Used Martin T 60 for sale (96)

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Iedpfx Aoh U A Evjbnoif Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Iodpfxoyync To Abnjif Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: used, Year of construction: 2001, saw blade diameter min. 200 / max. 500 mm Speed 2800 / 4000 / 5500 U/min. Iijdpfx Aezczf Eebnof

Condition: used, Year of construction: 1980, Martin Spindle Moulder Iiedpoy Rzytsfx Abnsf Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Ijdpfsvwfiaox Abnoif

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Iijdpfx Abeyymtdjnof Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives - Central lubrication - Star-delta switch Iedpfx Abjyt Nx Ujnsif

Condition: used, Year of construction: 1980, machine/vehicle number: V 109331, functionality: unexamined, power: 4.8 kW (6.53 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 500 mm, tool diameter: 125 mm, number of blades: 2, actuation type: hydraulic, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total length of planing tables: 2,500 mm, overall weight: 950 kg, Martin surface planer T 51, planing width 500 mm, 2-knife strip cutterblock, infeed table length 1,400 mm, outfeed table length 1,100 mm, straight edge, auxiliary fence, adjustable fence from 0 – 45°, weight approx. 950 kg, sold as inspected, not overhauled, ex location Seevetal, subject to prior sale. Iiedpfxoy E Rv Ts Abnjf

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Tailstock taper: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Iiodpfx Abjvzn E Ssnof Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. - The pneumatic clamping of the parallel fence does not clamp. Carriage length: 3,300 mm Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Iisdpjy A I Nrjfx Abnef Saw blade diameter: max. 500 mm Power: 5.5 kW Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Motor brake: Yes

Condition: like new (used), functionality: fully functional, THCIKNESS PLANER model MARTIN T 44 second hand machine CE mark : Yes working conditions : Excellent Iiodpfx Aboyml E Denof technical details : useful working width mm. 630 maximum working height mm. 250 maximum removal mm. 8 n.2 feed speed mt./min. 6 / 12 motorized table positioning with digital reading n.4 knives "Tersa" main motor power Hp 7,5 net weight kg. 1115 volt. 380/50

Condition: refurbished (used), Year of construction: 1994, working width: 240 mm, planing height: 160 mm, planing width: 240 mm, working height: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 111 A, We are offering this fully overhauled OTTO MARTIN T 90 planing and profiling machine, year of manufacture 1994. Model: T 90 Serial number: V 215410 Year: 1994 Working width: 240 mm Working height: 160 mm Speed: 6000 rpm Voltage: 400 V Frequency: 50 Hz Number of phases: 3 ~ Iodoyq D Ifopfx Abnjif Rated current: 111 A Operating pressure: 6 bar If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Iisdpotxirfsfx Abnof

Condition: used, Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Iijdpfx Abszrywwonef - Cutting height: ~ 145 mm - Cutting width: ~ 1,300 mm - Cutting length: 3,300 mm - Tilt angle: 45° - Stop: Digital - Adjustment: Electronic - Rip fence: Manual

Condition: used, Year of construction: 2000, Spindle swivels: Yes, -45 to +45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 30 mm, 40 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Dust extraction port: 2 x 120 mm Ijdpfjzdzbzox Abnoif Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, Year of construction: 2001, Working width: 630 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Iijdpfx Ajzq Dcnjbnof Thickness display: digital display Feed rate: 6 / 12 m/min Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: used, Year of construction: 1983, Working width: 510 mm Planing cutterhead: Spiral cutter Number of cutters: 2 Feed table length: 2800 mm Feed table adjustment: hydraulic / foot pedal Adjustment for rabbet and chamfer joints: yes Chip removal display: scale Rabbet and chamfer joint display: scale Adjustable angle of the fence: yes Iijdpezq Dcbefx Abnjf Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Iedpfx Asqlck Nebnoif Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease Iiedpfxsqlckpj Abnef 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts Iisdsv Erkaspfx Abnjf T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change Iiedpfx Ajqlclbjbnef 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2000, Robust pivoting milling machine T 26, pivotable from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Pivot angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the pivot angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be implemented according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Iisdpfxjzbm Tfs Abnof Comfort stop T226 with digital displays for total adjustment and infeed fence separately, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Stop with lifting device, pivotable to the side (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Folding stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron fence, left 500mm, right 500mm with two insert strips. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control unit. Comfort stand with electrically height-adjustable feed support, which can be pivoted to the side for machine maintenance and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Planer MARTIN T51 - used - noise-insulated table lips, fence bar, motor brake ----- Technical data ----- Planing width: 51 mm, Table length: 2,520 mm, Max. cutting depth: 16 mm, Cutterblock diameter: 120 mm, Number of knives: 2 pcs, Fence swivel range: 0-45°, Extraction port: 140 mm, Motor power: 4.8 kW Iiedpexm R Upjfx Abnsf

Condition: used, Slider length: 2500 mm Cutting width at the fence: 1000 mm Cutting width at the rip fence: 2800 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Fence adjustment: manual Iisdpfx Absy S Rq Djnjf Saw blade angle display: scale Cutting height display: - Fence display: scale Rip fence scale: scale Saw blade diameter: max. 400 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction port: 120 mm Machine length: 3000 mm Machine width: 1800 mm Weight: approx. 1300 kg

Condition: used, Year of construction: 1981, Working width: 510 mm Planer shaft: strip knives Number of knives: 2 Surface table length: 2600 mm Surface table adjustment: hydraulic / foot pedal Concave-convex joint adjustment: yes Chip removal display: scale Concave-convex joint display: scale Surface fence angle adjustable: yes Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2600 mm Machine width: 1000 mm Iiodjy Hqdgspfx Abnof Weight: 1050 kg