Used Lux Mill for sale (9,981)

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Dcjdpfozf Ibdsx Ac Hei Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm Dodpfxszf H R Rj Ac Hoci MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling heads: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW Dodpfx Acjzf H Nyj Hsci EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8578

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Dcjdpezf H Iisfx Ac Hji Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Dodjzf H Ezjpfx Ac Heci Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Dcodpfx Aszhm Afjc Hsi Coolant tank: 30 l Delivery rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-ribbed belt EQUIPMENT Arbor clamping Cooling system with 30-liter tank Coolant tank with quick-release fastener Control panel Work light Coolant hose CE marking

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Siemens control system, 12-position tool changer, BT40, Travel range X500 - Y300mm, Renishaw touch probe, Dsdszkk Nuopfx Ac Heci Accessories.

Condition: new, Features > 5-axis simultaneous CNC machine > Basic structure made of polymer concrete > Wet/dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoder Dcodpfohqhkisx Ac Hei > Integrated control with touchscreen Options > Machine base frame > Various Zero-point clamping devices: T-slotted plate, four-jaw chuck, precision vice and blank holder > Automatic placement system > 3D measuring probe > Why buy? Simply finance. Talk to us! The iMG 1010 is a compact solution for processing workpieces up to 100x100x100 mm. With its basic structure made of polymer concrete, it enables precise processing of numerous materials such as titanium, steel, CoCr, ceramics, sapphire, zirconium or aluminum. Particularly noteworthy is the arrangement of the Y-axis, which ensures high stability and enormous vibration damping thanks to its installation positions. Almost all positions on the workpiece can be reached without reclamping. The selection of workpiece clamping devices and holders in conjunction with the zero-point clamping system makes the machine a versatile machining center. Its design enables wet/dry machining without time-consuming retooling. The CNC machine can be extended with an optional loading and unloading system, which accesses the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. The system can be integrated into network-controlled, automated production processes using software interfaces. The maintenance-friendly design and the long-lasting direct spindle drives save service costs and time and offer a reliable machining system. During the design phase, care was taken to ensure that all elements are easily accessible and yet protected from external influences in order to guarantee a long service life. The sophisticated system offers numerous options for expansion.

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: Dcodpfx Ashqhlvoc Hji -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. Djdpfelkbpzox Ac Hoci HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: new, machine/vehicle number: 280261 0001, Features > CNC machine ready for mains connection > Low-noise due to maintenance-free servo motors Dcjdolnikkepfx Ac Hsi > ergonomically slim design > powerful isel control with maintenance-free servo motors > reliable linear units with steel ball screws are installed as drives > effortless operation thanks to height-adjustable display > network-compatible control PC with WINDOWS > user-friendly soft-lift hood > clamping of the workpieces by means of T-slot plate options > milling spindle 500W - 1200W > Linear tool changing station > Tool cooling as cooling spray or air version (CoolMin) > Length measuring probe > Vacuum clamping table > Maintenance unit with valve terminal > Substructure table with swivel screen and integrated keyboard > Substructure table is used to install the vacuum pump, cooling unit and other peripheral devices > Automatic hood opening > Safety light curtain > Why buy? Simply finance. Talk to us! The iCV 4030 EC is a compact tabletop machine with a proven, optimized chassis design. A practical substructure table with monitor and integrated keyboard is available as an option. The CNC machine has a modular design; all control components, including the isel CNC control and the control computer, are installed at the rear and are easily accessible for servicing. All linear axes mounted in the machine are from the isel range; they run with linear ball bearings on ground precision steel shafts. Backlash-free ball screw drives with various spindle pitches are used as drives. The machine table made of face-milled T-slot profiles offers a wide range of clamping options for individual workpiece fixtures and clamping devices. The iCV 4030 EC is suitable for numerous areas of application and industries; experience has shown that it is preferably used for machining. A comprehensive range of accessories tailored to your application rounds off the program.

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW Djdpfxjzkbnzs Ac Hsci weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm from a training workshop (vocational school) Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Condition: as good as new (ex-display), CNC Engraving Machine, CNC Milling Machine, CNC 3020 Desktop Engraving Machine / Mini CNC Milling Machine – 200 × 300 mm Working Area, Used Machine Manufacturer Engraving Machine Model 3020 Overall Dimensions Width: 400 mm Depth: 530 mm Height: 400 mm Controller Dimensions Width: 290 mm Depth: 325 mm Height: 175 mm Shipping Dimensions 500 × 400 × 390 mm 410 × 345 × 280 mm Technical Specifications Machine Type: Engraving Machine / Mini CNC Milling Machine Model: 3020 Serial Number (SN): 2501053020CZ12-11 Effective Working Travel: X-axis: 200 mm Y-axis: 300 mm Z-axis: 50 mm Power Supply: AC 200–240 V, 50 Hz (operates from a standard 230 V household/workshop power supply) Manufacturer Information Manufacturer: Changzhou Huajiang Electrical Co., Ltd. (China) European Importer / Distributor: CNCworld Group Sp. z o.o. (Jednia-Letnisko, Poland) Certifications Dcedpezka R Uofx Ac Hei CE RoHS FCC

Condition: used, Year of construction: 1986, Serial no. 2203-1703, travel range X/Y/Z 500 x 400 x 400 mm, universal milling table 660 x 380 mm (rotatable and swiveling), active digital display, lighting, maximum speed 3,150 rpm, tool vice. Dcodpfx Aszkaq Iec Hji +++ ATTENTION: This machine is part of an online auction! +++

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Dcodpsb Tmngofx Ac Hsi Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area Dcsdpfx Aszi Ex Usc Hji · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) Dcsdpfozi Da Rsx Ac Hei - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Dedpfx Asziy U Djc Hoci Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Capacity: 1200 kg/h Features: 6-roll mill; conditioning screw; water treatment

Year of construction: 2006, condition: good (used), CNC Milling / Turningcenter Machine type: DMG GMX 200 linear Control: Siemens 840D Year: 2006 SPECIFICATIONS Max. swing over bed: 560 mm Turningdiameter: 400 mm Spindle speeds: 0 - 4.000 rpm Spindle power: 45 / 36 kW Torque: 750 Nm C-Axis CNC-Spindle tilting for cutting and turningopertations Max. revolution: 12.000 rpm Spindle power: 13,2/22 kW Travel X-Axis: 485 mm Dsdpfx Acsziy D Ss Heci Y-Axis: 80 +/- mm Z-Axis: 1.070 mm Rapid motion: (X/Y/Z): 40 / 24 / 70 m/min. Angular range: +/- 120° Tailstock: NC Quill: MK 5 Equipment Steady rest: SMW SLU-3.1 Chip conveyor paper band filter Cooling pumps: 8 bar; 20 l/min

Condition: used, functionality: fully functional, ERNAULT SOMUA Milling Machine Type: ZHV1 Travel: 750 x 250 x 400 Dcodpfx Asziy A Usc Hsi Table surface: 1200 x 300 Weight: 1400 kg

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw Dedpfx Ajzixq Rsc Heci

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Dodpfx Acjzixd Ds Hjci Drive motor 250 kw

Condition: used, power: 7.5 kW (10.20 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed Dcsdpfx Acezixdwj Hsi

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Dcsdpjzixdkjfx Ac Hji Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Dodpszixddefx Ac Heci Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW