Used Max Simmel for sale (34,455)

Condition: new, maximum load weight: 96,590 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable as well as detachable. Length approx. 3,650 mm * 2 pairs of folding lashing rings to the outside (LC 5,000 daN) Pgsdpsxn E Iyefx Adnow * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * For tractor unit: 6x4 or 8x4 2-axle front bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm * Chassis width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle double telescopic loading platform with pin-eye coupling at the front and chamfering approx. 500 mm x 8° at the rear, length approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum axle 2-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24x brand of our choice (M+S) 245/70 R17.5 load index 143/141L (146/146F) Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final paintwork with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red * Rear section metallised and painted RAL 9010 (Pure White) Options included: * Truck hydraulic connection with flow controller (20 l/min), including support arm for supply lines, tractor unit tank must be at least 80 L * with MAX Trailer coupling pieces, otherwise coupling pieces to be supplied free ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Removable ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodised finish * Socket for remote steering operation on the gooseneck with cable remote control and push buttons including single-wheel tracking alignment (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Illuminated gooseneck control area with on/off switch * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed with screw couplings * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 * Stake pocket strips mounted transversely in the load floor for plug-in stakes approx. 100 x 50 mm * Chassis surface finished with sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform finished with

Condition: used, power: 368 kW (500.34 HP), fuel type: diesel, color: white, axle configuration: 2 axles, empty load weight: 19,000 kg, gearing type: automatic, emission class: euro6, Year of construction: 2025, NEGOTIATION RESERVED. The price does not include VAT, registration tax, and MSS. VEHICLE OPTIONS: - 4-bag rear air suspension Pgjdpfx Aeq Rwydjdnow - XSS-470 rear differential - Fifth wheel height 1,100 mm – 315/70R 22.5 Continental - ZF Intarder - Comfort Plus Pack - Side skirts Offer valid for contracts and/or registrations completed by 31/12/2025, subject to approval. - We accept trade-ins of any vehicle, subject to appraisal. - Financing or Leasing options available for any amount, tailored to the customer’s needs. We are EXPERTS in long-distance transactions and will offer you the best solution to purchase our vehicles, even if you live far from the Province of Bergamo. Please verify the features of the listed vehicle. Lodotruck s.r.l. declines all responsibility for any accidental discrepancies with respect to the description in this advertisement. If you are interested in the vehicle, please reply to the ad specifying your city and phone number. If proposing a trade-in, please specify: make, model, color, month and year of registration, mileage, main accessories, transmission, kW/HP, and overall condition of the vehicle (preferably with attached photos). With this information, we will be able to respond more quickly. Contact us at

Condition: like new (used), Year of construction: 2008, amount 1 STK Pgjdpfoxgv Dvox Adnsw

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 4,000 W, power: 4 kW (5.44 HP), warranty duration: 12 months, Equipment: documentation/manual, TRADE FAIR MACHINE AT A SPECIAL PRICE!!! SF 1530G 4KW Max 5G laser source with Precitec head. Also enables cutting of aluminium! This compact machine with a side pull-out table is space-saving, while still capable of processing large-format sheets. Cutting area: 1500x3000 mm. Also ideal for your business! Cutting up to 18 mm (mild steel S235) possible!! Pedpfx Ajqwzuxednegw

Condition: new, Year of construction: 2025, functionality: fully functional, General Description: Specifically designed for grinding soft to medium-hard plastics. Fixed discharge pipe on the grinding bin. Outlet pipe with adjustable airflow and slanted cut. Automatic self-tensioning belt drive system (maintenance-free). Technical Specifications: Sound-insulated stainless steel hopper. Hopper prepared for magnet installation. Grinding chamber: 247 x 284 mm. Number of blades: 3 rotating – 2 fixed. Rotor diameter: 180 mm. Rotor design: Open. Rotor speed: 200 rpm / 50 Hz. Re-sharpenable blades. Screen hole size: 5 mm. Drive motor: 3 kW. Large flywheel providing additional cutting inertia for thick-walled parts. Throughput capacity: 35 kg/h (depending on material, part geometry, grinder size, etc.). Stainless steel collection bin (13 liters), suitable for manual or vacuum discharge. Notes: Stock Availability – granulators equipped with additional options: with magnet on hopper with antistatic capacitive sensor with discharge pipe Pgjdpfx Ajxgn Ugsdnsw

