Milling Head): 545 mm Maximum Machining Diameter (Lower Turret): 400 mm Maximum Machining Length: 753 mm Hsdpfxjxl Eq Ae Ah Nsfb X-Axis Travel: 410 mm Z-Axis Travel: 805 mm Y-Axis Travel: 140 mm X2-Axis Travel: 220 mm Z2-Axis Travel: 780 mm W-Axis Travel: 795 mm Rapid Traverse (X/Z-Axis): 30/33 m/min Rapid Traverse (X2/Z2-Axis): 30/33 m/min Rapid Traverse (Y-Axis): 26 m/min Rapid Traverse (W-Axis): 30 m/min Main Spindle Bore Diameter: 51 mm Sub Spindle Bore Diameter: 51 mm Main Spindle Speed Range: 35 – 6,000 rpm Sub Spindle Speed Range: 35 – 6,000 rpm Main Spindle Motor Power: 11 kW Sub Spindle Motor Power: 11 kW Main Spindle Maximum Torque: 16.4 kgf·m Sub Spindle Maximum Torque: 16.4 kgf·m Tool Magazine: 40 tools, KM63 Milling Spindle Speed: 15–12,000 rpm Lower Turret Stations: 8 C-Axis on Main Spindle C-Axis on Sub Spindle C-Axis Indexing: 0.001 degrees Driven Tools Main Spindle Chuck: KITAGAWA B-206, Ø170 mm Sub Spindle Chuck: KITAGAWA B-206, Ø170 mm Tool Presetter Chip Conveyor Machine Weight: 7,600 kg

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Hedpjxp Hmasfx Ah Nofb Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: good (used), Year of construction: 1998, Mazak Integrex 35 turning/milling center, year of manufacture 1998, Mazak T Plus control, turning length 1500 mm, max. turning diameter 575 mm, Y axis, B axis infinitely swiveling, 40-position chain magazine, turning tool holder KM 63, milling tool holder SK 40, tailstock, steady rest, chip conveyor, Kitagawa three-jaw chuck B 12. Hfodpfx Ahsxm Trde Nob

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Hsdpfjxd Ay Ejx Ah Njfb Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2020, operating hours: 8,052 h, functionality: fully functional, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,345 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,875 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,345 mm, feed rate X-axis: 24,000 m/min, feed rate Y-axis: 24,000 m/min, feed rate Z-axis: 24,000 m/min, torque: 3,430 Nm, workpiece weight (max.): 4,000 kg, total height: 4,950 mm, total length: 7,029 mm, total width: 5,200 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 51,200 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 500 rpm, distance table center to spindle nose: 1,600 mm, spindle motor power: 37,000 W, spindle nose: A2-11, tool length: 300 mm, type of input current: AC, turning diameter: 1,450 mm, turning diameter over cross slide: 1,250 mm, spindle diameter: 160 mm, bar passage: 160 mm, chuck outer diameter: 500 mm, collet bore: 160 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 25,000 N, milling spindle length: 300 mm, quill diameter: 160 mm, quill stroke: 250 mm, quill travel distance: 250 mm, spindle bore: 160 mm, swing diameter over bed slide: 1,450 mm, swing diameter over cross slide: 1,250 mm, swing diameter over top slide: 1,100 mm, turning diameter over bed slide: 1,300 mm, turning length: 1,600 mm, Equipment: chip conveyor, documentation/manual, For sale: Mazak Integrex e-1250 V/8 mill-turn center complete with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for complex workpieces in a single setup. _____ Technical Specifications – Integrex e-1250 V/8 • Travel: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 positions (CAPTO) • Control: Mazak SmoothX with 5-axis functionality • Operations: Milling, turning, drilling, tapping, 5-axis simultaneous machining • Coolant system: High-pressure system up to 70 bar, Mayfran belt filter system, oil separator, coolant guns • Accessories: Tool Eye, Renishaw touch probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-cutting functions • Cylindrical & polar interpolation (EIA) • Tool length & radius compensation (5-axis) Hedjxgu E Eopfx Ah Njfb • Fine spline interpolation (EIA) • Mazatrol turning/milling function • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay racking solution for flexible manufacturing • Ideal for both series and mixed production • Note: Pallets to be procured separately _____ Special Features • Complete documentation (digital & print) • Full package: machine + automation + accessories _____ Your Advantage • “Done in One®” concept: all machining in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: From single parts to series production • Efficiency: Automatic pallet change & integrated measurement technology 📍 Location: Southern Germany 👉 Price and delivery terms upon request

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 7500 kg Control Unit Brand MAZATROL Model Fusion 640MT Main Drive Number of spindles 2 Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 530 mm Y-Axis Movement 140 mm Z-Axis Movement 1065 mm Tools Type of tool holder KM-63 Media Chip conveyor Yes This 5-axis Mazak INTEGREX 200 SY was manufactured in 2001. A robust turn-mill centre featuring dual spindles and a MAZATROL FUSION 640MT control unit, it offers a spindle speed of 5000 1/MIN and movements of X-530 mm, Y-140 mm, Z-1065 mm. Consider the opportunity to buy this Mazak INTEGREX 200 SY turn-mill centre. Contact us for more information about this machine. Hfsdpsx D Dphsfx Ah Njb Application Types Turning

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Hfsdpfx Aoxf Iklsh Njb