Used Magnetic Chuck for sale (5,946)

Condition: used, diameter 200-400 mm different adapting flanges available. Price per pc. Bsdju Sbgbspfx Ab Tedk

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. Bdodpfxjtqfhxs Ab Tjk The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Bjdpfswz Rifex Ab Todk Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, diameter 200 mm height 150 mm hollow 55 mm weight of the machine ca. 30 Kg dimensions 0,2 x 0,2 x 0,2 m 3-jaw chuck with 1 sets of drill jaws Bdsdpfexwzd Aex Ab Tsk Short taper mount size 6 (131,4mm bolt circle) Bayonet lock Chuck wrench

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Bsdpoqlgvhofx Ab Tedk -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Condition: ready for operation (used), Krupp Electro Magnetic Conveyor Belt, Heavy Duty Block : L= 1650 x W=1200 x H=600 mm Power Block = 7,7 kW Power Drummotor = 5,5 kW Beltwidth: 1400 mm, A-A = 3200 mm Bdsdpoxnnddofx Ab Tsk Speed = 2,5 m/sec. Including rectifier (new) Weight appr. 7500 kg On stock 1 piece.  

Condition: new, Year of construction: 2017, Kitakawa orginal 5 inch 3 jaw Large hole power chuck Bodpfx Abem E Imze Tjdk A2-8 direct spindle connection condition new, never use. in stock include 3 soft jaws for spindle A2-8 new price 11.000

Condition: good (used), functionality: fully functional, used (as new) 3-jaw chuck RÖHM D = 160 mm Mount MK 4 and 3-jaw chuck FORKARDT D = 160 mm Mount MK 5 Bdjdpfx Ajxwkczjb Tok

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm Bdjdpfoib D H Rex Ab Tsk - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, diameter 500 mm height 250 mm hollow 150 mm weight of the machine ca. 0,2 t dimensions 0,5 x 0,5 x 0,3 m Bdodpfx Abjxwzcrj Tek 3-jaw chuck with 2 sets of drill jaws Short taper mount size 11 (235mm bolt circle) Bayonet lock Chuck wrench

Condition: excellent (used), electric magnetic chuck Make: Braillon Model: EPBJ Length: 1500 mm Bsdpsxtwu Njfx Ab Tjdk Width: 550 mm Height: 115 mm Weight: 760 kg

Condition: ready for operation (used), Steinert Electro Magnetic Conveyor Belt Brand: Steinert Length frame A-A = 2000 mm Bdodpfexwftzox Ab Tjk Beltwidth: 1100 mm Driving: 2 kW Gearbox Dim. Block : 1150 x 1000 x 600mm On stock: 2 pieces.

Condition: used, This listing is for the IKA WERKE RO15 P 15 Position Digital Magnetic Stirrer The unit is in full working condition and ready for immediate release Key Features & Benefits: Synchronous Stirring: Designed for uniform stirring across all positions. Magnetic-Coil Technology: Provides noiseless, consistent stirring on each of the 15 positions, even under varied loads. Powerful Drive: 100% wear- and maintenance-free No moving parts Built for continuous operation Reverse Rotation Switch: Enhances mixing effectiveness. Easy-to-Use Interface: Foil keypad with digital display Error code display for diagnostics Speed adjustable in 10 rpm increments Compact, Closed Design: Protects against spills and is easy to clean. Removable anti-slip mat adds extra security for vessels. Technical Specifications: Number of Stirring Positions: 15 Max Stirring Volume per Position: ~400 ml Speed Range: 0–1200 rpm Bjdpfxoxwc E Uj Ab Tjdk Plate Material: Stainless steel (1.4301) Plate Dimensions: 280 x 470 mm Power Supply: 100–240 V, 50/60 Hz Protection Class: IP 40 Weight: Approx. 7–8.6 kg Ambient Temp. Range: 5–40°C

Condition: used, Permanent circular magnet Diameter: 220 mm Height approx.: 70 mm Bdjdpfexwkchox Ab Tjk Weight approx.: 16 kg

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-preserved Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical diameter 150 mm, supplied with chuck key and a set of hardened stepped jaws, as well as the assembly and operating manual for the Horvath eccentric clamping chuck in what is presumably the original wooden case (Hahn & Kolb). Year of manufacture unknown. Bdsdeg Umb Espfx Ab Tok From our own inventory. Eccentric lathe chuck for clamping workpieces in a lathe. Price / details on request. All technical details are subject to error or typographical mistakes. Sales exclusively to countries within the European Community.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Bodsvyuy Hspfx Ab Tedk Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: 115090324, KITAGAWA POWER CHUCK e.g. OKUMA, MAZAK, MORI Three-jaw chuck with serration. cylindrical holder for spindle flange Spindle mounting flange in scope of delivery KK6 Drawtube connection thread M60x2,0mm currently under investigation Jaw interface: 1.5 x 60 ° Weight without clamping jaws approx. 30 kg For further inquiries, we are at your disposal. Bdedpfx Aoi Hqhqeb Tok Shipping costs on request

Condition: ready for operation (used), Lenoir Electro Magnetic Conveyor Belt Brand: Lenoir Dim. Belt Conveyor: A-A = 3000 mm Beltwidth: 1400 mm. Driving: 15 kW Bdsdoxwftuopfx Ab Tek Dim. Block : L= 2100 x W=1400  x H=550  mm Including rectifier.

Condition: used, This listing is for a Stuart Scientific SB301 Magnetic Stirrer The unit is in full working condition and is ready for immediate release. Bsdpfx Aoxv Ac Djb Todk Overview & Intended Use The SB301 is a robust, heavy‑duty magnetic stirring device designed for laboratory applications where relatively large volumes of liquid (up to around 30 L of water-equivalent) need to be stirred. It is used in chemistry, biology, environmental labs, or anywhere you need continuous stirring without introducing mechanical agitation (i.e. no overhead stirrer, no impeller). It emphasizes stable speed control, durability, and strong magnetic coupling (i.e. strong magnetic fields to drive the stir bar reliably even under load

Condition: used, functionality: fully functional, total width: 128 mm, total length: 260 mm, total height: 50 mm, overall weight: 12 kg, Magnetic clamping plate Eclipse Clamping surface: 260 x 128 mm Height: 50 mm Weight: 11.60 kg Bdjdpfx Aexvy Aujb Tok

Condition: excellent (used), Permanent magnetic chuck Magnetic plate Dimensions: 200 x 500 x 75 mm Weight: 60 kg Bodjxtmthspfx Ab Todk (28673)

Condition: used, Rubo H ½" Rubo H ¾" Bdsdpfx Aoxvtu Rob Tjk Rubo H 1" Rubo H 1 1/4" Rubometric GR 3 ½" Rubometric GR 4 ¾"

Condition: ready for operation (used), - 500mm faceplate by Bison - good condition - individually adjustable jaws - mounting size 8 Bdodpfx Aoxvmmmsb Tok - 125mm bore - 4x T-slot

Condition: ready for operation (used), Master Magnets Electro Magnetic Conveyor Belt brand: Master Magnets Limited Length frame A-A = 2200 mm Bdodew Dxr Hepfx Ab Tjk Beltwidth: 950 mm. Driving: 2,2 kW Gearbox Dim. Block : L= 1500 x W=800 x H=570 mm Power Block = 2,5 kW Including rectifier.

Condition: excellent (used), Electromagnetic clamping plate (28490) Length 500 mm width 250 mm Bjdpfetrngpox Ab Tjdk height 75 mm Voltage 90 Volt 0.4 Ampere Weight 58 kg