Used Large Kitchen Appliances for sale (7,979)

Condition: used, maximum load weight: 32,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 30, Code L4BH, Chemical First registration 01/2023 German registration, from first owner Mileage only 207,939 km Approximate unladen weight 6,910 kg Stainless steel chassis, highly polished BPW axles with large disc brakes, 430 mm 1st axle: lift axle Crank-operated support legs, steel, full-load capacity 6 tires, size 385/65 R 22.5, tread depth 70 to 80% Aluminum rims KNORR trailer EBS Tank: 30,000 liters, made of stainless steel 1.4571 AISI 316 Ti Operating pressure: 3.0 bar / Test pressure: 4.0 bar Godpfx Ajzkybmsgrskd Insulation: 100 mm glass wool 1 compartment with 3 bulkheads 4 domed manholes DN500 1 ventilation valve, Fort Vale 1 safety valve 1 check valve Air line on the right side, DN 50, with TW 50 connection at the front right Heating preparation: 4-channel hot water 1 outlet in DN 100, uninsulated, with sampling valve at the rear right and TW 80 coupling 1 emptying device Pneumatic bottom valve Hoses on the left and right, DN 150, approx. 6 m long RENTING is the new BUYING; with us, it is also available as a full-service rental.

Condition: used, axle configuration: 3 axles, first registration: 02/2018, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6717 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year of manufacture: 2018, Customs seal, Sliding roof, Axle type: KRONE, Spare wheel, Tread depth of spare wheel: 10%, = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 11 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Weights Tare weight: 6,717 kg Payload: 32,283 kg GVW: 39,000 kg Gedpeywr A Eefx Agrskd Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2016, operating hours: 3,547 h, fuel type: electric, color: red, mileage: 3,547 km, first registration: 08/2016, gearing type: other, suspension: other, driver cabin: other, emission class: none, fuel: electricity, For sale is a BT LPE 200/8 in red, first registered in August 2016. With only 1,728 km on the odometer, the vehicle is in very good, Gkjdpfx Agezvhyhorod well-maintained condition and is ready for immediate use. The BT LPE 200/8 impresses with its reliable technology and easy operation – ideal for warehouses, industrial facilities, or logistics companies. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2016, operating hours: 2,511 h, fuel type: electric, color: red, mileage: 2,511 km, first registration: 08/2016, gearing type: other, suspension: other, driver cabin: other, emission class: none, fuel: electricity, For sale is a BT LPE 200/8 in red, first registered in August 2016. With 2,540 km on the odometer, the vehicle is in very good, well-maintained condition and is ready for immediate use. The BT LPE 200/8 impresses with its reliable technology and easy Gkedpfx Aezvhynjgrjd operation – ideal for warehouses, industrial facilities, or logistics companies. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2016, operating hours: 12,452 h, overall weight: 1,330 kg, fuel type: electric, color: red, mileage: 12,452 km, first registration: 12/2016, empty load weight: 700 kg, maximum load weight: 150 kg, gearing type: other, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The Linde P 60 Z tractor is an efficient 3-wheel electric vehicle, ideal for industrial use and transport tasks. First registered on December 20, 2016, it has a moderate mileage of 12,452 km and 12,452 operating hours. The red tractor has a permissible total weight of 1,330 kg and is in a used, but well-preserved condition. The tractor uses a 48V battery, but no charger is included in the delivery. A registration service and optional delivery within Germany are offered to interested parties. Viewings are possible Monday to Friday from 8:00 a.m. to 5:00 p.m. and Saturdays from 9:00 a.m. to 2:00 p.m. Overall, the Linde P 60 Z Gjdpfx Agjr Uzifjrskd tractor is a reliable option for a wide range of transport requirements. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, Year of construction: 2015, operating hours: 10,636 h, overall weight: 1,330 kg, fuel type: electric, color: red, mileage: 10,636 km, first registration: 11/2015, empty load weight: 700 kg, maximum load weight: 150 kg, gearing type: other, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The Linde P 60 Z tow tractor is a powerful three-wheeled electric vehicle designed for efficient towing tasks in industrial environments. First registered on 23 November 2015, this used vehicle has accumulated 10,636 operating hours or kilometers to date. Its striking red design and robust technical specifications make this model stand out. The tractor features a single seat, making it ideal for individual tasks in the logistics and transport sector. Its electric drive ensures environmentally friendly and cost-effective operation. The permissible total weight is 1,330 kg, allowing for solid transport operations. Gksdpfx Aswu Ig Uegrod An inspection can be carried out without prior appointment. Further information and contact details can be found on the specified website. Sale to businesses only (agriculture, freelancers, small and large enterprises) or export. Errors and prior sale excepted.

Condition: used, Year of construction: 2016, operating hours: 11,932 h, overall weight: 1,330 kg, fuel type: electric, color: red, mileage: 11,932 km, first registration: 12/2016, empty load weight: 700 kg, maximum load weight: 150 kg, gearing type: other, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The Linde P 60 Z tractor is a used, electrically powered three-wheel tractor, first registered on December 20, 2016. With a mileage of 11,932 kilometers and operating hours, the vehicle has a robust record of use. The red paintwork is striking and the machine has space for a driver. The tractor is powered by a 48V battery of type 3 EPZV 300, although a charger is not included in the scope of delivery. With a permissible total weight of 1,330 kg, the Linde P 60 Z can be used flexibly in various areas of application. It was previously used by a single owner and is now aimed primarily at commercial buyers or the export market. Interested parties can view the tractor without prior appointment from Monday to Saturday in Rohrbach (Palatinate). The seller also offers registration services and options for delivery within Germany for an additional charge. Godper Uzixjfx Agrekd Sale only to traders (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, Year of construction: 2014, operating hours: 2,968 h, overall weight: 3,281 kg, fuel type: electric, color: yellow, power: 20 kW (27.19 HP), total length: 3,930 mm, mileage: 2,968 km, first registration: 12/2014, empty load weight: 2,380 kg, maximum load weight: 2,000 kg, gearing type: other, suspension: other, driver cabin: other, construction height: 2,400 mm, emission class: none, fuel: electricity, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Specialty vehicles - Fleets Other: - Various loading options - Registration service - Delivery within Germany possible for an additional charge Viewings are also possible without prior appointment: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Gedpfx Aowbammsgrekd Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: Email: Further information can be found at We speak German / English / Russian / Italian / French / Spain More Information Sales only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, Year of construction: 2014, operating hours: 1,851 h, overall weight: 3,140 kg, fuel type: electric, color: red, total length: 2,580 mm, mileage: 1,851 km, first registration: 11/2014, empty load weight: 2,360 kg, maximum load weight: 1,500 kg, gearing type: automatic, suspension: other, tire size: 18X7-8, number of seats: 1, driver cabin: other, lifting height: 3,010 mm, construction height: 2,060 mm, emission class: none, fuel: electricity, load capacity: 1,500 kg, The Toyota 7FBEST 15 electric 3-wheel forklift is a reliable used vehicle, ideal for commercial applications such as agriculture, freelance work, or large-scale operations. First registered in November 2014 and with 1,851 operating hours, it offers solid performance. The electric drive ensures environmentally friendly operation, while the automatic transmission allows for easy operation. Gedpfxor Uzrks Agrjkd This bright red vehicle has a gross vehicle weight of 3,140 kg and a compact design with a height of 2,055 mm, a width of 990 mm, and a length of 2,580 mm. The forklift is designed to offer maneuverability and precision in confined spaces, making it particularly suitable for internal transport tasks. This reliable forklift offers plenty of potential for future applications thanks to its low mileage and solid construction. Viewings are available Monday to Saturday. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, Year of construction: 2018, operating hours: 115 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, gearing type: automatic, color: red, mileage: 115 km, first registration: 09/2018, suspension: other, driver cabin: other, emission class: none, fuel: electricity, For sale is a BT SWE 080L electric stacker with automatic transmission, first registered in 09/2018, and only 115 operating hours. The machine is robust, reliable, and immediately ready for use—ideal for warehouses, production facilities, or company yards. The BT SWE 080L impresses with its easy handling, precise control, and comfortable operation. The automatic transmission ensures simple operation and efficient work, even in narrow aisles. As an electric stacker, the BT SWE 080L operates emission-free, quietly, and reliably. Its durable construction and high-quality BT technology guarantee a long service life and high operational safety. Godpfx Agjxmt Iljrokd This BT SWE 080L electric stacker is the perfect solution for companies seeking reliable, high-performance, and low-maintenance material handling equipment. Whether for storage and retrieval, pallet transportation, or material handling—the stacker supports your operation efficiently and safely in any task. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, axle configuration: 3 axles, first registration: 08/2011, loading space length: 7,500 mm, loading space width: 2,430 mm, loading space height: 1,450 mm, total length: 8,900 mm, total width: 2,500 mm, total height: 3,100 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 3, Tare weight: 5100 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2011, Body material: Aluminum, Side wall material: Aluminum, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 25, Drum volume in: m3, Axle type: SCHMITZ, Aluminum box, 24m3, Okuslide inside, roll cover, platform = Additional information = General information Gjdoz D Al Eopfx Agrjkd Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 15 mm; Tire tread depth right: 14 mm Axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 7 mm Axle 3: Tire tread depth left: 11 mm; Tire tread depth right: 12 mm Weights Tare weight: 5,100 kg Payload: 33,900 kg GVWR: 39,000 kg Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is handled quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 09/2016, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 445/45R19,5, wheelbase: 8,960 mm, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Payload: 31800 kg, Tare weight: 7200 kg, Gross weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2016, Lifting roof, Sliding roof, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: OP-55-KX Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 445/45R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 3: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Weights Unladen weight: 7,200 kg Payload: 31,800 kg GVW: 39,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers Gkedpfx Ajzvvacogred • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: a Merlo ROTO 38.16 rotating telescopic handler from 2012, with 4050 operating hours. The machine is equipped with a rotating turret, a telescopic boom, four-wheel drive, and hydraulic stabilizers. Thanks to its large working range and rotating design, it is ideally suited for construction, assembly, industrial, and loading/unloading operations. Technical data: Manufacturer: Merlo Model: ROTO 38.16 Year of manufacture: 2012 Operating hours: 4050 hours Maximum nominal lifting capacity: 3800 kg Maximum lifting height: approximately 16 m Drive: 4x4 Type of machine: rotating telescopic handler Engine: Perkins diesel Cabin: enclosed, glazed Controls: joystick Stabilizers: 4 hydraulic stabilizers Equipment: Telescopic boom Rotating turret Pallet forks Four hydraulic stabilizers Merlo control panel Gkedpe Aibblsfx Agrjd Joystick for operating functions Operator cabin Work lights Technical and visual condition: The machine is used and has normal signs of wear and tear appropriate for its age and use. The telescopic boom, hydraulic stabilizers, and forks are shown in the pictures. The machine is sold with the equipment shown in the photographs.

Condition: new, Year of construction: 2019, functionality: unexamined, WILO EMU FA 10.62E SUBMERSIBLE SEWAGE PUMP – 5 kW 400 V ATEX WILO EMU FA 10.62E – PROFESSIONAL SEWAGE PUMP FOR PUMP STATIONS AND SEWERAGE SYSTEMS For sale is an original WILO EMU FA 10.62E submersible sewage pump with an FK17.1-4/12KEx motor, 5 kW power, and 400 V three-phase power supply. This is an industrial sewage pump designed for the transport of municipal and industrial wastewater, as well as contaminated liquids, in appropriately designed installations. The pump from the German manufacturer WILO belongs to the professional EMU FA series, used in water and sewage installations, sewage pumping stations, and wastewater treatment plants. Key parameters: • Manufacturer: WILO – Made in Germany • Model: EMU FA 10.62E • Motor power: 5 kW / 5000 W • Supply voltage: 400 V, three-phase • Nominal flow rate: 115.6 m³/h – 115,600 l/h • Nominal head: 9.1 m • Year of manufacture: 2019 • Protection class: IP68 • Motor design: Ex / ATEX POWERFUL SUBMERSIBLE SEWAGE PUMP – KEY FEATURES HIGH EFFICIENCY – 115,600 L/H The pump’s nominal flow rate is 115.6 m³/h. The unit is designed for transporting large volumes of wastewater in professional pumping systems. 