Used Log Rounding Machine for sale (104,007)

Year of construction: 2025, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Djdpfx Abohgh I Ss Tjwf Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working range: 4,150 mm, travel distance X-axis: 4,150 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 2,500 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 250 mm, table length: 4,500 mm, operating speed: 1,000 mm/s, table width: 2,300 mm, tank capacity: 8,000 l, pressure: 4.1 bar, table height: 900 mm, operating pressure: 4,000 bar, warranty duration: 6 months, table load: 2,500 kg, overall weight: 8,000 kg, input frequency: 50 Hz, power: 45 kW (61.18 HP), D2 MONSTER M5 high end waterjet cutting machine, completely reconditioned 2025, all vital components replced and condition even better then new. This machine had very little working hours ( showroom useage ) but is currently being completely overhauled to ensure full warranty. The machine will be supplied as new with newest options and developments, including full warranty of 6 months. X-axis range 4150 mm Y-axis range 3200 mm Z-axis range 250 mm C-axis range +/- 275 degrees A-axis range +/- 70 degrees Table size 4500x2500 mm, cutting area in 3D: 4000x2300 mm Tilting arms for loading and unloading slabs up to 2500 kg. Pump BFT Ecotron 40.37 37 KW 3,8 L/min New pump, working hours 0 . Software depending the application ( Metal or Stone ), to be discussed This machine is built for high precision work and foreseen with all possible options from cameras to anti collision feeler, electronic abrasive doseage with vacuum control, etc etc. Dsdpfjvdnpiox Ab Tswf Machine readyness to be agreed. This machine has a new value over 300.000 euro Water purification for pump water available on request as well as abrasive removal system.

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Dwodefx N Uispfx Ab Tef Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Fully automatic solvent cleaning system KP50 HMA for operation with solvents (hydrocarbon or mod. alcohol) under full vacuum. The cleaning and drying process takes place fully automatically in a closed working chamber under vacuum (≤ 1 millibar). Components are cleaned by spraying, pressure flooding or ultrasound with freshly filtered and distilled solvent from the two storage tanks. There is also the option of vapor degreasing with high-purity solvent vapor directly from the main still. The final vacuum drying ensures 100% dry components and the double condensation stage ensures low solvent loss and the lowest emission and OEL values. Technical data / equipment: 2-tank FULL VACUUM system incl. main and bypass still Version for flammable solvents (FP ᐳ55°C) incl. basket holder with swivel/rotation device Djdpfx Ajtrfhnob Tswf Basket dimensions: 520x320x200(h) mm Batch weight: max. 50 kg/batch System dimensions: approx. 2,050 x 2,000 x 3,000 mm (W x D x H) - Ultrasound: 750 W, 40 kHz (Fab. Weber Ultrasonics) - 2 pcs. Eaton size 2 bag filter + preparation for additional filter - Corrosion protection tank - Automatic door of the working chamber - Working chamber door in glass - Double loading table (can be moved crosswise) in front of the working chamber - 12" control panel - Main and bypass still - Remote maintenance module - Exhaust air fan A cooling unit can be supplied OPTIONALLY if no cooling water is available on site. Price excl. VAT, transportation, installation/commissioning

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW Dwodpfsfwfpbsx Ab Tof

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-flood cleaning system - Parts cleaning system for the highest requirements or precision and ultra-fine cleaning basket dimensions: LxWxH 600x400x300h mm max. loading weight: 150kg; loading trolley in front of the unit included 3-tank version: Cleaning (600 liters) Rinsing I (600 liters) Rinsing II (600 liters) Plant electrically heated Dsdpfx Absg Itg Ej Tewf - Cleaning method: Spraying, injection flooding, ultrasound - Ultrasound (rod transducer): 3,000 watts eff. / 6,000 watts peak - 30kHz - Basket during cleaning, rinsing and drying process standing, swiveling or rotating (freely selectable in the program) - Hot air and vacuum drying (vacuum pump Fab. Busch 300 m3/h) - full filtration of all tanks (3), each with Topline bag filter (Fab. Eaton), filter fineness freely selectable - automatic water refill per tank - automatic chemical dosing (0,4 - 4%) at tank 1 (cleaning) - preparation for coalescence oil separator - preparation for installation of a VE-circulation system for treatment of rinsing water control: Siemens S7-1200 with 20 programs

Condition: new, Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dwsdpohl H Ubjfx Ab Tsf

Condition: new, Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Dwsdpfondcbyox Ab Tsf

Condition: ready for operation (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, TECHNICAL DETAILS Clamping force: 2,000 kN Screw diameter: 50 mm Tie bar distance: 520 mm Shot volume: 392 cm³ Injection pressure: 2,000 bar Dedpfoxzfh Tsx Ab Towf Mould height (h x v): 520 x 520 mm Platen size (h x v): 728 x 728 mm Minimum installation height: 250 mm Maximum platen opening: 900 mm Opening stroke: 650 mm MACHINE DETAILS Control system: Selogica Dimensions & Weight Machine dimensions (L x W x H): 5.45 m x 1.95 m x 2.1 m Total weight: 7,300 kg Operating hours: 64,218 h EQUIPMENT Screen language: German CEE socket 16A Hydraulic core pull 1x Pneumatic core pull 1x Air valve 1x Water battery Levelling elements EUROMAP 12 interface Interface for handling Schuko socket 10A Mould heating 12x Note: Machine is sold without material hopper.

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Opening stroke 300 mm This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Djdpfsx D R T Hox Ab Towf Application Types Injection Moulding

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC Dwjdpjdx Axfjfx Ab Tjf • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: excellent (used), Year of construction: 2009, operating hours: 8,000 h, functionality: fully functional, compressed air connection: 8 bar, warranty duration: 6 months, Equipment: documentation/manual, FOR SALE – TOSH LOGICA 05 / TZS1 High-Precision 1/2 Colour Pad Printing Machine for Heels, Wedges & Cylindrical Rolling Applications Offered for sale: TOSH Logica 05 / TZS1 – an industrial pad printing machine designed for demanding 1/2-colour decoration applications requiring high precision, repeatability, and controlled rolling movements. This model is optimized for the footwear industry, but thanks to its robust construction and rolling printing capabilities, it is also suitable for many non-footwear applications, such as cylindrical objects that demand precise controlled rolling transfer. Djdpfx Aexyiprob Tswf TECHNICAL HIGHLIGHTS - Fully electric drive with comprehensive numerical control for every movement, ensuring outstanding print stability, accuracy, and repeatability. - Hermetic oval ink cup system – extended size 340 × 120 mm, supporting large clichés and extended printing surfaces. - Standard cup diameter: 2 x 160 mm included, but this unit is equipped with the larger 340 × 120 mm variant for extended artworks or long rolling prints. - 1 fixture (toe/counter-toe type) with vacuum hold-down, originally designed for heels/wedges but fully adaptable to custom jigs for other products. - Advanced NC-controlled rotation axis enables precise angular positioning from 0° to 180°, supporting complex shapes and asymmetric objects. - Supports multiple printing modes: • Front/Back cycle • Rolling cycle • Combined cycle (mixed rotation + rolling) - Programmable pad descent stroke for irregular geometries. - Decoration area limiting device – ideal for textures, partial prints, and precise transfers of artwork. - Self-diagnostic function, memory for all parameters, and fast job changeovers.

Year of construction: 2000, operating hours: 2,000 h, condition: used, functionality: fully functional, For sale is a Herrmann ultrasonic welding system HS DIALOG active control with 4.5 kW (400V), including control unit and workbench. It was used for series production in the automotive sector. Everything visible in the pictures is included in the scope of delivery (no sonotrode). Warranty: No warranty is provided. Inspection and functional testing can be arranged on site by appointment. Total weight approx. 250 kg, ground-level access, forklift may be required. Djdpfxjv H Ucus Ab Towf

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. Dodpfx Abowqdtpo Tewf The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: ready for operation (used), Herrmann HIQ Dialog 1200 SpeedControl Ultrasonic Welding Machine Generator rated power: 1200W Operating hours: 8704 h Ultrasonic active operating hours: 3 h Weldings performed: 61680 Year of manufacture: 2010 Cylinder diameter: 32mm Piston rod diameter: 12mm Cylinder stroke: 100mm You are welcome to visit us for a viewing. We can arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Dwjdpfx Aowcb Dijb Tof Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2011, condition: ready for operation (used), Simionato packaging machine. Located locally in Hungary (EU), Vacegres. Dedpsxcf U Aofx Ab Tewf

