Used Load Hook for sale (31,013)

Condition: new, Year of construction: 2014, Storage location number: 100539905 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Pin: 60/60 Hnedpfx Aszk Ah Nsp Hot Axle distance: 340 Stem width: 280 Mounting: SW48 With load hook: 12 tons Location: Passau

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m Hnodpfxerhzh Ss Ap Het UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Hodpfefi U E Dex Ap Hont Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Weight completely approx. 1750 kg with Demag chain hoist Connection to 400V 360 ° swivel range The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold See pictures Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: Hjdpfoxf Silex Ap Hsnt - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Hsdpsyay D Iofx Ap Hsnt Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: used, Year of construction: 2023, ---- New equipment 3 units available in stock in Dresden Lissmac Mini Crane LMK 400 TFE Equipment No.: 100569137 Year of manufacture: 2023 Price: 15,930.00 EUR net Lissmac Mini Crane LMK 400 TFE Equipment No.: 100324496 Year of manufacture: 2021 Price: 15,285.00 EUR net Data: Load capacity with 5m jib: 400 kg Outreach: 5000 mm Hook height: 4500-6000 mm Hnodezkzqpopfx Ap Hst Weight without ballast: 991 kg Ballast: 1070 kg Wheelbase: 2000/2000 mm Turning radius: 1500 mm Maximum wheel pressure: 14 kN Lifting speed: 2-8 m/min

Condition: used, Year of construction: 2023, ---- New equipment 3 units available from stock in Welzow Lissmac mini crane LMK 400 TFE Equipment No.: 100569140 Year of manufacture: 2023 Price: €15,930.00 net Lissmac mini crane LMK 400 TFE Equipment No.: 100569141 Year of manufacture: 2023 Price: €15,930.00 net Data: Load capacity with 5m jib: 400 kg Outreach: 5000 mm Hook height: 4500-6000 mm Hsdpjzkz Dcjfx Ap Hsnt Weight without ballast: 991 kg Ballast: 1070 kg Wheelbase: 2000/2000 mm Turning radius: 1500 mm Maximum wheel pressure: 14 kN Lifting speed: 2-8 m/min

Condition: used, Year of construction: 2020, operating hours: 2,030 h, Equipment: all wheel drive, Articulated boom, twin tyres, used vehicle Vehicle no. 3318, Volvo EW60E wheeled excavator, year: 2020, operating hours: 2,030, Powertilt with Lehnhoff HS03H hydraulic quick coupler, 3 buckets (1400 / 600 / 400 mm), hydraulic connections for attachments, load hook, grading blade 2,200 mm, 20 KMH, articulated boom, road lighting kit, tyres: 7.50 - 15, twin tyres with spacer rings, weight: 7,000 kg, Volvo diesel engine with 47.3 kW, air conditioning, radio, refuelling pump, On request please, financing and leasing possible, errors and prior sale reserved. Hsdpezvt T Hjfx Ap Hsnt

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Hsdszgrzqepfx Ap Hsnt Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Hjdpfx Apozgtzls Hjnt Subject to prior sale.