5 KW / 400 V INDUSTRIAL MOTOR Three-phase WILO FK17.1-4/12KEx motor with a rated power of 5 kW, designed for operation in industrial installations. IP68 SUBMERSIBLE PUMP Design intended for submerged operation. The maximum immersion depth according to the nameplate is 20 m. EX / ATEX EXPLOSION-PROOF DESIGN The pump is equipped with a motor with a factory Ex marking. Use in explosion-hazard areas requires the specific installation to comply with the manufacturer’s documentation and applicable requirements. ROBUST HYDRAULICS FOR WASTEWATER Centrifugal pump with hydraulics designed for transporting wastewater and liquids containing contaminants. According to the FA 10.62E series documentation, a single-channel impeller is used. TECHNICAL DATA – WILO EMU FA 10.62E Parameter Value Brand WILO Series EMU FA Gedpfe Aibg Rsx Agrjkd Model FA 10.62E Motor type FK17.1-4/12KEx Type Submersible sewage pump Rated power P2 5.00 kW Power supply 3 × 400 V Frequency 50 Hz Rated current 10.80 A Motor speed 1400 rpm Nominal flow rate 115.6 m³/h Nominal head 9.1 m Protection class IP68 Operating mode S1 Maximum medium temperature 40°C Maximum immersion depth 20 m Impeller diameter 220 mm Design Ex / ATEX Year of manufacture 2019 Country of manufacture Germany The stated flow rate and head values refer to the pump’s nominal operating point.

Condition: good (used), Year of manufacture: 2022 GVW: 3.000 kg Technical condition: good Visual appearance: good Production country: DE Please contact Christian Theißen for more information Manufacturer: Wörmann Model: ADP N2B2X Year of build: 2022 Condition: Used Gksdps Aifipsfx Agred Data: First registration: 22.02.2022 Design type: Tandem 2-Axle Trailer Dimensions box body LxWxH: 6090 x 2480 x 2230 mm Power supply: 12V via battery and battery charger Weight: 3,0 t Special features: Equipment: Treatment Room 1: foldable padded bench, sideboard with cabinets, air conditioning, foldable changing table, sink, LED lighting, independent operation possible, rear door with ramp and surrounding lights, fly rails in the floor for securing stretchers, curtain for partitioning, wardrobe, passage door to lounge, 1 insulated sliding exterior window. Equipment: Lounge 2: 2 padded benches with dining table, wardrobe cabinet, space for radios, ceramic cooktop, refrigerator, sink, 2 insulated sliding exterior windows, exterior doors with large canopy. Location: 41468 Neuss Available immediately

Condition: excellent (used), Year of construction: 2015, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, ARKU EdgeRacer ER 1500 D – Double-Sided Deburring and Edge Rounding Machine The ARKU EdgeRacer ER 1500 D is a high-performance industrial machine designed for automatic deburring and edge rounding of sheet metal components. Working width 1300 mm Thickness minimum 0,8 mm Thickness maximum 100 mm The machine processes both the upper and lower sides of metal parts simultaneously in a single pass, significantly reducing production time and manual finishing work. What is this machine used for? Removing sharp edges and burrs from laser-cut, plasma-cut and punched metal parts. Rounding internal and external edges for improved safety and surface quality. Preparing sheet metal components for painting, powder coating and further processing. Improving edge quality for welding and assembly. Processing steel, stainless steel and aluminium components. Finishing complex sheet metal parts with holes, slots and internal contours. Who is this machine interesting for? Laser cutting companies – Finishing laser-cut sheet metal parts quickly and efficiently. Sheet metal fabrication companies – Automatic deburring and edge rounding in production. Gksdo Aigigspfx Agrsd Steel service centres – Processing large quantities of cut metal components. Stainless steel manufacturers – Producing smooth, safe edges on stainless steel parts. Automotive suppliers – Finishing precision sheet metal components. Machine builders – Preparing metal parts for assembly, welding and coating. Electrical cabinet manufacturers – Removing sharp edges from panels and enclosures. Subcontractors – Providing professional deburring services to industrial customers. Main advantages The major advantage of the EdgeRacer ER 1500 D is its double-sided processing technology. Unlike conventional deburring machines, which often require components to be turned over and processed twice, the EdgeRacer finishes both sides in one operation. With a working width of 1,500 mm, the machine is particularly interesting for companies processing medium to large sheet metal components. Typical industries: Sheet metal fabrication, laser cutting, automotive, machinery manufacturing, metal construction, stainless steel processing and industrial subcontracting. Conclusion: The ARKU EdgeRacer ER 1500 D is especially attractive for professional sheet metal manufacturers looking to reduce manual labour, increase production capacity and achieve consistent, high-quality edge rounding on both sides of their components. Length:2300mm Width:2600mm Height:2500mm Weight:4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Round stock milling machine, manufacturer Stellmacher, type RST310/3-3 SE, for producing cylindrical milled wood with diameters from 150 to 310 mm, with an electric drive of 45 kW for the milling head. The feed rate is adjustable from 1 to 12. Two roller conveyors on wheels are used for feeding and removing the wood. Gjdpjy Ta Ibsfx Agrokd This machine, with its large diameter range, is a particularly rare find as a used machine.