Used Mandrel Tube Bender for sale (2,900)

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Ijdpfx Asupia Nehysih Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,000 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are DB, DBF, DBFR. 1 pc. Ø38mmx2mm 2 pcs. Ø25mmx1,5mm Isdpfx Asvuqmxohysih 3 pcs. Ø16mmx1,5mm 4 pcs. Ø13mmx1,5mm DB series makes bending operation automatically. DBF series makes bending and feeding operation automatically. DBFR series makes bending, rotating and feeding operation automatically.

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping Isdpfx Asivqrbjhysih - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Isdendn Agopfx Ahyjih Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, pressure (max.): 250 bar, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Iijdpfx Aeng Exajhyoh Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 Iijdpfxoz Rn Srj Ahyjh with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Maximum bending radius 200 mm Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, with setpoint/actual value display, automatic angle adjustment and memory function Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Iiodpfxouccw He Ahyoh Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Iedpsz Sm Umofx Ahysih Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Condition: good (used), pipe diameter (max.): 30 mm, input voltage: 380 V, Tube bending machine Brand: Margua Model: CEM-30 Maximum bending capacity: 30 x 1.5 mm Maximum square tube capacity: 25 x 25 x 1.5 mm Maximum center radius: 115 mm Minimum inner radius: 25 mm Motor power: 4 HP (Three-phase 380V) Tube accessories: - Dies for 22mm tube Iedpsz Dti Iefx Ahyjih - Dies for 28mm tube - Dies for 20.5mm tube Drive and control: Electromechanical with angle selector and mechanical stop. Bending system: Die-forming draw bending (with or without mandrel).

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm Iodpfjh S Ti Esx Ahyeih -Weight: 169 kg

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Iedpfx Aevtp Rmshyeih Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: not inspected (used), functionality: unexamined, Year of construction: 1994, machine/vehicle number: 7099, overall weight: 2,000 kg, total length: 5,600 mm, total width: 700 mm, total height: 1,600 mm, TRANSFLURID DB 2060 pipe bending machine - Bending capacity: 20 - 60 mm Iodpfx Aoz Sprcohysih FCA D-35614 Aßlar - loaded onto a truck.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 2,500 mm, power: 14 kW (19.03 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 38x2mm Twin Head Tube Bending Machine Iedpovx D Dxsfx Ahyeih The “Gemini” tube bending machines structures. This type of tube benders bend the tubes with own two bending heads. Gemini has 3 different type which are B, BF, BFR. Ø38mmx2mm BFR series makes bending, rotating and feeding operation automatically.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Iiodpfx Ahjz Ii A Seysh Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators Iiodsy Uhxkjpfx Ahyjh 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, controller manufacturer: ESA, controller model: Touch Panel, pipe diameter (max.): 30 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 4 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9783 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Isdpfx Ajzvfq Dehyeih Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Iodpfstr U Hljx Ahyjih PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Ijdpfx Ahevugv Aeyjih Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm Iedpfx Ahouluhwsyeih

Condition: ready for operation (used), functionality: fully functional, Pipe bending machine from Amga. Includes tools. Iijdpsz Szfhefx Ahyeh

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Iisdpfezzlc Rjx Ahyoh Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, Year of construction: 2026, tube bender R 1 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm Isdpfx Ahofiqntjysih - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm Isdpfx Asvdiduehyoih - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Ijdeqfgy Hspfx Ahysih Europe-wide delivery possible.

Condition: used, Year of construction: 1970, rechts Ausklink / links S fence elektronisch ja /nein Ijdpsztf Ahefx Ahyeih foot pedal mechanisch weight of the machine ca. 1,3 t