Condition: used, Year of construction: 2024, color: grey, loading space volume: 10 m³, loading space width: 2,420 mm, loading space length: 5,000 mm, loading space height: 800 mm, mileage: 1,001 km, first registration: 01/2024, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, flap, lashing points, swing-out flap. Body: Roll-off container with folding side walls and swing-out flap, approx. 10m³, in top condition! Roll-off container with folding side walls and swing-out flap - Manufacturer: RM | Type: ABPR - Built according to DIN 30722-1 - Internal length 5m - Internal height 0.80m - Internal width 2.42m - Floor: 5mm Hardox 450 - Folding, spring-loaded, and drivable swing-out flap (4.5t point loads) - Side walls folding and spring-loaded - All-around net hooks Hnedjzrf Tkspfx Ap Het - 2K paint RAL 7016 anthracite gray All information is without guarantee as the container is currently en route! ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: good (used), Load hook, retractable safety device, load securing device -Load securing device: Type 16 -Load capacity: 500 kg -Rope length: 6.7 m -Note: not for persons Hnedpfjwwqqnox Ap Hot -Dimensions: 720/240/140 mm -Own weight: 12.8 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: CR2344, ABUS crane system, overhead crane, gantry crane, workshop crane Load capacity / lifting capacity: 2t - 2000 kg Hnjdpezgbypjfx Ap Hot Track gauge: approx. 14,000 mm, overall dimensions: approx. 14,200 mm Year of manufacture: 2008 (rebuilt with new chain hoist, floor control, cable track and drive units) Abus GM chain hoist, 2000 kg lifting capacity, 6 m lifting height Overall height from top of crane to hook: approx. 950 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and available immediately Very good condition, inspection certificate is available We also have pillar-mounted swivel cranes and wall-mounted swivel cranes available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire using your postal code. Collection is preferred.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Hsdjzgvx Tspfx Ap Hent Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Machine Type: Two-rail gantry crane / crane system Load Capacity: 1,600 kg For sale is a used VETTER P300 PROFI crane system with crane bridge, manual trolley, and electric chain hoist. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, and general lifting and transport tasks in the industrial sector. Technical Data Span of Crane Bridge: 5,890 mm Support Distance L: 5,570 mm Support Distance B: 5,890 mm Length of Runway Girder: 6,150 mm Length of Cross Girder: 6,260 mm Overall Dimensions of System: approx. 6,590 x 6,590 mm Bottom Edge of Crane Bridge: 4,085 mm Bottom Edge of Portal Girder: 4,507 mm Overall Height: 4,905 mm Ceiling Height according to Drawing: 5,185 mm Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Classification: HC2 / S2 according to EN 15011 Steel Construction Group: 18/36/30 Electric Chain Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of Manufacture: 2020 Load Capacity: 1,600 kg Lifting Speed: 4.0 / 1.0 m/min Power: 1.50 / 0.37 kW FEM: 2m / M5 Protection Class: IP55 Duty Cycle: 40 % Number of Load Chains: 2 Weight with 5 m Lift: 65 kg Manual Trolley Type: SiCO-HF 2000 A Load Capacity: 2,000 kg Girder Width: 66 - 220 mm Weight: 17 kg Equipment Crane Bridge Electric Chain Hoist SIXX8AF Manual Trolley SiCO-HF 2000 A Load Hook Floor Control Main Disconnect Switch Cable Festoon / Power Supply Steel Support and Girder Structure Inspection Book Available EC Declaration of Conformity Available Assembly and Operating Instructions Available Transport Data Longest Component: approx. 6.3 m Heaviest Single Component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of Delivery VETTER P300 PROFI Crane System Crane Bridge Electric Chain Hoist SIXX8AF 1.6 t Manual Trolley SiCO-HF 2000 A Support and Girder Structure Control / Operating Elements Main Disconnect Switch Documentation / Inspection Book EC Declaration of Conformity Assembly and Operating Instructions Accessories as Shown in Pictures The machines, tools, and other items visible in the pictures that are not explicitly described are not included in the scope of delivery. Shipping or freight transport possible. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Durkopp Adler COMETA VBO CE Walking foot machine Featuring a swing arm and a large hook. Designed for the production of bags, cases, briefcases, and footwear. This exceptionally innovative machine enables sewing side finishes extremely close to the edge, thanks to a specialized needle plate. Moreover, the revolutionary swing arm, synchronized with the operator’s chair, allows for easy loading of both very small and very large materials. Maximum stitch length: 6 mm Hnodpfx Aoyy Rwmep Het Single-needle machine Large horizontal rotary hook Thread thickness: 60 – 20 Post height: 400 mm Post diameter: 42 mm Maximum sewing speed: 1400 stitches per minute Machine in perfect technical condition.

