Used Mandrel Tube Benders for sale (2,852)

Year of construction: 2007, condition: ready for operation (used), A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible. Njdpfx Ahozpywxskelf

Year of construction: 2026, condition: ready for operation (used), A brand new Spontan brush deburring machine, which was used only as a demonstration machine, for tubes and profiles is available. Product length range: 100mm-2000mm, Product diameter range: 8mm-90mm, Brush diameter: 300mm, Wall thickness range: 0.5mm-6mm, Max. workpiece weight: 10kg/m, Min. product length: 2×diameter, Brush wire diameter range: 0.2mm-0.5mm, Brush length: 450mm, Discharge height: 1300mm, Machine dimensions X/Y/Z: approx. 3500mm/1750mm/1700mm. Documentation available. An on-site inspection is possible. Nsdezkvkwjpfx Ahkolf

Condition: ready for operation (used), Year of construction: 2000, Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power. Nlsdpfx Asy Uyd Eohkjf

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Nlodpozqfx Dsfx Ahkof

Year of construction: 1985, condition: ready for operation (used), 2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe. Njdoyk Hclopfx Ahkslf

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Nedpjv T Aqgofx Ahkslf

Condition: used, Stacking rack - Used RA2514 Technical Specifications:: External dimensions at the bottom: 1530 x 1165 mm Dimensions between the tubes: 1300 x 935 mm Height: 300 mm Pole size: 60.3 mm tubes Insertion length: 170 mm Net weight: 33 kg Scope of delivery: includes 4 tubes, lengths between 0.6–1.4 m, longer poles available for an additional charge Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Nedpfx Aezlrq Nohkjlf Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Solar Fence | Solar Frame, used Total length: approx. 3,530 mm Total height: approx. 1,510 mm Modular system: The frame can be individually configured and adapted to the size of your solar modules, and can be extended at any time with additional elements. Consisting of EACH: 04 x A - Shelf upright, used Shelving system: Dexion Type: Speedlock P90 Material color: Sendzimir galvanized Frame profile: 100|25 Profile dimensions: 100x100x2.5 mm Nljdpfxozvlyxo Ahkjf Adjustment grid: 50|50 mm Includes transverse and diagonal bracing, Base plates (182x147x6 mm) The uprights are pre-assembled (bolted truss) 1,510 mm high 610|200 mm deep 08 x Dexion leveling plate, new Type: P90U/PL120STD Material color: Sendzimir galvanized Dimensions: 167 x 182 x 1 mm 08 x Pallet racking crossbars, used Shelving system: Dexion Type: Speedlock P90 Material color: Sendzimir galvanized Box profile: 89 x 50 mm Crossbar type: SLO 089|2 Grapple: 5 HK 1,140 mm clear width 16 x Dexion locking pin, used Type: Speedlock P90 Material color: Sendzimir galvanized 04 x Square tube, new Design: hot-dip galvanized Customs tariff number: 73066192 Steel grade: S 235 / S 275 Cross-section: 50x50x2 mm Weight: 3.25 kg | per meter Length: 950 mm Notch on both sides: 50 mm 08 x Plastic distance sleeves M8, 20x30x8.5 mm, white, new 08 x Steel plate, new Dimensions: 42x50x1.20 mm Material color: Sendzimir galvanized 01 x Screws and fasteners Upon request, you will receive a completely coordinated photovoltaic system from our trading partner Erneuerbare Energien Ostfriesland with the following accessories: Growatt Neo micro-inverter 800 Watt incl. Wifi, incl. 5 m AC connection cable, new Growatt battery Noah 2000 Watt incl. Wifi (stackable up to 8 KW), new Solar module DAS Solar Bifacial Full Black 450 Watt, new Photovoltaic cable 2 x 3 m 6 sq mm red/black incl. MC4 connector, new We will gladly establish contact for you. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 1977, machine/vehicle number: 22247, Offered 23250 Technical data: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg Nljdpfx Ahjv Hzr Nekjf - with - Pipe circular saw - Inside and outside pipe deburring device - Pipe necking device - Without tools

Condition: good (used), machine/vehicle number: 0284, Year of construction: 2010, Offer 22650 Technical Specifications: - Load capacity 2100 t Nlodpfew Rnzvsx Ahkjf - Y span (width) 4.0 m - Y dimension (length) 3.5 m - 3 load hooks at the ends of the Y, each with a capacity of 1000 kg - Forklift entry pockets: W 500 x H 230 mm - Spreader beam dimensions approx.: L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Central spreader beam tube made of square tube 140 mm - Construction height approx. 510 mm - Transport dimensions: L 3.2 x W 2.1 x H 0.55 m - Weight: 600 kg

Condition: like new (used), Zeiss Primovert Nodjzvu Avjpfx Ahkolf 4 objectives — Plan-Achromat 4x/0.10, Plan-Achromat 10x/0.25 Ph1, LD Plan-Achromat 20x/0.30 Ph1, LD Plan-Achromat 40x/0.50 Ph1 — binocular tube with eyepieces, condenser with phase contrast inserts (Ph1/0.3), power supply + power cord, 2 spare halogen lamps (Osram), original multilingual Zeiss operating manual, and complete original packaging.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,204 h, load capacity: 4,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 6,100 kg, empty load weight: 10,100 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔥 COMBILIFT C4000 | 2010 | 7,204 MTH | LPG | Duplex 4,600 mm | Fork Positioner | Condition 5/5 ✅ Fully serviced and inspected 🔧 | New superelastic tyres 🛞 | Optional 4,050 mm spreader bar 🏗 FT LOGISTICS – Quality you can trust 🤝 This COMBILIFT C4000 is ready for immediate work — reliable, powerful and designed for demanding operations. After full technical and visual service, it looks like new ✨ and works without compromise. ⚙️ Specifications: 📅 Year: 2010 ⏱ Hours: 7,204 MTH 🔥 Fuel: LPG Nodpfjzvwkcox Ahkelf 🏋️ Capacity: 4,000 kg 📏 Mast: Duplex 4,600 mm 🔧 Fork positioner 1,360 mm | Forks 1,200 mm 🛞 Tyres: 100% superelastic (Front 200/50-10 | Rear 27x10-12) 🏠 Heated full cab ⚖️ Weight: 6,100 kg | 🎯 Load centre: 600 mm 📐 Dimensions: 2400 x 2400 x 2250 mm | Overall height: 3000 mm ✅ Ideal for narrow aisles, long loads, steel, timber, tubes — indoor and outdoor use 🏭🌍 FT LOGISTICS – Quality we stand behind. Service you can rely on. 🛠️

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 7,500 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1635 Nsdpfx Ahezvxmlekslf Type - Dewatering Screen - Capacity: 80-120 T/H - Size: 1650 x 3500mm - Screen Decks: 1 Deck 0.250 micron Polyurethane Screen - Screen Surface: 5.60 m2 - Screen Power/Spin: 2 x 7.5 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Weight: 7500 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 1999, operating hours: 46,644 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, spindle motor power: 18,000 W, total height: 1,872 mm, total width: 1,910 mm, overall weight: 4,000 kg, controller manufacturer: SIEMENS, product length (max.): 3,000 mm, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 1999. This EMCO EmcoTurn 365 MC features a maximum turning diameter of 310 mm and a turning length of up to 610 mm. It includes a powerful main spindle speed range of up to 5000 rpm and a tool holder with 12 powered stations. If you are looking to get high-quality turning capabilities, consider the EMCO EmcoTurn 365 MC machine we have for sale. Contact us for further details. - Working Hours: 46644 h- Max. turning diameter: 310 mm (overall diameter over bed up to 600 mm)- Max. turning length / workpiece length: 520 mm to 610 mm- Max. bar capacity: 45 mm- Main Spindle Speed Range: up to 4200–5000 rpm- Spindle Nose: A6- Spindle Bore: 65 mm- Voltage / Frequency: 400V~ 3/PE 50/60Hz- Maximum Current (Imax): 59 A- Machine Current (IM): 27 A- Short Circuit Current (IK): 6 kA- Number of Tool Stations: 12 stations (all powered)- Speed of Driven Tools: up to 5000 rpm- Power of Driven Tools: approx. 5 kW- Control Unit: Siemens- Included Accessories / Equipment: Kupa Bar Feeder, Knoll Coolant Tank / Filter System (Type 240 S-1, Year 2015), 2 pcs. Chucks, Reduction Tubes / Sleeves, Manuals Technical Specification Nlodpfx Ahszvptvjkof Counter Spindle Yes Driven Tools Yes Taper Size VDI 30

Condition: new, functionality: fully functional, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? Nsdpfjxwmb Hox Ahkelf As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Nlsdszu Avzopfx Ahksf Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: Nledpfx Ahozmqaxoksf • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.

Condition: new, Year of construction: 2023, Dear customers, For a quick and reliable response to your inquiry, we kindly ask you to contact us preferably via email. Njdpfxokuz Tuo Ahkslf This way, we can directly assign your request to the appropriate contact person, capture all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you further! Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube mount for briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must provide protection against hydraulic oil loss - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Nedpfxjukhltj Ahkjlf Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, number of digital displays: 1, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 3 mm - Roller diameter: 90 mm - Electrically adjustable follower roller - Digital display - Hardened rollers Nljdpfx Aei E Tzqehkef - Option for conical rolling - Rotatable top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars 4-spindle deburring and chamfering machine For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 Nodpfx Ajzwpwqehkelf The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Nlsdszk Npgspfx Ahkef Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Nlodpfevrwt Tex Ahkof Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.

Condition: used, Year of construction: 2018, The machine has been partially reconditioned and tested. Njdjx Tpx Aepfx Ahkelf - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Part height: ~ 3–70 mm - Number of tubes (top): 3 - With bar feed - Bar pitch: 60 mm - Suitable for mercury tubes - Suitable for gallium tubes - Tube power: max. 120 W/cm - Rated power: 56 kW/104 A - Voltage, Hz: 400 / 50 - Control cabinet integrated beneath the machine - Feed rate adjustable: ~ 1.25 – 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air flow rate: 3,600 m³/h - Location: in stock - Volts, Hz: 400 / 50

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Nodpfxog Rguce Ahkolf Effective Round Tube Cutting Diameter: Φ20-230mm Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability