Used Lab Grinders for sale (31,935)

Condition: used, Julabo Type: PRESTO W80t Refurbished! Working temperature range -80 ... +250 °C Temperature stability ±0.01 ... ±0.05 °C Heating power 3.4 kW Pump power flow rate 0 ... 40 l/min Pump power delivery pressure 0.1 ... 1.7 bar Refrigerant information Refrigerant R507 R23 Filling weight 720 g 500 g Cooling water temperature range 10 ... 15 °C Cooling water differential pressure 1.5 ... 6 bar Cooling water consumption 2 l/min Pt100 external sensor connection integrated Second external Pt100 sensor connection accessories Integrated programmer 8x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display 5.7" TFT Touchscreen Temperature setting touchscreen Total dimensions (W × D × H) 43 x 65 x 126 cm Condition: used Weight approx. 170 kg Hfedpfxjvwch Te Ah Nsb Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) Further questions can We will be happy to answer your questions over the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Hfedpfxexzuiaj Ah Njb

Condition: ready for operation (used), functionality: fully functional, A good used automatic labelling system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required Hfodowufb Aepfx Ah Neb Single phase 240Volt AC supply Ready to ship worldwide

Condition: excellent (used), - Multifunction machine: Hsdpfx Ahjwxu R Is Nefb PASTEURIZES - COOKS - COOLS - MIXES - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant: R404A - Voltage: 400V / 3PH / 50Hz - Power: 5300 W - Year of manufacture: 2015 -Iiedcuewxu R Is T Rxiei - Electronic controls - Semi-hermetic compressor - Air-cooled condenser - Refurbished machine: The machine is prepared upon order; delivery and return times are agreed at that moment (please request price after refurbishment).

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, total length: 2,420 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 1,200 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 6 bar, maximum load weight: 350 kg, cage diameter: 1,180 mm, We are selling a like-new Laborex dual-chamber parts cleaning system, ideal for maintenance operations but also suitable for all other cleaning tasks. Type: Loborex R-12-RVS-W/E-2T Two-chamber system with washing and rinsing functions with forced-air drying (cold air); a heating cartridge can be retrofitted. Transport trolley for easy loading and unloading. Pneumatic lid opening via button. Pneumatic switching from washing to rinsing. Hedpfx Aswglfrsh Nsfb Siemens KTP 400 control system, see image. 2 x 2 filter pots for dirt collection integrated in the return line (wash tank and rinse tank). Machine dimensions: 2300 x 2420 x 2500 mm (width x depth x height). Basket diameter: 1180 mm. Useful height inside: 500 mm. Wash tank capacity: 560 liters. Rinse tank capacity: 130 liters. Voltage: 400 volts. Maximum power consumption: 23 kW 38 A. Compressed air: maximum 10 bar, minimum 6 bar for controlling the lid and slide valve (changing from Washing on rinsing) Water connection 1/2" maximum pressure 6 bar Drain 2 x 2" (wash tank / rinse tank) Wash pump pressure 5 bar Rinse pump pressure 2 bar Built in 2023, only used as a demonstration unit, thus in completely new condition 2 large maintenance hatches for wash and rinse tank Steam extraction system Detergent dosing can be retrofitted upon request System can be delivered and commissioned upon request Complete operating instructions, circuit diagram, and spare parts list included

Condition: good (used), Year of construction: 2013, Labotek Trockenlufttrockner DDM 5/60 60 Liter Bj. 2013 + Förderer price: 4.950 € Contact: Mr. Rainer Eckerle Hedpfov Rdbbjx Ah Njfb

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. Hsdpfewwh Evjx Ah Nofb The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2003, condition: used, Various blasting machines are for sale! Roller table blast machine Trough belt shot blast machine Haengebahn blasting machine Rotary table blasting machine Blast cabinet Pressure blasting cabinet . Hjdpfo Hq S Dex Ah Njfb

Condition: good (used), functionality: fully functional, Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Hfsdpfovtxmwjx Ah Nob Power: 0.5 kW

Condition: excellent (used), -Multifunctional machine: -PASTEURIZES - COOKS - MIXES - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant gas: R404A - Voltage: 400V / 3PH / 50Hz - Serial number: 179342 Hsdpfxjwxu Rzj Ah Nsfb - Year of manufacture: 2015 - Electronic controls - Semi-hermetic compressor - Air-cooled condenser - Refurbished equipment: The equipment is prepared when ordered; collection and return deadlines are agreed at the time (please request the price after refurbishment). The listing was translated automatically. Translation errors are possible