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 Hsdpfoy Avh Nox Ap Hent The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: used, Year of construction: 2018, operating hours: 4,760 h, Internal vehicle number: G400132 Available immediately at our yard in Kaufungen More information: Luis Lucena Viktoria Sologubova Liebherr R 946 NLC crawler excavator – OilQuick OQ90 – 45.1 tonnes – 4,760 operating hours German Liebherr R 946 NLC crawler excavator from 2018 with 4,760 operating hours. The machine has a 220 kW engine and a hydraulic OilQuick OQ90 quick-coupler system. Important condition note: The operator's cab is damaged. On-site inspection and detailed assessment of the damage are highly recommended. Technical specifications: * Vehicle number: G400132 * Vehicle condition: Used machine, operator's cab damaged * Category: Crawler excavator * Manufacturer: Liebherr * Model: R 946 NLC * Year of manufacture: 2018 * Operating hours: 4,760 hrs * Engine power: 220 kW (approx. 299 hp) Hnedpfxsy Rb Aue Ap Hot * Operating weight: 45,100 kg * Maximum travel speed: 5.9 km/h * Technical inspection: new * CE marking present * German machine Equipment: * Hydraulic quick-coupler system * OilQuick OQ90 quick coupler * Crawler undercarriage * Enclosed operator's cab * Work lights * Operating modes and engine speed control * Window heating * Control panel in the cab Quick-coupler data: * Manufacturer: OilQuick AB, Sweden * Designation: Quick coupler * Type: OQ90 * Year of manufacture: 2018 * Serial number: 002429 * Maximum operating pressure: 35 MPa * Maximum hook load: 19,000 kg * CE marking present Condition: * Operator's cab damaged * Sold in its current condition * The type and extent of the damage must be inspected and assessed on site * Further detailed photos of the damage are available upon request Inspection and functional testing possible by prior arrangement. Further information, detailed photos and videos are available upon request. Errors, changes and prior sale reserved.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Hnedpfx Aezy U Dnop Hst Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS14 + RIO RES, Technical Data: 1x Demag KBK 2 pillar slewing crane NL 500KG with Demag PK chain hoist There are 4 cranes available!! Load capacity at full outreach: 500KG Height: approx. 3.55m Underside of jib: approx. 3m Outreach: 3m Hook height: approx. 2.6m Total weight: approx. 300KG With 500KG Demag PK chain hoist Incl. bolts, cable trolley, trolley, end cap, etc. Hsdpfx Apsywfl To Hent Slewing range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim, Germany Further cranes with capacities 80-5000Kg available – please inquire See pictures Shipping via freight forwarding or collection only by appointment

Condition: new, We are the official Sunward dealer for Berlin, Brandenburg, East Saxony, and the Wittenberg district. Visit us and be impressed by our extensive selection and superior quality. We consistently stock around 20 excavators. Sunward SWE 90 UF 2PB – Fully equipped, new machine - Air conditioning - Operating weight: 9.6 t - Yanmar engine, 46.2 kW, displacement: 2,615 l - Adjustable boom - Load-holding valve (protective and safety valve on boom and dipper arm + overload warning device) - 2 additional auxiliary circuits - Aux 1 and 2 on joystick - Air-suspended comfort seat - LED headlights - Upper and front protective guards for cab - Refueling pump - Central lubrication Hnsdpfozt Id Uox Ap Het - Additional counterweight (+400 kg) - 5-year remaining warranty HS08 hydraulic quick coupler with lifting hook - 400 mm trenching bucket - 800 mm trenching bucket with teeth - 1.60 m hydraulic ditch cleaning bucket All details provided without obligation. Don't miss this unique opportunity to purchase a true professional machine at an unbeatable price. Sunward is among the world's 20 largest excavator manufacturers. Inspection possible at any time by prior telephone appointment. We accept your used machine as trade-in.

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes Hnjdpfjx Ebrpox Ap Hjt SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: Hedpjy Trycjfx Ap Hent * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, 1x BKRS gantry crane Rated load: 50,000 kg Span: 21.5 m Cantilever: 2 x 6 m Lifting height above rail: 10 m Hook travel: 45 m Radio remote control Cable drum suitable for 110 m Complete with crane rail UIC60 length: 2x 110 m The crane was used for a tunnel boring project Demag components Hjdpfx Apoyx Dlho Hsnt

Condition: used, clear span: 2,705 mm, load per truss pair (max.): 2,400 kg, Technical specifications for the pallet racking crossbar: Racking system: Jung Heinrich Type: Esmena Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: RAL1007 yellow Crossbar type: N140x40 SEG4 Box profile: 140 x 40 mm Clip: 4 hooks Clear width: 2,705 mm Maximum load per pair of crossbars: 2,400 kg with evenly distributed load 02x Locking pin, used Design: Fully galvanized For securing the longitudinal beams Hnjdpfx Apsz A Dyuj Hjt against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2020, condition: good (used), Hook, retaining arm, retaining bracket -Hook: Holding arm -Load capacity: 125 kg -Number: 2 hooks available -price: per piece Hnsdpfx Ajx Ex U Dep Hjt -Dimensions: 800/325/H125 mm -Weight: 9.4 kg/pc.