Used Liebherr Mk 80 for sale (289)

Condition: used, Year of construction: 2007, operating hours: 14,100 h, Equipment: ABS, Scania G LTF 1045 14010 h OW 122,000 km / UW 35-meter mast very good RUST-FREE condition second owner no pending repairs major service in 12/2023 OW inspection 23.05.2024 all inspections can be newly performed at handover Wire rope from 2024 everything dry OW air conditioning UW air conditioning UW bed Ibodpfsr Icl Dox Afioc Tires 85% brakes new / clutch new / in use with us Photos are from 2024 Errors or typographical mistakes excepted.

Condition: used, Year of construction: 2015, Liebherr L 538 P 2plus1 Well equipped Excellent machine – over €25,000 invested in the past 2 years in repairs of wear parts typically needed from around 10,000 operating hours: turbocharger, particulate filter, axles. The machine was used with a large drilling rig – extensively with pallet forks for transporting drill pipes. Year of manufacture: 2015 VIN: VATZ1268PZB039964 Operating hours: 12,139 4-cylinder inline water-cooled turbocharged engine, Stage IIIB emissions, approx. 150 hp. Brakes: Self-locking of the hydrostatic drive on all 4 wheels, plus hydraulic accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits). Machine length approx. 7,200 mm Machine width: 2,500 mm Machine height: 3,280 mm Hydrostatic drive with 3-speed gearbox, max speed 40 (36 km/h) Iedpfx Afoxnvc Ijiebc • Air conditioning!!!! • Automatic central lubrication system – factory-installed by Liebherr • Rear view monitoring with camera • Ride control (boom suspension) • 3rd hydraulic control circuit for high-tip bucket, bucket with clamp, etc. • Fuel pre-filter • 'Comfort' driver's seat with pneumatic suspension (with seat heating) • Height-adjustable steering column • Bluetooth radio hands-free system • 4 work lights on cab roof front • 4 work lights on cab roof rear • Rotating beacon (warning light) rear, center cab • Automatic engine shutoff after 5 minutes at idle • Rear view camera with separate monitor in cab • Beacon (warning light) at the rear, center of the cab • Road homologation (road legal) • Tyres 20.5 x 25 L4 front axle 2 x 80% • Tyres 20.5 x 25 L4 rear axle 2 x 80% • Net price with fixed-mounted 2.5 m³ bucket: €43,500 Additional equipment available at extra cost: • Hydraulic quick coupler €3,550 • High-tip bucket from 3.0 m³ from €4,950 • Bucket with clamp for quick coupler 3.0 m³ from €3,660 • Volume bucket 4 m³ €4,500 • 4-in-1 bucket 2 m³ on request • Pallet fork 5 or 8 tonnes from €2,190 • Foam-filled tyres available on request • All prices +19% VAT or for export Sale only to traders or for export. Sold as-is, as inspected. No warranty or guarantee. The stated mileage or operating hours are read from the odometer/hour meter; we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer, and the information provided does not constitute guaranteed characteristics. The description and the information provided are solely for general identification of the vehicle and do not represent a warranty in the legal sense of a purchase. The details are not guaranteed to be complete. The information/descriptions and images are subject to change and do not constitute guaranteed properties. Only the details in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be verified separately as needed. We also accept your vehicle as trade-in. For further questions, please contact us. For our international customers …

Condition: used, Year of construction: 2018, operating hours: 2,887 h, Serial number: 9xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18268 Description: Nice 2018 Liebherr R914 with lots of equipment. It can be mentioned that it comes with Novatron GPS, engcon rototilt and 4 buckets. Gps was upgraded when the owner bought the machine. So it's approx. from 2018, the machine has previously had a drill press, so everything has been prepared for this. Service has recently been carried out and the machine is ready for use. Full history is available. Machine ready for delivery. Ibsdpfsvgyy Ssx Afijc   Specifications: - Certified until February 2025 - Registered in the machine register - Only 2887 hours - Prepared for compressor and drill - Extra hydr. - Novatron 3D GPS, upgraded version - Good undercarriage - Lots of extra light around the machine - 2 pcs. cleaning buckets - Grave bucket - Narrow bucket - Cutter - 90 kw - 6.8 km/h - Reversing camera - Central grease - 18100 kg - 60 fasteners - Engcon rototilt - 60 belts - Total width 260 cm - Webasto - Service performed - Machine ready for delivery Hours: 2887 Total Weight: 18100 Year controlled: Yes Year controlled until: 02.25 Width: 260 Kw: 90

Condition: used, Year of construction: 1994, Wheel loader 541 in very good condition Optically and technically Ibedpfx Aeufw Apsfijc With few operating hours approx. 8700 hours No oil loss Everything works Including transportation throughout Germany Errors excepted Pictures/text may vary

Condition: used, Year of construction: 2006, operating hours: 12,720 h, 2006 | Liebherr L 538 | Used Wheel Loader | 12720 hours 📍Location: France, La Chapelle-de-Guinchay 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 28300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 39 approved ✅ 15 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good mechanical and operating condition, with numerous oxidized areas but no destructive corrosion. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "36265 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Iedjxlvlkjpfx Afiebc 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Airco back drive camera tyres: 26.5R25 approx 60-70% good bucket with edge engine with 200kW CE / EPA operation weight: 27.5to. Ibsdpfsxnmz Iox Afiec

Condition: used, functionality: fully functional, mileage: 178,419 km, fuel type: diesel, overall weight: 50,000 kg, first registration: 03/2011, Year of construction: 2011, operating hours: 5,953 h, machine/vehicle number: IF75RFR, Equipment: ABS, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, crane, onboard computer, parking heater, traction control, trailer coupling, Liebherr Crane - Model LTM 1050-3.1 Application: construction Iedpfexnkc Nsx Afiebc Drive: wheels Own weight: 39,500 kg Lifting capacity: 50,000 kg

Condition: used, Year of construction: 2006, Liebherr 524 Chassis number: VATZ0438KZB014700 Z-kinematics lift frame Year of manufacture: 2006 Liebherr 4-cylinder inline engine, water-cooled with turbocharging and intercooler, 86 kW / 118 hp Version: 33 km/h – hydrostatic drive with 2-speed travel transmission * Central lubrication system * Air conditioning * 2 additional work lights on cab roof front Ijdpfjxnvc Ujx Afisbc * 2 additional work lights on cab roof rear * Rotating beacon on cab roof rear (flashing light) * 2 crane eyes front on frame * 2 crane eyes rear * Road homologation Brakes: Automatic braking action of the hydrostatic drive acting on all 4 wheels and, additionally, hydraulic pump-accumulator brake system with wet-disc brakes in the axle differential (two independent brake circuits) Machine width: 2,500 mm * Tyres 17.5 x 25 front axle 2 x 50% * Tyres 17.5 x 25 rear axle 2 x 50% Automatic self-locking differentials, 45% locking rate on both axles Purchase price with standard bucket fixed-mount: €26,900 net. Export? For domestic sales, plus 19% VAT Optional equipment at additional cost: · Hydraulic quick coupler: €3,550 * High-tip bucket from 3.0 cbm: from €4,950 * Bucket with clamp for quick coupler, 3.0 cubic meters: from €3,660 * High-volume bucket 4 cubic meters: €4,500 * 4-in-1 bucket, 2 cubic meters: on request * Pallet forks, 5 or 8 tons: from €2,190 All prices are net plus 19% VAT. Viewing by appointment! Sale only to businesses or for export. Sold as is, as seen. No warranty or guarantee. Stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided should not be regarded as warranted characteristics. The description and information provided serve only for general vehicle identification and do not constitute a warranty as defined by sales law. The information does not claim to be complete. The details, descriptions, and images are non-binding and do not constitute guaranteed features. Only the specifications in the order confirmation and invoice are binding. The seller does not accept any liability or warranty. The advert may contain errors in typing or data transmission. The seller has not inspected the machine. Equipment should be checked separately if necessary. We are also happy to take your vehicle in trade-in. Please contact us with any further questions. For our international customers, we provide all customs and export documents for smooth export handling.

Condition: used, Year of construction: 1971, Pfauter gear - gear hobbing machine vertical P400 Gear milling machine Manufacturer: Pfauter Germany Model: P 400 Year of manufacture: 1971 Control type: conventional Wheel diameter - max.: 400 mm Wheel width: 290 mm Module - max.: 6 Module - min.: 0.5 Ibsdpfx Asvwcb Tofisc Voltage: 220/380 V Frequency: 50 Hz Dimensions approx.: 2400 x 1650 x 2400 mm Total power requirement: 20kvA The machine is in a well-maintained original condition. The complete, detailed documentation is available. Inspections under power can be carried out at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, - Hook height: 23.8 m Iodexm S Evspfx Afiebc - Jib length: 40 m - Including ballast Very good condition, as it has seen little use.

Condition: used, Year of construction: 2014, operating hours: 6,755 h, 2014 | Liebherr Pr 724 Lgp | Used Tracked Dozer | 6755 hours 📍Location: France, Naves 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 99700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 51 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine was working at time of inspection except as noted Ibjdexk T Srepfx Afioc 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "29879 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 133,328 km, power: 170 kW (231.14 HP), gearing type: automatic, fuel type: diesel, Year of construction: 1993, operating hours: 24,394 h, Empty weight: 22.840 kg Carrying capacity: 25.000 kg Ibsdsxmh Akopfx Afisc GVW: 24.000 kg Boom radius: 26 m Auction item. Crane is in working condition. The maximum length of the boom is 26m.

Condition: used, mileage: 78,500 km, power: 270 kW (367.10 HP), overall weight: 40,000 kg, fuel type: diesel, color: red, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, first registration: 07/2003, next inspection (TÜV): 06/2026, Equipment: ABS, crane, I am offering our Liebherr LTM 1060 here. The crane is in very well-maintained condition as it has always been stored indoors. All maintenance has been carried out regularly. * Operating hours: 19,464 * Tyre size: 16.00R25 * Suspension: hydraulic * Differential lock Iodpfx Asxl Nkajfisbc * Axle load: 12,000 kg * Max. lifting capacity: 60 tonnes * Automatic transmission with retarder * This is a German crane Get in and start working. Errors and misprints excepted.

Condition: used, operating hours: 6,077 h, Equipment: soot filter, According to our "General Terms and Conditions" and without any warranty or guarantee, we are pleased to offer you the following vehicle today. This offer is non-binding until completion and subject to errors, misprints, and prior sale: Ibjdpexl Ixijfx Afiec Liebherr LRS 645 Container Loader Year of manufacture: 2010 6-cylinder diesel engine Displacement: 10,500 cc 270 kW / 367 hp 6,076.8 operating hours 2,627.3 driving hours 9,067 km Unladen weight: 71 t Lifting capacity during travel: 43 tonnes, lifting capacity with hydraulic stabilizers deployed and stationary: 45 tonnes Spreader suitable for 20", 30", 40" and 45" containers Diesel tank capacity: 600 liters Hydraulic oil reservoir: 900 l Steering axle track width: 3,313 mm Drive axle track width: 4,231 mm Front hydraulic stabilizers Central lubrication system Servo-assisted mast rotation Hydraulically extendable loading mouth 2 drive motors; drive motor on operator side replaced new in 2024 Rear-view camera Various work lights 2 x revolving beacon lights (rear) Tow hook (rear) 2 x reversing lights Hydraulic rear steering 2 x rubber buffer pads (front) Tyres: 18.00-25 Bridgestone, 40 PLY Rating Tubeless, Extra Tread Tube tires, front with dual tires approx. 70%, rear with single tires approx. 80% Full cab with air conditioning Radio / CD Grid roof Roller blind Cab extendable to front edge Maximum height: 19,250 mm Maximum lifting height (spreader): 16,190 mm Maximum reach: 18,900 mm Minimum reach (at max lifting height): 13,000 mm Wheelbase: 6,500 mm Overall length: 9,200 mm Price: €160,000 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. For disputes up to a value of €50,000, jurisdiction lies with the District Court of Ludwigslust, and for values exceeding this, with the Regional Court of Schwerin. Subject to errors, misprints, and prior sale.

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm Isdsw Rf S Espfx Afijbc gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2017, operating hours: 13,450 h, LIEBHERR LH40M. Year: 201. Hours: 13,450. Four grapples. Solid tires. Hydraulic cabin. 9.10 m industrial boom. 7.50 m industrial stick. CE certificate. Very good condition. Ibsdpexl E Afefx Afiec

Condition: used, Year of construction: 2015, operating hours: 8,571 h, 2015 | Liebherr A 912 | Used Wheeled Excavator | 8571 hours Iedpoxg Rylefx Afiobc 📍Location: Switzerland, Wallisellen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 56000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 52 approved ✅ 6 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good operating excavator, when pulling the stick in you feel a stuck point after that it goes in smooth, small window broken , tiltcoupler cracked needs attencion 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39647 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 95 kW (129.16 HP), fuel type: diesel, Year of construction: 2007, operating hours: 13,800 h, Drive: Wheel Ijdpfx Asxmhpdjfisbc Empty weight: 18.000 kg Auction item. Excavator in working condition. Key is broken, starts with a screwdriver. One cylinder of the blade leaks oil. Worn out pump, efficiency at high load about 90%. There may be more defects because it has not been used for a while.

Condition: excellent (used), power: 215 kW (292.32 HP), operation weight: 29,000 kg, Year of construction: 2019, operating hours: 12,535 h, Equipment: air conditioning, Liebherr L576 X Power Year: 2019 Operation hours: 12.535 Hrs ROPS Ijdpfx Aexl Dq Isfiebc Airco Radio Joy-stick steering and full steering wheel Central lubrication Back drive camera Michelin Tyres: 26.5R25 approx 40% good Bucket with 4.7 cbm engine with 215kW CE / EPA Operation weight: 29to.

Condition: used, Year of construction: 2012, operating hours: 5,626 h, New arrival!! Liebherr L 514 P (Parallel lift frame) Stereo loader (articulated steering + rear axle steering – extremely maneuverable!!!) Last model year without particle filter and AdBlue!!! Chassis number: VATZ1115AZB 031099 Operating hours (according to meter): 5,626 Power: 72 kW (98 hp) Total weight: 10,500 kg Own weight: 9,000 kg * Hydraulic circuit for high-tip bucket, grab bucket, clamshell bucket, snowplow * Automatic central lubrication system * 2 work lights at the front of the cab roof * 2 work lights at the rear of the roof * Comfort seat with suspension * Adjustable steering column * Radio pre-installation * Engine air intake with pre-separator (TOP-AIR) * Rotating beacon (warning light) at the rear, center of the cab * Rear view camera with separate monitor * Main electric switch Hydrostatic drive with 2 travel speeds Tires: Front axle: 17.5 R 25, 20% good Rear axle: 17.5 R 25, 40% good Width: 2,400 mm Various buckets for this machine in stock Available at extra cost: Clamshell bucket, 2.0 m³ from €3,250,- High-tip bucket, 2.0 – 2.5 m³ from €3,950,- Volume bucket, 3.0 m³ No. 59 – €2,950,- Screening/mixing bucket Pallet fork, 5 ton, from €2,190,- Other equipment available on request!!! Ibodpfx Aoxlw Imofioc All prices are net ex stock + 19% VAT or for export! We can gladly arrange transport to your location. Sale only to businesses or export. Sale as-is, where-is, as seen. No warranty or guarantee. Indicated mileage and operating hours are read from the respective odometer/hour meter; we do not guarantee or warrant their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer, and the details provided are not to be considered as guaranteed features. The description and details serve only for the general identification of the vehicle and do not represent a warranty under sales law. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the stipulations in the order confirmation and invoice apply. The seller accepts no liability/warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. Trade-ins are welcome. For further questions, feel free to contact us. We prepare all customs and export documents for our customers abroad for smooth export processing.

Condition: used, Year of construction: 2003, max. wheel diameter 600 mm gear width 92 mm Iedpfx Asvzhflefijbc max. module 8 mm max. ram stroke 100 mm table diameter 400 mm workpiece dia. 600 mm Shockable standard module max. 8 mm angle adjustable from - to -0,5 / +0,5 Grad stroke range 80 - 1200 Hübe/min feed radial axis machine column 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 12,845 h, LIEBHERR LH30M. Year: 2018. Hours: 12,840. Four grapples. Solid tires. Hydraulic cabin. Industrial boom. Industrial stick with cylinder. With front grill. Very good condition. Ibedpfx Afoxl Ex Tjijc

Condition: used, Year of construction: 2008, operating hours: 10,584 h, 2008 | Liebherr R 944 C V Litronic with long demolition boom (21m), variable-angle boom and 2 buckets | Used Demolition Excavator | 10584 hours Isdpfxsxgymho Afiebc 📍Location: France, Rœulx 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 100000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 52 approved ✅ 11 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine started and ran during the inspection but had some oil leaks. It is equipped with 21 meter reach long demolition boom and a variable angle earth digging has a tilt cab, a Tractorhin TP boom attachment, a Liebherr bucket, and a hydraulic point will be made. The hydraulic oil level is very low, and there is a leakage on the pump. Some play is present on the boom, bucket, and slew ring. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38788 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), functionality: fully functional, overall weight: 38,500 kg, Year of construction: 2017, operating hours: 13,326 h, Equipment: quick-change device, Liebherr R946 NLC ZSA/Additional Hydraulics/Air Conditioning/Oilquick OQ80 • Manufacturer: Liebherr • Model: R946 NLC • Year of manufacture: 2017 • Operating hours: 13,326 h Ibedpfx Afow Rccusisc • Weight: 38,500 kg • Power: 220 kW / 300 HP • Engine: Liebherr D936A7 6-cylinder • Emission standard: Stage IV / Tier 4f • Fast and slow travel speeds • Mono boom • Central lubrication system • Demolition guard cabin • 360° camera view with Skyview • 85% undercarriage condition • Air conditioning • Heated seat • AdBlue • German machine • Immediately available for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and typos excepted. - Sale according to our terms and conditions.

Condition: used, Year of construction: 2010, operating hours: 8,000 h, New arrival Well-maintained machine Liebherr L 514 Z Stereo Stereo Loader (articulated steering + rear axle steering – extremely maneuverable!!!) Year of manufacture: 2010 Original operating hours: 8,000 Chassis number: VATZ 1115CZB025518 Tyres: 17.5 x 25, 40% tread (with nails + screws, but airtight!) Iedpfexlmfbjx Afijbc Power: 72 kW / 98 HP Total weight: 10,500 kg Air conditioning 3rd hydraulic circuit for auxiliary equipment such as high-tip bucket, bucket with grapple, silage block cutter, etc. 2 working lights mounted at the front of the cab roof Battery isolator switch Comfortable air-suspension driver seat Flashing beacon on top rear of cab Road-legal Hydrostatic drive with 2-speed transmission Width: 2,400 mm Net price with hydraulic quick coupler and 1.6 m³ bucket: €39,500 Additional equipment available at extra cost: 5-ton pallet fork from €2,190 High-tip bucket from €3,250 High-capacity bucket All prices are net ex works plus 19% VAT or for export! We can gladly offer you transport to your location. Sale only to businesses or for export. Sold as-is, as seen. No warranty or guarantee. The indicated mileage / operating hours are those read from the odometer / hour meter. No guarantee is provided for their accuracy. Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided should not be regarded as guaranteed features. The description and details provided are for general identification only and do not represent legal guarantees under sales law. No claim to completeness is made. All specifications, descriptions, and pictures are non-binding and do not constitute guaranteed features. Only the terms set in the order confirmation and invoice are binding. The seller assumes no liability or warranty. This advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment details may need to be checked separately. We are happy to accept your vehicle as a trade-in. Please feel free to contact us for further questions. For our international customers, we prepare all customs and export documents for smooth overseas delivery.