Used Liebherr R 954 for sale (237)

Condition: used, Year of construction: 2015, operating hours: 7,829 h, Beautiful machine – top specification! Liebherr Wheel Loader L 542P 2 plus 1 Serial No.: VATZ1269KZB036900 Year of manufacture: 2015 Operating hours: approx. 7,829 Machine delivered: 24/04/2015 Last recorded service: 27/06/2019 at 2,500 hours Liebherr 4-cylinder inline engine, water-cooled with turbocharging and intercooler, 156 HP Hydrostatic drive with 3 speed ranges Travel range 1: 0 – 6.0 km/h Travel range A1-2: 0 – 16.0 km/h Travel range A1-3: 0 – 36.0 (40) km/h Gijdpfxsyumpme Af Uop * Automatic climate control – maintains the set temperature * BSS ride vibration damper (oscillation damping) * Central lubrication system – Liebherr factory install * 3rd and 4th hydraulic control circuit, e.g. for high tip bucket, grapple bucket, sweeper, etc. * Joystick lever lock * Sweeper equipment – with free return line + power socket at loader arm * Reversing camera with monitor in display * Industrial axles with 100% differential lock * Engine air intake via TOP-AIR pre-filter * Access aid for easier cleaning of windscreen (step) * Premium touchscreen display * Comfort driver's seat with pneumatic suspension * Seat heating * Heated exterior mirrors * Steering wheel adjustable in tilt and height * Left-hand opening window in the door * 4 x LED work lights on cab roof front * 4 x additional LED work lights on cab roof rear * Lint screen over cooling pack prevents contamination * Reversible fan for cleaning radiators (fan runs in reverse) * Radiators with coarse mesh for easier cleaning * External coolant pre-heater with 220V plug * Amber beacon, cab roof centre * Battery master switch * Radio with USB * Fire extinguisher * Rear towing coupling * Automatic engine shut-off after 5 minutes at idle speed * Rear bumper/ballast weight reinforced Permissible total weight: 17,000 kg; Unladen weight approx. 15,000 kg Length: 7,200 mm; Width: 2,500 mm; Height: 3,280 mm Tyres: 20.5 x 25 VA L4 – 95% - like new; 20.5 x 25 HA L4 – 95% - like new Offer includes hydraulic quick coupler + 2.8 cbm bucket: €61,300 net * Optional equipment available at extra charge: * High tip bucket from 3 – 5.5 cubic metres from €4,900 * 4-in-1 bucket (grapple/dozer bucket) * Grapple bucket 3 cubic metres €4,350 * High-capacity bucket 5 cubic metres €3,990 * Pallet forks (5 tonnes) €2,190 * Pallet forks (8 tonnes) €3,450 * Also available with onboard scales at extra charge: * Pfreundt WK 50 €3,900 * Pfreundt WK 60 €5,900 All prices are net export/international, plus 19% VAT for domestic customers. Transport to your location can be arranged. Sale to commercial customers or export only. Sold as-is, as seen. No warranty or guarantee. Kilometre and hour readings are based on instrument displays, we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer. The provided information does not represent guaranteed properties/features. Description and details are for general vehicle identification only and do not constitute a warranty in the legal sense. Completeness of information is not guaranteed.

Condition: used, mileage: 185,652 km, power: 240 kW (326.31 HP), first registration: 10/2011, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 8x6, fuel: diesel, color: yellow, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 10,400 mm, Year of construction: 2011, construction height: 3,900 mm, This used Liebherr LTC 1045-3.1 is a powerful truck with crane superstructure, ideal for commercial applications. The crane was manufactured in 2011 and has a mileage of 185,652 km. Powered by a robust diesel 6x6 drive, the truck delivers 240 kW (326 hp) and a displacement of 7,201 cc, ensuring reliable performance and high efficiency. The vehicle is accident-free and features a yellow paint finish. It comes equipped with a green emissions sticker (Euro 4), allowing operation in urban environments. The crane supports various loading options and is perfectly suited for construction sites or other specialized operations. A Certificate of Conformity (CoC) is available, and all technical data has been determined to the best of our knowledge. Giodpfxjxvfa Sj Af Usp Viewings are possible Monday to Friday and on Saturdays. If interested or for further questions, please contact us by phone or email. Registration service and delivery within Germany are available at an additional cost. Sale to commercial customers only (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: good (used), functionality: fully functional, Year of construction: 2002, operating hours: 14,449 h, machine/vehicle number: 0290, Used CNC gear hobbing machine Giodeyiyhxopfx Af Uep Manufacturer: Liebherr Model: LC150 Year of manufacture: 2002 Serial No.: 0290 With loading portal

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Giodpfeyt Rvhsx Af Ujp Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: used, Year of construction: 2017, LIEBHERR - LS 200F - 2017 - used condition as shown on photos - under power, can be tested Giodpfxeyt I Afj Af Usp MORE SIMILAR LIEBHERR machines: LIEBHERR - LSE 200 - 2017 LIEBHERR - LFS 200 - 2016

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Operator's cab hydraulically elevating Cabin with front protection grille Radio system Air-suspended driver's seat Positioning swing brake Lift cylinder damping Lift cylinder with pipe rupture protection Overload warning device Generator drive mounting kit Gjdeyt Idpspfx Af Uoip DRIVELINE WARRANTY

Condition: used, Year of construction: 2016, operating hours: 17,628 h, scale; quick-change system Godpev Ilwrefx Af Uoip

Condition: excellent (used), power: 47.5 kW (64.58 HP), operation weight: 6,000 kg, tire size: 405/70R18, tire condition: 80 %, Year of construction: 2023, operating hours: 818 h, Equipment: cabin, LIEBHERR L506 Compact G8.0-D year 2023 hours : 818 hrs. ROPS hydr. quick coupler standard bucket Gijdpfxeygrw Hj Af Ujp pallet forks Mitas tyres 405/70R18 -approx 80% good CE/EPA engine with 47,5 kW operation weight: 6 to.

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Gjdpfx Ajwdmy Eef Uoip Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: used, Year of construction: 2019, operating hours: 3,229 h, Liebherr L 538 Z 2plus1 Z-lift frame – as new – Regularly serviced by Liebherr. Delivered to customer on 29/03/2019 * 1st service at 485 hours on 30/03/2020 * 2nd service at 928 hours on 08/01/2021 * 3rd service at 1425 hours on 27/08/2021 * 4th service at 2520 hours on 20/03/2023 Chassis No. VATZ1559JZB53233 Year of manufacture: 2019 Operating hours: approx. 3,229 Lift frame with Z-kinematics – earthmoving 4-cylinder inline engine 111 kW/151 HP, water-cooled, turbocharged, emission stage 4 Length 7,200 mm, machine width: 2,500 mm, height: 3,280 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride vibration damping BSS – lift frame damping * Central lubrication system, Liebherr factory installed * Automatic climate control (maintains set temperature automatically) * Steel lighting bracket instead of plastic * Access aid in front of windscreen for easier cleaning * Premium touchscreen display * Opening window in cab door * "Comfort" driver’s seat with pneumatic suspension, seat heating, and headrest * Adjustable steering column * Comfort radio with hands-free kit * Automatic bucket return * 3rd hydraulic circuit for attachments such as high-tip bucket, sweeper, grapple bucket, etc. * 2 rear LED work lights on cab roof * 4 front LED work lights on cab roof * Engine air intake with pre-separator for preliminary air cleaning * Programmable lift and lowering speed * Tilt cylinder rod protection * Automatic fueling pump with auto shut-off * Road approval Tyres: 20.5 x 25 L3, front axle 2 x 50% * Tyres: 20.5 x 25 L3, rear axle 2 x 50% (The tyres shown in the photos are fitted only for transport) Also available with agricultural tread – see photo no. or earthmover tread – see photo no. * Automatic self-locking differentials, 45% locking value, on both axles Net price with fixed 2.5 m³ bucket: €93,500 net plus VAT Gijdpfeyrzn Eox Af Uep Optional equipment at extra cost: * Quick coupler incl. hydraulic preinstallation: €3,550 * High-tip bucket 3–4 m³ * 4-in-1 bucket (grapple/levelling bucket) 2 m³: €3,950 * High-volume bucket 5 m³: €3,990 * Pallet forks, 5 tons from €2,190 (8 ton option available) Available with on-board scale at extra cost: * Pfreundt WK 60: €5,900 Note: The brochure specification only partially matches this machine: – This machine has emission stage IV, brochure shows stage V. All prices are net export – with valid number and papers. Sale only to businesses or for export. Sale in current condition as the machine is. No guarantee or warranty. The stated odometer or operating hours readings are from the respective counter; no guarantee for accuracy. Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided does not constitute guaranteed features. Description and information serve solely for vehicle identification and are not a warranty.

Condition: good (used), Year of construction: 1982, max. wheel diameter 1250 mm max. module 16 min. module 1 hob turning speeds 25...250 1/min max. width of spur gears 1000 mm milling slide travel 1000 mm weight of the machine ca. 24,5 t Machine type: L 1202 Largest millable module: 16 / DP 1.5 Smallest millable number of teeth: see group 2.07 Largest workpiece diameter: 1250 mm / 49.213" Workpiece table diameter: 1100 mm / 43.307" Part diameter: 987 mm / 38.858" Workpiece table bore: 250 mm / 9.843" Workpiece insertion depth: 525 mm / 20.669" Min. cutter position above table: 390 mm / 15.354" Milling carriage travel: 1000 mm / 39.370" Axial feed: min.: 0.1 mm/rev / 0.0039" max.: 10.0 mm/rev / 0.3937" Radial feed adjustable: min.: 0.10 mm/min / 0.0039" max.: 10.00 mm/min / 0.3937" Milling slide rapid traverse: 800 mm/min / 31.496" Main motor rated power: 2.6 ... 16 kW Main motor speed: 300 ... 3000 min?¹ Coolant pump capacity: 200 liters / 52.835 US gal. Max. table load: 8000 kg / 17637 lbm Gisdpfx Aeynmptof Ujp Machine weight: approx. 21,000 kg / approx. 46300 lbm Milling cutter head type: 14.4500

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Gjdpfx Aex Ezyvsf Uoip Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm Gijdpsw Rf S Esfx Af Uep gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Year of construction: 2009, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC Giodpjw Rf R Uefx Af Uop max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min Gedjxylm Hepfx Af Ujip weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. Giedpfx Afjym Nfbe Ujp The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Gjdpoym Nbcefx Af Usip Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min Giedpfeymf Dajx Af Uop weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2017, Equipment: all wheel drive, And we managed to get this one as well! Beautiful, clean machine – top equipment! Liebherr L 546 Z 2plus1 Chassis No. VATZ1560CZB045370 Year of manufacture: 2017 Operating hours: approx. 11,263 4-cylinder inline engine, 120 kW / 163 HP, water-cooled with turbocharging, Emission Stage 4 Operating weight: approx. 14,300 kg Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission • Automatic climate control – maintains set temperature • 3rd and 4th hydraulic control circuit for attachments such as high-dump bucket, grapple bucket, etc. • Ride control BSS – lift arm suspension • Liebherr factory-installed central lubrication system • Fluff filter ahead of cooling pack prevents contamination • Coarse-mesh radiator for easier cleaning • Reversible fan for radiator cleaning – reverse operation • Access aid in front of windshield for easier cleaning • Air filter with “TopSpin” pre-cleaner for intake air • Premium touchscreen display • “Comfort” driver’s seat with pneumatic suspension, seat heating, and headrest • Adjustable steering column for height and tilt • Left and right armrests • Tilting window on left driver’s door • Radio • Steel headlamp bracket for front headlights instead of plastic • 4 rear LED work lights on the cab roof • 4 front LED work lights on the cab roof • 2 additional rear work lights on the engine hood • Reversing alarm (audible – beeper) can be switched off • Rear area monitoring camera • Rear tow hitch • Crane lugs front and rear on the frame • Joystick steering and conventional steering • Tyres 20.5 x 25 FA 2 x 40% tread Tyres 20.5 x 25 RA 2 x 40% tread Gsdpfeyqn Hxox Af Ueip Net price with fixed-mounted 2.8 m³ bucket: €55,900 net plus VAT Optional equipment at extra charge: - Hydraulic quick coupler: €3,550 - Grapple bucket 3 m³: €3,980 - High-volume bucket 5 m³: €3,990 - High-dump bucket from 3–5 m³: from €3,950 - Pallet fork 5 or 8 tons: from €2,190 Available with scales on request: Used scales including installation, e.g. Pfreundt WK 50 or WK 60 from €3,900 (Also available with printer) All prices net export – within Germany plus 19% VAT. We can arrange transport to your location upon request. Sale only to commercial customers or for export. Sold as-is, as seen. No warranty or guarantee. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer, and the details provided do not represent warranted characteristics. The description and information serve solely for general identification of the vehicle and do not constitute a warranty in the legal sense. The details are not guaranteed to be complete. The provided information/descriptions and images are non-binding and do not represent warranted features. Only the stipulations in the order confirmation and invoice are valid. The seller does not assume any liability or guarantee.

Condition: used, power: 190 kW (258.33 HP), Year of construction: 2013, operating hours: 16,426 h, Empty weight: 1 kg Gijdpfx Ajyn Nd Tsf Usp Please contact Emal Jaweed for more information

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 weight of the machine ca.: 14 t Gijdpfxexz Akfs Af Usp table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min *

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Giedpfjtr Nuqex Af Uep Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing * Gsdevkpu Hepfx Af Uoip

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Giodpfx Afoya Iadj Uep

Condition: good (used), power: 100 kW (135.96 HP), fuel type: diesel, Year of construction: 2014, operating hours: 13,725 h, General information Year of manufacture: 2014 Field of application: Construction Technical information Number of cylinders: 4 Gedjycl S Njpfx Af Ueip Empty weight: 23.000 kg Dimensions (LxBxH): 865 x 255 x 316 cm Functional Mast length: 9 m Condition Technical condition: good Visual appearance: good Other information Emissions class: Stage IIIA Additional information Please contact Ferdinand Pater for more information