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,855 kg, empty load weight: 2,145 kg, loading space volume: 17.3 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,250 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible! 4 units available in the short term; other RAL colors available on request. Gedpfx Ao Aifbpjgrskd Technical description: • Internal dimensions: 6000 x 2300 x 1250 mm • Usable volume: 17.3 cbm • Tare weight: 2145 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double-wing door with safety lock • Container tested and approved according to DGUV Regulation 114-010 • Warning markings according to DIN 67520 • Standard ladder, screwed on, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Upper frame, round tube Ø 89 mm • Mesh hooks • All moving parts greaseable • Steel rollers 159×6.3, length 300 mm • Zinc phosphate primer inside and out, painted on the outside with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg • Container, storage container, roll-off container, hook lift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit including 19% VAT.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,380 kg, empty load weight: 2,620 kg, loading space volume: 31.1 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 2,250 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase possible. 3 units available in the short term, other RAL colors available on request. Other designs and sizes available ex warehouse Paderborn. You can view our current stock on our website. Technical description: • Internal dimensions: 6000 x 2300 x 2250 mm • Usable volume: 31.1 cbm • Tare weight: 2620 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double-wing door with safety lock • Container tested and approved according to DGUV rule 114-010 Godpfxj Aifb Te Agrokd • Standard ladder, bolted, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Top frame: round tube ∅ 89 mm • Mesh hooks • All moving parts lubricated • Steel discharge rollers 159 x 6.3, length 300 mm • Inside and outside with zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg • Container, storage container, roll-off container, hook lift container, large-volume container Errors and prior sale excepted. Photos are for illustrative purposes only! For further questions, please send us a message or call us.

Condition: used, GVW: 3.000 kg Production country: DE Please contact Christian Theißen for more information Manufacturer: Wörmann Model: Ambulance 3060/240 Year of build: 0 Condition: New Data: Design type: Tandem 2 axle trailer Weight: 3,0 t Gksdpfxs Aif Hws Agrsd Dimensions box body LxWxH: 6090 x 2480x 2230 mm Power supply: Battery Special features: Equipment: Treatment room Padded bench Foldable padded bench Sideboard with cupboards Air conditioning Folding changing table Sink LED lighting (autonomous operation possible) Rear door Access ramp and ambient lighting Exterior door with canopy Fly rails in the floor for attaching stretchers Curtain for dividing wardrobe Passage door to the lounge 1 insulated sliding exterior window Facilities: Lounge 2 padded benches Dining table Cloakroom cupboard Space for radios Ceramic hob Refrigerator Sink External door with large canopy 2 insulated sliding external windows AVAILABLE by arrangement Price on demand Information: sample images

Condition: new, overall weight: 3,500 kg, suspension: other, color: white, gearing type: mechanical, Partition wall, 3 horses, folding bed, 1 sleeping place, rear ramp, tack room, saddle and bridle holder, aluminum floor, rubber floor, window in the horse compartment, openable windows in the horse compartment, roof hatches, roof ventilator, passage from the horse compartment to the tack room, new partition wall system with locking at the top and bottom, insulated roof, sandwich construction, large aluminum rims, larger standing area for horses, permissible total weight 3,500 kg, metallic surcharge €1,000.00 net. FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE, THE PRICE COMES SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, TRADE-IN OR LOAN FOR YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE!All information without guarantee* You can find more offers on our homepage: The description and data provided do not constitute a guarantee and are not binding. The purchase contract that is concluded in the car dealership when purchasing the vehicle is binding. Errors and prior sale reserved! Gkedpfx Ajl Tlh Iegred