Year of construction: 2015, condition: excellent (used), Octopus Automatic Check Weigher with Printer Labeller Weight range 40grams to max 6kg Fully stainless steel With VWS Printer labeller, Type LPX R Blow XL, Model PX4 / 300 Currently running a 100mm wide label Dimensions 1700mm long, belt width 300mm Video of machine in use avilable on request In excellent condition Hfjdpfx Ajn R Syieh Njb

Condition: used, Year of construction: 2007, Labotek dryairdryer DMD/DT 25/40 40 Liter year 2007 + conveyor + 2 K Mischweiche price: 3.450 € Hodpetzmuhofx Ah Nsfb Contact: Mr. Rainer Eckerle

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software Hfedpexuqk Hefx Ah Njb - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: used, Labor E275 lathe equipped with a Fagor control system In good condition, available for inspection Includes 3-jaw chuck, rests, cooling, and books Turning diameter above the bed: 550 mm Hsdpfx Aoxm Ugveh Nofb Turning diameter above the slide: 375 mm Center length: 2000 mm Through diameter: 105 mm Spindle speed: 0-2500 rpm

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Hodjvrubnspfx Ah Njfb Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Hfjdpfx Aowikatjh Neb Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Year of construction: 2022, condition: like new (used), Due to the planned closure of our laboratory in May/June 2026, we are offering laboratory equipment for sale in very good and excellent condition. The entire set is available. All equipment has been used as intended, regularly serviced, fully operational, and ready for immediate use. The offer includes, among others: LCS MS/MS, GC MS, fume hoods, spectrophotometer, shakers, laboratory refrigerators, digestion unit, water bath, laboratory furniture, and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical sectors to acquire high-quality equipment at attractive prices. Early reservation of individual devices is possible. Collection is available from May 2026 or upon individual arrangement. We invite you to contact us and inspect the equipment on site in Poland, Warmian-Masurian Voivodeship. Hodpfxexmhfre Ah Nefb

Condition: good (used), Year of construction: 2007, Labotek dryairdryer DMD/DT 25/40 40 Liter year 2007 + conveyor price: 3.450 € Contact: Mr. Rainer Eckerle Hfjdpfx Aov Rcwzsh Nsb

Condition: good (used), Julabo Type: FC 600 Technical data for FC 600 Dimensions (W × D × H) 36 x 54 x 49 cm Weight 48 kg Temperature values: Working temperature range -20 ... +80°C Temperature stability ±0.2°C Mains voltage 230V/50Hz 7 A Power values: Hfjdpfx Ahory Uifj Nsb Heating output 1.2 kW Cooling capacity 20°C 0.6 kW, 0°C 0.34 kW, -10°C 0.21 kW Refrigerant R134a Global warming potential 1430 Filling weight 290 g Pump capacity Flow rate 20 l/min Pump capacity Delivery pressure 0.5 bar Filling volume 6 to 8 l Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel Hfjdpfx Ahsxcivqe Nsb The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: used, Year of construction: 2007, operating hours: 14,700 h, Labeling machine for sale with optical centering system Labeling Machine with Optical Centering System Available for Purchase: For sale is used adhesive labeling machine, boasting an advanced optical centering system. This apparatus is fitted with 8 motorized plates, each complemented with a dedicated photocell for precise optical alignment. It incorporates three adhesive assemblies, spanning 40 MT, and an intricate 4-axis adjustment mechanism mounted on a trolley. In addition, there’s a supplementary adhesive unit with 6 divisions tailored for L-shaped sealing, also on a trolley. Notably, the L-seal tools can be adjusted to cater to U-seal applications on bottle caps. Technical Details for PE Labelers: Hfodpsvlnvrjfx Ah Nsb The PE labeling machine is equipped with a touchscreen interface, complemented by an integrated PLC and modern electronics, all of which can be tailored to specific needs. Features include an electric lift mechanism and speed modulation via an inverter. Additionally, new touchscreen programming can be introduced, tailored to the unique requirements of the user. Automatic Labeling Machine with Adhesive Stations for Rotary Labelers: The machine’s mechanical slider, bearing the adhesive unit, has the versatility to apply diverse label types to an array of bottles. There’s a specified minimum and maximum label dimension that it can accommodate, though these parameters can be altered upon request. Positioned at the adhesive station’s end is a keypad, capable of storing configurations for up to 200 distinct label variants. Through its dedicated program and a photocell system, the adhesive station autonomously applies the chosen label format, all while synchronizing with the optical centering mechanism. Availability of the PE Labelers for Purchase: This adhesive labeling machine with optical centering is set to be available from 26/10/23 at our specialized workshops. In a fruitful collaboration spanning 25 years with one of our Italian partners, we’ve been crafting both rotary and linear labeling machines. Moreover, we offer refurbishing and modernization services for your existing labeling machines, updating them with cutting-edge 2023 electronics. Contact us today for a complimentary quote. Our support extends from the conceptual phase right through to comprehensive installation and initialization of your labeling machine, be it brand-new or a refurbished and warranted unit. We’re adept at crafting any new bottle dimensions you might require, aligned with new bottle molds you choose to incorporate into your product assortment.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Hsdoxp Iybspfx Ah Nofb Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: used, Year of construction: 2007, operating hours: 10,000 h, Used Labeling Machine PE LABELERS Universal Master up to 7500 bph The Machine delivers advanced technology for labeling glass bottles, meeting production demands of up to 7500 bottles per hour. Furthermore, P.E. Labellers manufactured this machine in 2007, ensuring precise operations with its robust design and integrated features. Technical specifications and performance of the Used PE Labellers Labeling Machine Hfsdpfxsvgu Udj Ah Nob The labeller includes eight rotating plates and five labeling stations. Specifically, three stations apply adhesive labels, while two use cold glue. The machine rotates clockwise, which streamlines bottle flow management. Additionally, its manual adjustment system for both the head and labels enables quick adaptations to different formats, thereby enhancing flexibility. Production capacity and configuration The labeller handles glass bottles with a maximum diameter of 120 cm and a standard 0.75-liter format. Consequently, it operates at a top speed of 7500 bottles per hour, making it ideal for medium-scale production lines. Moreover, the system applies labels to the front, back, and neck of each bottle, ensuring a high-quality, professional finish. Labeling method and management in the Used PE Labellers Labeling Machine This machine applies labels using adhesive and cold glue methods. Therefore, this dual approach ensures compatibility with a wide range of label designs and materials. Meanwhile, operators manually adjust the system to maintain precise control during each production batch. Current state and operational specifications The machine remains in storage; however, it is ready for immediate deployment. It has recorded 10,000 working hours, yet it still offers substantial operational capacity. Furthermore, its robust build, weighing 2250 kg, ensures stability and durability even under high-speed conditions. Electrical data and power requirements The labeller PE LABELERS Universal Master up to 7500 bph runs on 400 V, with an installed power of 5 kW and a frequency of 50 Hz. As a result, its electrical configuration meets industrial standards, ensuring efficient energy usage for extended operations. Additionally, its energy efficiency supports long-term cost savings. Applications and technical advantages The Used Labeling Machine PE LABELERS Universal Master up to 7500 bph ensures efficient and accurate label placement. Similarly, its versatile labeling stations handle bottles of various shapes and sizes without compromising output quality. Consequently, this versatility makes it a reliable option for many bottling operations. Technicians and industry experts rely on this machine for its performance and customizable configurations. Above all, it represents an excellent choice for demanding bottling applications.

Condition: used, Year of construction: 2019, Used Linear Labeler PackLab Used Linear Labeler, built in 2019. Very little used therefore kept in excellent condition. Non-stop function with two groups of wrapping labels. Flexible self-adhesive linear labeler for wrapping label application, front and back. Suitable for applying partial or wrap-around body labels on cylindrical containers and partial front and back labels on shaped containers Speed of production: Achieves a production of 220 jars per minute, therefore 13200 jars per hour. Labeler Non-Stop PackLab 2019 base with external labeling stations to give the operator more accessibility both during the work phases and during the format change. N. 2 labeling stations for each label to be applied with automatic interchange in the presence of an end of the reel, breaking of backing paper, and lack of a label on the reel. PLC and other: Hsdpjvgutgefx Ah Nsfb PLC type is Schneider with a 5-inch touch screen. The wrapping belts of the Used Linear Labeler are motorized with speed regulation and with an encoder connected to the machine’s speed. While the upper ribbons are motorized and with stabilizers to keep the container straight. There are inlet and outlet overflow sensors for flow regulation. Adhesive group of the Used Linear Labeler recipe adjustment keyboards with storage of up to 500 formats. This machine is complete with all safety protections according to CE regulations. All the machine user manuals are also available. The original copy of the use and maintenance of the machine is also released.

Condition: used, Year of construction: 2023, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers Hfsdpfx Aevlnv Eoh Nsb review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: 1 warehouse 3 blades 1 hook drum Delivery time equipment of the Used adhesive labeling machine overhauled: This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.