Used Magnetic Separator for sale (7,803)

Condition: ready for operation (used), Bakker Magnetics Permanent Magnetic Conveyor Belt Brand: Bakker Magnetics Block : L= 1400 x W=450 x H=300 mm. Length frame A-A = 2000 mm. Iaodpfx Ajx Dn Eaoh Nol Beltwidth: 550 mm. Driving: drum motor 2 kW.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable. Ijdpfx Ajx Dm Rzoh Njal

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Iodpfxexcimij Ah Noal

Condition: used, tank capacity: 1,350 l, GENERAL Design: suspended Remarks: Various technical documents available; the tank was previously suspended by the former operator in a ring with load cells, which was embedded in the floor (one ring per tank is included in the scope of delivery; see photos) Speed: 412 rpm External diameter: 1,250 mm Internal diameter: 1,000 mm Total height: 2,650 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Jacket volume: 80.0 litres Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,460 mm Previous application: Pharmaceutical Iaodpfxsxxicco Ah Nol TANK Max. operating temperature (tank) / °C: 130 °C HEATING/COOLING JACKET Max. permissible operating underpressure (jacket/pipe zone) / bar: 1.0 bar Base heating: Half-pipe coil INSULATION Insulation material: Mineral wool EQUIPMENT Manway/Dome: on top head Outlet: available Outlet (alternative): 50 mm MATERIAL PROPERTIES Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt Agitator arrangement: Bottom-mounted TECHNICAL DATA / DIMENSIONS Top head wall thickness: 4.5 mm

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Thyristor controller: Included Frame: With/Without With Stainless steel wear plate. Iedeu Tkraopfx Ah Nsal

Condition: used, The SEITAL SPX SE05X cream separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key features and information that are commonly associated with cream separators like this model: - Separation Process: Cream separators work on the principle of centrifugal force to separate cream from milk based on their different densities. - Capacity: The SE05X typically features a specific capacity for processing milk per hour, which is essential for both small-scale dairy farms and larger dairy operations. - Material: Most cream separators are made of high-quality stainless steel to ensure hygiene, durability, and easy cleaning. - Efficiency: The design usually maximizes the separation efficiency, allowing for the extraction of cream with a high fat content while minimizing the fat content in the skimmed milk. - Ease of Use: These machines are designed for ease of operation, requiring minimal manual interaction once set up. - Applications: Beyond separating cream from milk, they can also be used for other applications in the dairy industry, including buttermilk separation and processing of other liquids. - Maintenance: Regular cleaning and maintenance are essential to ensure optimal performance and longevity of the machine. Iaodjxzxuaepfx Ah Nol Manufacture: Seital Model: SE05X Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included

Condition: ready for operation (used), Wagner Electro Magnetic Conveyor Belt Iodpfxsx Dflke Ah Noal Brand: Wagner 2 pieces on stock: *1x Length frame A-A = 2500 mm, Beltwidth: 1150 mm Driving: 4 kW gearbox Dim. Block : 1150 x 1150 x 600mm Including rectifier. *1x Length frame A-A = 2600 mm, Beltwidth: 1200 mm Driving: 7 kW gearbox Dim. Block : 1700 x 1150 x 600mm Including rectifier.

Year of construction: 2008, condition: used, machine/vehicle number: 51E361-010-02, IFE Processing Technology Year of manufacture: 2008 For sale: 2 identical screens, each equipped with 2 unbalance motors. Ijdpfoxztbhsx Ah Noal The price is for 1 screen.

Condition: good (used), Internal article no.: 23044 Electro- magnetic plate Iodpfx Aelvrmtoh Noal Manufacturer. Assfalg 600x300x80mm 110V On the plate is a cutout about 55mm wide and 4mm deep

Condition: refurbished (used), Year of construction: 2000, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Machine in excellent condition with low working hours, optional mobile bunkerconveyor (the one on the picture) available for extra. Iajdpfx Ahjvy A Ure Nel New conveyor belt cleaner.