Condition: used, mileage: 194,000 km, power: 294 kW (399.73 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, color: silver, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 5, Equipment: air conditioning, bathroom, trailer coupling, Topsleeper, roof hatch, green environmental badge (4), reversing camera, TV, new roadworthiness/emissions inspection (HU/AU), automatic transmission, diesel, Euro 5, green environmental badge, full air suspension, large and small trailer hitch, air conditioning, reversing camera, surveillance camera in the horse compartment, 5 registered seats, through passage, separate entrance, 5-6 sleeping places, topsleeper, large bed, TV, seating area, storage cupboards, refrigerator with freezer, microwave, sink, toilet, shower, washbasin, separate groom's apartment, rear and side ramp, roof hatches, windows in horse compartment, tilt windows, ramp limiter, external tack room, horse shower, permissible total weight 26,000 kg. FOR US, CONDITION AND GUT FEELING ARE CRUCIAL, PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the following number. *TRADE-IN, ACCEPTANCE OR FINANCING OF YOUR VEHICLE, AS WELL AS FINANCING, POSSIBLE! All information given without guarantee. More offers available on our homepage. The description and specified data do not constitute a warranty and are not binding. The only binding agreement is the purchase contract concluded at the dealership when buying the vehicle. Errors and prior sale excepted! Gksdsviczdepfx Agrod

Condition: good (used), mileage: 128,031 km, power: 375 kW (509.86 HP), first registration: 04/2025, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,050 mm, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, tachograph, traction control, - 2. Diesel tank - Heated mirrors - CarPlay - Digital tachograph - Fixed - Globetrotter - LED lamp - Manual - Radio/cassette - Rear view camera - Skai - Lane keeping assist - Blind spot sensor Number of axles: 3, Configuration: 6x2, Unladen weight: 8554 kg, Gross vehicle weight: 24000 kg, Total tank capacity: 615 liters, 2. Diesel tank, Height of fifth wheel coupling: 114 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pull force: 380 tons, Suspension type: Air suspension, Cabin type: Globetrotter, Cruise control, Tachograph (driver's card), Digital tachograph, Air conditioning, Stationary air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, Color: White, Heated mirrors, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 375 kW (503 hp), Engine capacity: 12777 cc, Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Skai, Seat adjustment: Manual Transmission Transmission: VOL, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 315/70R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 8 mm; Suspension: Leaf suspension Axle 2: Tire size: 245/70R17.5; Lift axle; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm; Suspension: Air suspension Axle 3: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 10 mm; Tire tread depth right inner: 10 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Unladen weight: 8,554 kg Payload: 15,446 kg GVW: 24,000 kg Maintenance APK (technical inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €1,380 per month (default, 72 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Gksdpj Ai Rbkjfx Agrod Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight approx. 21 kg Gsdsx R Efgjpfx Agrekd - 2000 watts - 7 kg - Speed: 10,000 – 18,000 rpm Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: used, KUKA KR 210 L150-2 2000: 6-Axis Robot The KUKA KR 210 L150-2 2000 (Series 2000) is a powerful 6-axis industrial robot specifically designed for extended reach with a high payload capacity. The abbreviation "L150" indicates the arm extension (long version), which increases the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Key technical data: Gkjdpfx Aszcwxujgrsd Maximum reach: 3,100 mm Nominal payload: 150 kg Additional load (arm/wrist): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Self-weight (without controller): approx. 1,285 kg Protection class: IP65 (standard) Mounting position: Floor Axis data (range of motion & speed) The Series 2000 is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): +65° to -209° | Max. speed: 81°/s Axis 4 (A4): ±350° | Max. speed: 100°/s Axis 5 (A5): ±125° | Max. speed: 110°/s Axis 6 (A6): ±350° | Max. speed: 184°/s Typical applications Due to its large workspace and payload capacity, the manipulator is ideally suited for: Material handling and palletizing tasks over long distances. Milling applications and mechanical machining (e.g., deburring of components). Spot welding and handling in automotive production. Additive manufacturing and large-part 3D printing. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!