Condition: new, functionality: fully functional, empty load weight: 130 kg, lifting power: 1,000 kg/m, Year of construction: 2025, machine/vehicle number: 550, Vacuum Lifter Panel System DS 550 MAX - Radio Remote Control Configuration can be customized to individual requirements SPECIFICATION: • 6 arms, each 1 m long • 6 cross arms with adjustable suction cup mounting • 12 side suction cups • Wall adapter • Control unit with charging function • Control unit with radio remote control • Radio remote control handset • 2 safety belts • Maximum lifting capacity: 1000 kg FEATURES: • Compatible with all cranes and HDS systems • Suitable for various working conditions • Suction cups can be configured independently without tools • Power supply: 12V battery (up to 12 h of operation) • Battery charge indicator • Vacuum gauge • Vacuum reservoir Pgedexnanzjpfx Adnow • Max lifting capacity 1000 kg • Device weight approx. 130 kg • Suction cups 500mm x 100mm with REPLACEABLE SEAL

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: PWFJ-2018-001-006, Weight: 5000 kg Power: 32 kW Air pressure: 6 BAR Dimensions (LxHxW): Approx. 18,000 x 2000 x 1600 mm Mill diameter: 125 mm Saw blade diameter: 450 mm Extraction port diameter: 1x200/2x120 mm/1x80 mm Air extraction speed: 30 m/sec Pressing force: Adjustable up to max. 14,000 kg Lengths: 450 – 6000+ mm Pedpjxm U Erefx Adnogw Widths: 50 – 300 mm Thicknesses: 8 – 50 mm Capacity: Up to 8 joints/min Length modes: Variable / Fixed / Optimizing round lengths

Year of construction: 2024, condition: used, New: Yes Pjdpfx Asu Hwbdednogw Empty weight: 180 kg CE mark: yes Serial number: DPX-27510 Transport dimensions (LxWxH): 1,9x0,8x0,8 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Pgodpfx Adst U Agmenow Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: used, mileage: 159,800 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,000 kg, first registration: 09/2016, next inspection (TÜV): 11/2025, loading space length: 3,450 mm, loading space width: 1,880 mm, loading space height: 1,510 mm, loading space volume: 10 m³, emission class: euro6, color: white, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, No. 57 - You will find this and many other inspected Mercedes Benz vans on our homepage: ----Mercedes-Benz Sprinter 516 CDI, EURO 6, Frigopan refrigerated box with Thermo King V300 Max cooling unit. Temperature range -22°C / +20°C. Very robust vehicle with a high payload of 2,150 kg. Drive and stationary cooling are available. The vehicle is in good visual and technical condition. HU/AU (TÜV) valid until 11/2025. Permissible total weight: 5 t, Unladen weight: 2,850 kg, Payload: 2,150 kg.----The refrigeration is running but does not cool down to the set temperature. Presumably, there is too little refrigerant in the system. Cause unknown.----The box stands out for its sturdy and practical construction (reinforced front wall, rear doors, side doors right and left, aluminum floor with collision protection). ----The vehicle is from the first owner, has a complete service history, and is in good visual and technical condition. The service was carried out at KM 47, 104, 134, 151.----Permissible total weight: 5 t Unladen weight: 2,850 kg Podpfxowtcfpo Adnegw Payload: 2,150 kg Cargo area LxWxH in cm: 345 x 188 x 151 Emission class: EURO 5 Long wheelbase: 3665 mm VIN: WDB9061531N663635 All-weather tires 2 keys ----* Mercedes-Benz Sprinter 516 CDI in good condition * Deep-freeze box * Frigopan refrigerated box * Thermo King V300 Max cooling unit, deep freezing down to -22°C * Temperature recorder * Drive and stationary cooling * Tachograph * Cruise control * Lane keeping assistant * Becker Map Pilot navigation system * Reinforced stabilizer at front, reinforced front axle * 3 seats * Audio system Audio 15 * Electric windows * Electrically adjustable exterior mirrors * Airbag * Central locking ----Errors, modifications, and prior sale reserved. Special Equipment: 1 DIN slot at the front under the headlining, Audio system Audio 15 (radio with color display), exhaust before rear axle left, outside temperature display, single-pole battery disconnect switch, roof control unit with reading light on driver/passenger side, digital tachograph, downloadable, 180 A generator, folding lid for storage compartment, fuel filter with water separator, front PTO with bracket for additional coolant compressor, Becker MAP Pilot navigation system, spare wheel Super-Single tires (235/65 R16), spare wheel holder under the end of the frame including jack, front mud flaps, seats in cab: passenger double seat, seats in cab: driver's comfort seat, reinforced front stabilizer, rear wall lining, fleece battery 95 Ah, heat protection glazing (windscreen with top band filter) Additional Equipment: Adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, both, exterior mirrors with integrated indicator, battery 74 Ah, brake assist, braking system with ABS+ASR, roof lining in cab, driving assistance system: lane keeping assistant, lockable glove compartment, body/construction: platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model update, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker package, tires 285/65 R16C super-single tires on rear axle, low emissions according to Euro 6 emission standard, seat belt system with warning device (driver's side), seat cover/upholstery: fabric Lima, seats in cab: adjustable passenger seat, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle

Condition: used, mileage: 197,619 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 02/2014, next inspection (TÜV): 02/2026, loading space length: 2,550 mm, loading space width: 1,850 mm, loading space height: 1,900 mm, emission class: euro5, color: white, number of seats: 3, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Body: Kiesling "Cooler Flitzer" refrigerated box, * Internal dimensions: 2,550 mm x 1,850 mm x 1,900 mm. * Thermo King V 300 Max refrigeration unit, * Standby cooling, * Temperature recorder, * Side doors on left and right, Equipment: * Air conditioning, * Twin passenger seat, * Rear wall cladding, * Heat-insulating glazing, * Audio system Audio 10, * Bluetools hands-free system, * External temperature display, * Electrically adjustable and heated exterior mirrors, both sides, Safety / Environment: * Driver and passenger airbags, * Head airbag system (windowbag), * Head-shoulder airbag (thoraxbag) for driver, * Brake assist, * ABS+ASR braking system, * Reinforced rear stabilizer, reinforced front stabilizer, * Low-emission, compliant with Euro 5 emissions standard, Other information: * German first delivery, * Truck registration, * Engine: 2.1 litre – 120 kW CDI catalytic converter, * Wheelbase 3,250 mm, Podpfx Ajvlg T Nsdnegw * Payload 1,100 kg as per registration certificate, * Permissible total weight 3.50 t, * Retrofitting of a tow hitch possible at extra cost Since 1971, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always offers around 200 vehicles in stock including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with favorable special conditions. If interested, we will gladly provide you with a customized offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we are happy to present you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features may need to be verified separately. Errors and prior sale reserved.

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Landing gear: * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area Pjdpfsxl Nf Dex Adnegw * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Condition: used, Year of construction: 2004, power: 1.1 kW (1.50 HP), TECHNICAL SPECIFICATIONS - Type : HYGINOX SH-26 C - Year : 2004 - Max flow : 30 m3/h - 316L stainless steel for parts in contact with the product Pgjdpjv Ukx Usfx Adnjw - 1,1 Kw - 1500 rpm - Connection: 2"1/2 - 2’ - SH-26 C: take 90 for dimension E from table in documentation - Reference : 007132

Condition: good (used), Year of construction: 2009, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 24 mm, clearance between the columns: 520 mm, injection pressure: 1,950 bar, injection weight: 220 g, mold height (min.): 250 mm, ejector force: 37 N, plate length: 760 mm, plate width: 775 mm, total length: 5,400 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 7,200 kg, power: 27 kW (36.71 HP), Equipment: documentation/manual, - E12 - Euromap 67 - Flowmeters and plate piping - Air Valves: 2 + 2 - Screw diameter: 40 mm - Clamping force: 1,800 kN - Max. shot weight: 155 g - Injection rate: 224 cm³/s - Injection pressure: 1,950 bar - Injection volume: 220 cm³ - Screw speed: 420 rpm - Screw L/D ratio: 24 - Max. nozzle stroke/force: 305 / 28 mm / kN - Max. mould opening stroke: 1,060 mm - Max. mould height: 600 mm - Min. mould height: 250 mm - Max. daylight between platens: 1,060 mm - Heating zones: 4 - Platen size (h x v): 760 x 775 mm - Distance between tie-bars (h x v): 520 x 520 mm - Ejector force: 37 kN Pgsdpsxlf R Nefx Adnew - Control: CC200 - Operating hours: 80,000 - Power: installed max.: 27 + 9.2 + 4 kW - Weight: 7,200 kg - Dimensions (L x W x H): 5,400 x 1,400 x 2,000 mm

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing Pgedpoubamvofx Adnjw On request - installment plan option Price: On request

Condition: excellent (used), Fitting drilling machine Blue Max mini Max operating pressure 6 bar/100 PSI Hettich system Pedpfx Adoizwwqjnjgw Pneumatic material clamp Pneumatic drill feed with linear stop

Year of construction: 1999, condition: excellent (used), - 0.8 kW engine Pgsdpfx Asidmu Rodnsw - 400 V power supply - 3 spindles - drilling depth adjustment - pneumatic spindle stroke - integrated blowing on the drilling site - two pneumatic clamps

Year of construction: 2025, condition: new, machine/vehicle number: 405899413, MARINI USM 600 MAX MOBILE COLD AND SOIL MIXING PLANT Year of manufacture: 2020 Condition: New Pgedpjhd I R Nofx Adnew - Production capacity: up to 600 t/h - Cement: up to 10% - Water: up to 10% - additives: 5% - batchers: 4 - vibrators: 2 - can width: 3,2 m - Capacity: 10 m³ - Weighing system: individual load cell per batcher - Mixer type: continuous mixer - Outlet opening: with electric / hydraulic drive - Control: automatic and manual Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plant on our website Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: good (used), functionality: fully functional, -KOM 3025- On offer here is a fully functional ABUS gantry crane. Attention: Special feature: Operation on the crane hook. Technical data: maximum load: 160 kg Length of the rail: approx. 13,800 mm Pedpfx Aju Hzaqodnegw Width of the rail: approx. 2,800 mm

Condition: new, maximum load weight: 37,680 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the equipment features. Complete specification available on request. Gooseneck * With approximately 30 mm thick hardwood flooring. Gooseneck with straight rear section * 3 pairs of lashing rings (LC 5,000 daN) Loading Area * Extendable design * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, treadplate covering above the axles Landing Gear * JOST mechanical landing gear with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single colour RAL 3002 carmine red * Rims in silver Podpfx Asv Etx Ejdnjgw Accessories Included * 2" king pin * Galvanised steel front wall, approx. 400 mm high * Yellow-red air couplings on galvanised front connection strip * 4 chocks with holder on the front wall * Spare wheel holder in front of the front wall * Electro-hydraulic unit * Steering from the front and rear via cable remote control with push buttons, including single-track control of the axles (without installation in the tractor unit) * European reflective signs (red-yellow) at the rear of the trailer * Yellow reflective tape according to EU regulations on sides, extensions, and rear of the trailer * Bracket for warning signs including socket, left and right on the gooseneck and rear plate * Bracket for rotating beacon at the rear of the trailer * Galvanised foldable support legs under the loading area's chamfer * Load gauge for determining axle loads including load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the loading area, 1x 40' container over the gooseneck, or 2x 20' containers * Support block with 1 pair of WADER container pockets, fifth wheel load approx. 20,000 kg * 7 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the loading area * Galvanised, extendable width extensions, approx. 230 mm per side * Sliding hook-in rails for aluminium loading ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the loading area (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic reversing warning signal * HRM Metallisation (High Resistance Metallisation)

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 Pgjdpsra Nyuofx Adnew We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: used, mileage: 335,400 km, power: 368 kW (500.34 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 2 axles, color: blue, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), parking heater, soot filter, Comfort Plus cab with the following standard features: Roof and side spoilers, sun visor, auxiliary heating, two exterior storage compartments, electrically adjustable and heated mirrors, interior curtains, leather-wrapped steering wheel with ergonomically adjustable steering column, steering wheel controls for the multimedia screen, radio, and other functions, 8" color instrument cluster, 7.2" LCD touchscreen multimedia screen with wireless and USB connection, optional navigation function, hands-free mode, Apple CarPlay compatibility, Bluetooth function, on-board computer with driving data, axle load display, driving analysis program, Connect Truck System (Internet), 12V 20A and 24V 15A power outlets in the dashboard, maintenance indicator, auxiliary heating control, ergonomic seats with lumbar support with 260 mm adjustment range, automatic air conditioning, cold weather package (heatable windshield, auxiliary heating), 225 AH batteries, 225 L fiberglass storage compartment in the front, 105 L rear storage compartment, 38 L refrigerator, two storage compartments under the sleeping berth, foldable upper sleeping berth with safety net, sleeping berth as a box spring bed or lower bed, control unit operated from the bed, electric windows operated via door opener, cab with 4-point air suspension, 12 V 20 A socket/sleeping berth, compressed air connection on the driver's seat, two-stage seat heating, Driver assistance and safety systems: ASR traction control, ESP stability program, hill start assist, Lane keeping assist, emergency braking assist, adaptive cruise control + ACC, speed limiter, Max Cruise and GPS cruise control system, differential lock, Wabco (Knott) brake system and components, Powertrain: Ecotorq engine with 500 HP 2,500 Nm torque, engine brake approx. 400 kW ZF Traxxon 12+2 transmission, automated version, rear axle (Rockwell) ECAS air suspension, rear axle i=2:47:1 (ww. 2.64:1), Pgjdowdc Npspfx Adnjw Chassis tires SAF fifth wheel coupling 150 mm/12 mm MP, fifth wheel height approx. 1,150 mm Tires: 6-ply 315/70 R 22.5 on silver steel rims 9.00 x 22.5" Unirad bolts, tank equipment: 600 L main tank (450 L option on the left), SCR tank 78 L, left side subject to availability Electrical system/components: LED daytime running lights, rear work lights, fog and rear fog lights, automatic headlights, rain sensor, electric cab coupling Work lights behind the cab Battery master switch Side paneling ZF Intarder Black vehicle grille 7.1 ton front axle Wheelbase 3,600 mm Combined hydraulics for trailer and tipping operation Parking air conditioning ZF NH4c/NH1c PTO Offer and images subject to change

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: Pjdpfjxabntex Adnsgw - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, Year of construction: 2025, machine/vehicle number: 332050066, Marini Carbon T-Box 160 mobile asphalt plant year: New capacity: up to 160 to./h. - container type - aggregate hoppers: 4 - capacity of one hopper: 10 m3 - drying drum: counterflow - burner: 13 MW - 1 year guarantee - CE This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Pgjdpfx Aehd I Upednsw Use: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), Somex max 2 drilling unit Pedpfsd Huvyox Adnjgw Manufacturer: Somex Model: Max 2 Spindle carrier: place sleeve ø 12 mm kW: 0.37 V: 380-420V / 220-240 V A: 1.1 / 1.9 Rpm: 2820 Hz: 50 There are a total of 3 pieces. The above price is per piece.