Condition: used, Year of construction: 2020, functionality: unexamined, machine/vehicle number: 1739-596, rotational speed (max.): 4,800 rpm, Equipment: type plate available, Used disc stack separator for fermentation lees separation. Machine mounted on a complete skid with the option to purchase additional spare parts. Motor: 55 kW - 60 Hz. Belt drive. Permissible nominal bowl speed: 4,800 rpm. Minimum throughput: 8 m³/h; maximum throughput: 22 m³/h. Permitted feed product density: 1.16 kg/dm³. Permitted heavy liquid density: 1.1 kg/dm³. Permitted solids density: 1.3 kg/dm³. Maintenance tool set with ring spanner and compression tool included. Iaodpfxsxy R A Te Ah Nsl

Year of construction: 2025, condition: new, functionality: fully functional, Cyclone LZA 800, heavy-duty version, incl. internal wear plate Diameter: 800 mm, total height: 2500 mm Designed for a volumetric flow rate of approx. 5000 m³/h Upper section of cyclone: - Diameter: 800 mm - Height: 800 mm - Material thickness: 3 mm - Internal wear plate: 5 mm (bolted) - Immersion tube Ø350 mm Iasdpfsxyzpwsx Ah Njl - Inlet nozzle Ø250 mm with beaded edge - Bolt-on flange t=6 mm - Coated in RAL 7035 light grey Lower section of cyclone: - Diameter: 800 mm - Height: 1500 mm - Material thickness: 3 mm - Outlet nozzle Ø300 mm with beaded edge - Bolt-on flange t=6 mm - 2 mounting brackets - Coated in RAL 7035 light grey Other cyclone models in both heavy-duty and light-duty designs, as well as accessories such as rotary airlocks, conveying fans, wind sifters, etc., are available on request.

Condition: ready for operation (used), Wagner Permanent Magnetic Conveyor Belt Brand: Wagner Length frame A-A = 2000 mm Beltwidth: 800 mm. Block : 1250 mm x 800 mm x 250 mm Driving : 2,2 kW e-motor. Iedpfx Asw Tr R Hjh Neal

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface. Iasdpfetqfhxex Ah Njl

Condition: new, Year of construction: 2025, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: Isdpfoq Nw Uqjx Ah Neal 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Iodpfsv Aailjx Ah Neal

Condition: used, Dust Cyclone, Dust Separator Overall dimensions: 2350 x 2100 x 5040 mm Cyclone diameter: 2100 mm Inlet side: 870 x 360 mm Iasdpfxext Un He Ah Nel Outlet diameter: 635 mm

Condition: excellent (used), electric magnetic chuck Make: Braillon Model: EPBJ Length: 1500 mm Width: 550 mm Height: 115 mm Ijdpsxtwu Njfx Ah Nsal Weight: 760 kg

Condition: ready for operation (used), Bakker Magnetics Permanent Magnetic Block Neodymium Iajdpfjx A I S Dsx Ah Njl Brand: Bakker Magnetics Dim. Block : length 1150 mm,  width 180 mm, height 80 mm.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 1698 250, Milk skimming separator, capacity: 30.000 liter per hour. Iajdpfxexxyc Te Ah Nol Including all tools for maintenance.

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover Iaedeuhzvlepfx Ah Njl L: 900mm W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Discs can be adjusted

Condition: used, Dust Cyclone, Dust Separator, Used machine Overall dimensions: 1200 x 1150 x 3270 mm Iaedpfx Ahoxt Tw He Nsl Inlet side: 280 mm Outlet side: 250 mm Cylinder shell height: 800 mm

Condition: excellent (used), Permanent magnetic chuck Iaedpfx Aextmthoh Nsl Magnetic plate Dimensions: 200 x 500 x 75 mm Weight: 60 kg (28673)

Condition: ready for operation (used), Steinert Electro Magnetic Block Brand: Steinert Iajdpfx Ahjx Aw T Ds Nel Dim. Block : L= 800 x W=550 x H=400 mm. Including rectifier

Condition: ready for operation (used), WOKO Electro Magnetic Conveyor Belt Brand: WOKO Length frame A-A = 2600 mm Beltwidth: 1400 mm Driving: 4 kW e-motor. Ijdpfx Ahexdvw Dj Njal Dim. block : 2100 x 1400 x 430 mm Including rectifier.