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Dwjdpfxev Dt Spo Ab Tsf Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: reconditioned (used), Year of construction: 2008, operating hours: 150 h, functionality: fully functional, compressed air connection: 6 bar, input voltage: 230 V, total width: 1,750 mm, total length: 1,350 mm, total height: 2,050 mm, type of input current: AC, overall weight: 550 kg, plate length: 350 mm, plate width: 180 mm, year of last overhaul: 2024, Equipment: documentation/manual, safety light barrier, Polish distributor TOSH offers for sale a used industrial pad printing machine TOSH Logica 05 after complete servicing. The device stands out for delivering top precision and reliability on the market. The machine is designed for printing on plastics, metals, glass, or ceramics. TOSH srl machines utilize electric drive, ensuring full control over the pad printing process, high print quality, and perfect repeatability. The modular design allows configuration to be adapted to production requirements and enables multi-color printing. The LOGICA series is intended for industrial applications and is valued for its durability – machine lifespans are measured in decades and their reliability allows continuous operation in production environments. TOSH represents one of the most advanced and efficient pad printing solutions in the world. Device specification Model: TOSH Logica 05 + INDEXER PRN 460 Type: automatic multi-color pad printing machine with programmable indexer Condition: used, after comprehensive service by an authorized TOSH representative Year of manufacture: 2009 Color configuration: 2 colors, ink cups Ø160 mm (new ceramic rings) Expandable up to 5 colors: • 3 colors Ø130 mm • 4 colors Ø90 mm • 5 colors Ø70 mm Printing area: circle Ø145 mm or square 105×105 mm (in current configuration) Equipment and functions Programmable part positioning: INDEXER PRN 460 TO100 cross table Quick-change ink cup system Tool-less guide towers Independent X-Y-R axis adjustment for cliche and pad position Full control of 7 operating speeds (ink cup movements, pad up/down, indexer speed) Transfer timing adjustable to 0.01 s Pneumatic modules: part rotation, clamping, vacuum Fixture for cylindrical surfaces with 180° rotation Key advantages of TOSH machines Very easy operation and rapid setup via step-by-step (JOG) mode Low operating costs – all axes driven by stepper motors 230 V power supply – fully electric drive, advantage over pneumatic systems Djdpfxeu Thi Aj Ab Towf High print precision – up to 0.01 mm Capability to integrate with production lines and robots Full technical documentation: CE, wiring diagrams, DTR, manual (PL/EN) Additional options Testing of the device before purchase Customization of the machine for specific projects: preparation of fixtures, selection of inks, pads, cliches, etc.

Condition: excellent (used), Electronic programmer RT 483 Dodpfxefz Nane Ab Tjwf No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Dedpolk R Epsfx Ab Tjwf Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2012, operating hours: 66,265 h, BATTENFELD EcoPower 110/350 (year of construction 2012) (110t) Electric, high speed, energy-saving. Control system: UNILOG B6 - touchscreen Operating hours: 66,265 Screw diameter: 35 mm Shot weight: 153 gr/hp Dwsdjwnz Eqspfx Ab Tof Injection pressure: 2083 bar Shot volume: 168 ccm Closing force: 110 t Distance between tie bars: 470×420 mm Max. Size of mold platens: 690×663 mm Ejector: hydraulic Toggle lever Robot interface Europe 67 Air valve x 1 Hydraulic core puller x 1 Hardened injection unit - bimetal Parallel movements Centralized lubrication Heating capacity: 10.4 kW Dimensions: Length / width / height: 4.50×1.50×2.10 m Weight: 4800 kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Dodpsu Smq Sofx Ab Tswf - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: ready for operation (used), Plant for log processing and sorting, with 2D measuring system KESAT, chain saw and loader LogLift F 165 Z. Infeed Chain conveyors, around the chain saw roller conveyors, sorting chain conveyor. Hydraulicylly driven pushing and lenght stops. Approximate dimensions 20 x 70m. Mesick 92S log measurement frame Control and evaluation PC, Win11 operating system Data output in .csv format Manufacturer and supplier KESAT, a.s. Djdpfxow U Axws Ab Tswf Installation date 03/2024 LOGLIFT F 165Z - all hydraulic cylinders are refurbished.

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle Djdpfxjdzqa Hj Ab Tswf 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Dodpfs Ebqnjx Ab Tjwf Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs * 5 litres METCOOL coolant Option: Machine base cabinet