Used Lifting Frame for sale (26,391)

Condition: new, table length 1600 mm Iiedpfx Aoupxgfsfieh table width 800 mm stroke height 900 mm 310 mm weight max. in kg 500 kg weight of the machine ca. 0,16 t 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: good (used), Year of construction: 2000, functionality: fully functional, The frame press is in good condition, professionally and conscientiously maintained. 3 vertical, 2 horizontal pressure cylinders, including pressing unit for angled elements Pressing pressure is finely adjustable Press width: 3450 mm, height 2250 mm Length 4350 mm, height 3000 mm, depth 800 mm Further information available via email or phone. Private sale, therefore no exchange, no warranty, and no guarantee. Sale is conducted with exclusion of any form of liability. No shipping. Iisdpfx Asxgn E Sjfijh

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ijdpfxsvvkmbe Afijih

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Iijdpfxsdzqddo Afieh Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Year of construction: 2017, total width: 950 mm, total height: 2,350 mm, total length: 1,330 mm, Empty weight: 768 kg - Number of units [pcs]: 1 - └ Unit 1: - - Type of unit: Contact roller - - Sanding belt width [mm]: 430 - - Roller diameter [mm]: 150 - - Roller material: Rubber - - Motor power [kW]: 5.5 - Max. sanding width [mm]: 400 - Feed table length [mm]: 220 - Output table length [mm]: 320 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 - Year: 2017 - Documentation available: No - CE marking present: Yes - Serial number: 305 - Voltage [V]: 400 - Current consumption [A]: 13 Iiodjxdk I Depfx Afieh - Transport dimensions: 1330mm x 950mm x 2350mm (l x w x h) - Transport weight [kg]: 768kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), -KOM 1613- On offer here is a Gebr. Dickertmann hoist with a Demag chain hoist type PK2-F. Technical data chain hoist: Type: PK2-F Year of construction: 1968 With one load line: Iodpfx Asvca Ubofijih Load capacity (kg): 250 Main speed (m/min): 10 Fine stroke speed (m/min): 2.5 With two load lines: Load capacity (kg): 500 Main speed (m/min): 5 Fine stroke speed (m/min): 1.25

Condition: new, table length 2200 mm table width 1500 mm stroke height 1850 mm weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. Iedpfsupxwkjx Afijih connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: used, Year of construction: 2020, = Additional Options and Accessories = - 12-volt power socket - Tow bar Ijdpfx Ajw Tlqysfisih - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Cruise control - Air conditioning - Center armrest - Radio/CD player - Central locking = Further Information = General Information Odometer reading: 132,106 km Registration number: V-34-NHF Technical Information Power: 96 kW (131 hp) Number of cylinders: 4 Engine displacement: 2,299 cc Fuel type: Diesel Transmission: 6-speed manual gearbox Dimensions Dimensions (L x W x H): 656 x 207 x 340 cm Wheelbase: 368 cm Weights Unladen weight: 3,020 kg Payload: 480 kg Gross vehicle weight: 3,500 kg Functional Body manufacturer: France Elevateur 121FT Interior Number of seats: 3 Environmental Emission class: Euro 6 Maintenance APK (Periodic Technical Inspection): valid until 02.2026 Product Safety Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine Iiedpou R Tbhsfx Afijh sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Motor: 5.5 kW, weight: 550 kg

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Features and technical specifications: Electro-hydraulic frame press control Pressing force up to 1,200 kg Two movable longitudinal pressure beams mounted with double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders can be adjusted via quick-release pressure lever with automatic locking Two electro-hydraulic control valves (with 3 switching stages) operated by hand levers This allows for precise pressing and assembly of even the most complex frame constructions Working height x working length: 2,000 x 3,000 mm Equipped with 3 vertical pressure cylinders Equipped with 2 horizontal pressure cylinders Stroke of pressure cylinders: 120 mm Three-phase motor: 1.3 kW Iodpfx Afewwxywjioih Pressure control unit / pressing force adjustable: 0 - 60 bar Space requirement: 3,950 x 900 x 2,550 mm Weight: approx. 620 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Ijdpfxsxc Rbbs Afijih Returningspeed: 9,06 mm/sec

Condition: excellent (used), Year of construction: 1986, Frame press T2 RP year of construction 1986, 2,2 kw Ele..-Hydraulic 3 press cylinders vertical, 2 horizontal Iiedpsu Rp Eiefx Afish Adjustable pressing pressure 0 - 2000 kg 2500 x 3000 mm pressing size Space requirement 4000 x 950 x 2600 mm

Condition: new, Lifting capacity 300 Kg Magnetic field 228 x 122 mm Iiodpfxevblgaj Afijh weight 16 Kg dimensions 0,23 x 0,122 x 0,112 m

Condition: good (used), Load capacity: 200 kg Tipping height: 2200 mm Container size: 800x600x550mm Iisdpfxoum Slvs Afioh

Condition: used, Frame clamping element (WS15) HOLZ-HER - used - ATTENTION: SET price for 4 pieces! Clamping cover type O, Clamping to console via toggle switch, Opening/closing via toggle switch ----- Technical data ----- Clamping range: 40 - 115 mm Isdpfx Afovtrk Asijih

Condition: used, Year of construction: 1993, Used machine Ijdpfxew I Uy To Afisih Year of manufacture: 1993 Frame dowel and slot mortising machine Double-jaw chuck for tools up to 20 mm shank diameter 1.5 kW motor Position adjustment for 2 levels, pneumatic (0-100 mm) Max. drilling depth: 150 mm Precision indexing rail with 12 mm pitch, center detent and cross adjustment 320 mm 2 pneumatic safety clamping cylinders Slot mortising device lowerable with 2 program cams Availability: short-term Location: Flörsheim

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 400,000 kg, Portaalrichtpers 400 ton Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Iiodpjxcqkpsfx Afioh Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1 Iodowh T Dljpfx Afijih

Condition: new, table length 2200 mm Isdpevn U D Isfx Afisih table width 1500 mm stroke height 1900 mm weight max. in kg 3000 kg total power requirement 1,5 kW stroke speed - idle stroke upwards 55 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,650 t dimensions of the machine ca. 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) Iiodpfx Afsrdy Ivsioh 04x workbench crossbars, used Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Lifting capacity 2000 Kg Magnetic field 350 x 150 mm Iedsvblgmspfx Afioih weight 70 Kg

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 02x workbench stand, used Material color: white frame profile: approx. 85 x 65 mm stand height: approx. 900 mm stand depth: approx. 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: green INP profile: approx. 80 x 42 mm clear width: approx. 2.880 mm 16x machine screws, M8 x 35 mm 16x nuts, M8 32x washers, M8 The pictures are for illustration of the material. The material color may differ if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. General information about the article: Iiodpfxohpx Ewe Afish This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 1000 kg 190 mm connected load frequency 380 V total power requirement 0,75 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1,3 x 0,8 x 0,2 m Iiodpfx Afsfrztxsijh The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table length 910 mm table width 500 mm table height 350 - 1300 mm Iisdpfxjupxlhe Afijh weight max. in kg 350 kg 950 mm stroke height 1300 mm weight of the machine ca. 110 Kg dimensions of the machine ca. 100 x 550 x 400 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, table length 1825 mm table width 660 mm Iedpfsupxptox Afioih stroke height 750 mm 20 mm weight max. in kg 450 kg weight of the machine ca. 130 Kg 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp.