Used Kleingebindewannen Kl for sale (19,313)

Condition: good (used), functionality: fully functional, Year of construction: 2021, Stöcklin EFP 35 OSS Prisma Low-Lift Pallet Truck with Cross-Side Seat for paper rolls - cable reels - reels Year of Manufacture: 2021 Battery: 2022 / Lithium Ion (tested by a specialist company on March 26, 2025, with report) Operating Hours: 291 Rated Capacity: 3500 kg Prisma Forks Long Wheelbase Fork Length: 1900 mm Width over Forks B3: 1600 mm Fork Height Lowered: 280 mm Bjdpfxjxdhyko Acyelp Fork Lift: 205 mm Device Width: 800 mm Floor Plate – Adjustable Function Load Rollers 2 x 200 x 55 in Cast Polyamide GSPO with Charger (tested by a specialist company on March 26, 2025, with report)

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Blsdpfxexpf N Tj Acyep Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: excellent (used), axle configuration: 2 axles, first registration: 10/2025, loading space length: 11,100 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total length: 11,400 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2025, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Unladen weight: 7,520 kg, Gross weight: 33,000 kg, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2025, Axle type: SAF, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 2,500 kg, Tail lift manufacturer: D HOLLANDIA, Tail lift material: Steel, Tail lift size: 200x252, Battery for ramp, NEW, HARDWOOD FLOOR, 2.5 TON FLAP, TRIDEC STEERING, SAF AXLES = Further Information = General Information Cab: Day Registration number: OV-69-YN Driveline Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre profile left: 18 mm; Tyre profile right: 18 mm Axle 2: Steered; Tyre profile left: 18 mm; Tyre profile right: 18 mm Weights Kerb weight: 7,520 kg Payload: 25,480 kg Gross vehicle weight: 33,000 kg Bodpsxctt Hefx Acyjlp Functional Tail lift: D HOLLANDIA, Rear flap, 2,500 kg Environmental Emission class: Euro 0 Condition Technical condition: very good Visual condition: very good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? It’s easy! • Large, rapidly changing stock • Recognisable quality • Competitive pricing • Professional trading • Multilingual support • We understand our customers • Import and transport services • (Export) registration plates arranged quickly • Expert technical services • The security of verified quality • And much more… Please visit our website for special offers and our complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and submit a request via our website. Ask us directly about our European warranty package.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 48277, MIG-MAG pulse machine of the renowned manufacturer MERKLE. The machine is technically in perfect condition. All switches work and the machine welds perfectly. Only the hinge of the wire feed flap is broken. Blodpfjmk H Awex Acysp The technical performance data is best taken from the photographed nameplate. The machine is ready for welding in our warehouse. Test welding is possible at any time. In addition, we supply all accessories and spare parts that you may need. You can download the operating instructions for the machine directly in the advertisement. Shipping possible.

Condition: good (used), different twin press drinker, a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house by appointment. Bsdpfx Acsi Arz Ejyolp

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 6676, For sale: Spray Autoclave manufactured by Neuweiler. Bsdpfxsxqnqis Acyslp The interior is made of V2A stainless steel, insulated, and clad with aluminum or stainless steel sheet. Various programs available: - Sterilization by spray process based on time or F value. - Steam treatment by time or F value. (Probe sensor) Core temperature indication and control included. Connections: Water, compressed air, steam, waste water, and venting. The autoclave was only operated 3 to 3.5 months per year since its initial commissioning. It was used to sterilize pre-packaged foods in aluminum pouches. It has not been in operation for 2 years, but remained installed and connected. Every few weeks or months, it was switched on and run empty. For further questions, please contact me. Thank you. Are you looking for machinery for your production? Contact us, we are happy to assist you.

Condition: excellent (used), Year of construction: 1972, Bürkle long-belt sander with vacuum table and vacuum pump Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7200 mm Weight approx. 900 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Location: Arrives at the end of April at warehouse 54634 Bitburg Sold as is - no warranty - no guarantee Bledpfx Aev Trlaocyep - freight prepaid -

Condition: good (used), functionality: fully functional, power: 97.6 kW (132.70 HP), fuel type: diesel, overall weight: 34,000 kg, Year of construction: 2022, Mobile heavy-duty screening plant/scalper, 2-deck screen Year of manufacture: 2022 Diesel engine operating hours: approx. 1,700 h Feed capacity (theoretical): up to 500 t/h Edge lengths: up to approx. 800x500x300 mm Hopper unit extended, 9.1 m³ with wear lining Feeder belt conveyor: smooth Screen box with spacer frame, screen angle: 15.4–20 degrees Transport: 12.5 degrees Throw: 8–9.5 mm Width: 1,550 mm Length: 4,880 mm (upper deck) Length: 4,500 mm (lower deck) Drive: hydraulic motor 86 cc Screen material brake: 1 unit mounted above the screen Screen media upper deck: 1x perforated plate LW 40 mm, remainder: wire mesh MLW 40 mm Screen media lower deck: wire mesh QM 20 mm Side discharge conveyor lower deck (fine fraction) right: smooth belt Side discharge conveyor oversize lower deck left: chevron belt Main discharge belt: chevron belt Undercarriage B3HD wheelbase: 3,320 mm Track width: 400 mm Power unit: John Deere (Stage V) Bodpfexqggvjx Acyolp Power: 97.6 kW at 1,800 rpm, water-cooled Fuel tank approx. 330 liters Spray system including pump (for dust suppression) Radio remote control Premium lighting Diesel refueling pump Line coupling MobiScreen WITOS FleetView Transport dimensions (LxWxH): 18,310 × 3,200 × 3,400 mm Machine weight: 34,000 kg

Condition: used, Year of construction: 1970, functionality: fully functional, 1 used: Universal milling machine, second-hand • Manufacturer: Klopp • Model: FW 11/4 Bledpfx Acew R T A Eoyep • Year of manufacture: unknown, approx. 1970 • Table clamping area: 1100 x 300 mm • Spindle taper: SK 40 • Swivelling milling head: 2x 110° • Spindle speeds: 40/80/120/240/480/960 • Feeds: 12–340 mm/min Accessories: Various tool holders and cutters, 1 set of collets Hydraulic vice with pneumatic support pins Vice jaw width: 160 mm

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm Bjdswhp Dzopfx Acyjlp - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Year of construction: 2009, condition: used, comprising: 1 vacuum press with heating BÜRKLE type: M8, year of manufacture: 2009, serial no.: , dimensions (WxHxD): approx. 300x180x200 cm, 2 loading tables dimensions (WxHxD): approx. 300x100x180 cm, for alternating loading, 2 film cutters, dimensions (WxHxD): approx. 50x100x200 cm, 2 paternoster racks, dimensions (WxHxD): approx. 100x250x200 cm, with mandrels for film rolls, 1 vacuum pump Bjdjxnam Ropfx Acyolp

Condition: used, total width: 1,140 mm, total length: 1,600 mm, total height: 1,650 mm, Price: On request - Documentation available: No - Main motor power [kW]: 9.0 - Arbor saw blade diameter [mm]: 65 - Transport dimensions: 1600mm x 1140mm x 1650mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bodpfx Ajw Rd Tuocyslp Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Bledpfx Acovmivcoyop Without guarantee - without warranty -

Condition: good (used), functionality: fully functional, power: 97.6 kW (132.70 HP), fuel type: diesel, overall weight: 38,730 kg, Year of construction: 2023, operating hours: 1,050 h, Mobile 3-deck screening plant | 4 fractions | Oversize discharge to the left Year of manufacture: 2023 Operating hours diesel engine: approx. 1,050h Theoretical feed capacity: up to 500 t/h Feed hopper 8 m³ with folding grate Dosing gate at feed hopper Bodsxqf Uljpfx Acyelp Foldable/bar grate MSW100 (radio-controlled) Feed conveyor GB= 1,200mm, smooth belt Screen box with spacer frame Currently without screen media Screen equipment available according to requirements for an additional charge Screening area upper deck: 6,100×1,550mm, cross-tensioned Screening area middle deck: 6,100x1,550mm, cross-tensioned Screening area lower deck: 5,400×1,550mm, length-tensioned Screen inclination: 20-30° Vibration amplitude adjustable: 6 – 10 mm (depending on frequency) 3 material brakes on the upper deck Fine material conveyor discharge height: up to 4,500mm (depending on screen angle) Oversize side discharge conveyor (upper deck, left): discharge height 5,000mm Middle deck side discharge conveyor (right): discharge height 5,000mm Lower deck overflow side discharge conveyor (left): discharge height 5,000mm Radio remote control for folding grate Line coupling Pneumatically assisted scraper on fine material conveyor Dust suppression system with water pump Stockpile monitoring via ultrasonic sensor Hardwired control panel for plant operation Lighting mast with 3xLED John Deere diesel engine 4045 EWS with Stage V turbocharger Power: 97.6 kW Service at 1,000 operating hours = new WITOS Fleetview Transport dimensions (LxWxH): 18,310×3,200×3,400mm Machine weight: 38,730 kg

Year of construction: 2018, condition: excellent (used), overall weight: 12,000 kg, total height: 2,840 mm, space requirement length: 2,540 mm, space requirement width: 5,000 mm, CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS .. mains power supply: 145 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2540 mm .. space requirements -front/back-: 5000 mm .. total height: 2840 mm .. total weight approx.: 12000 kg Laminating line max. textile width 3200mm max. temperature 240°C belt speed 0 -40 m/min Blodpfxexm Rz Ao Acyjp

Condition: good (used), 177 USED Winkler Columbus Batch Oven. TECHNICAL DATA: - Number of shelves: 5 - Baking area: 10 m² Bedexp Dakopfx Acyolp - Gas burner EXTERNAL DIMENSIONS (in cm): - Width: 152 cm, - Length: 281 cm, - Height: 236 cm. CHAMBER DIMENSIONS (in cm): - Width: 120 cm, - Depth: 160 cm. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2007, condition: used, comprising: 1 heated vacuum press BÜRKLE Type: BTF 1528-1400 Year of manufacture: 2007 Serial No.: 11507-20, dimensions (WxHxD): approx. 350x200x200 cm, table surface approx. 280x170 cm; 1 lifting platen table BÜRKLE Serial No.: 11507-30, with 2 support plates, dimensions (WxHxD): approx. 300x140x200 cm; 1 turning table BÜRKLE, for support plates, Serial No.: 11507-10, dimensions (WxHxD): approx. 400x320x200 cm; 1 BÜRKLE film unwinder Serial No.: 8669-71 with cutting device; 1 KRAFT paternoster storage rack Type: 810-41-00001 Year: 1991 Serial No.: 19603016, dimensions (WxHxD): approx. 220x380x150 cm; 1 BÜRKLE panel table for shaped parts, dimensions (WxHxD): approx. 350x120x180 cm; 1 film unwinder stand; 2 safety light barriers; control cabinets; 1 pressure/vacuum tank approx. 1,500 ltr.; 1 BÜRKLE terminal; 1 HP flat screen, keyboard and mouse. Supply does not include stock of coating film, the remaining material stock is to be properly decommissioned by the buyer as instructed. Bjdpfjxnam Dox Acyelp

Condition: like new (used), functionality: fully functional, gearing type: automatic, fuel type: gasoline, fuel tank capacity: 20 l, color: white, overall weight: 3,500 kg, lifting power: 800 kg/m, lifting height: 25,500 mm, axle configuration: 1 axle, first registration: 01/2021, DGUV certified until: 12/2025, next inspection (TÜV): 01/2026, mast type: telescope, Year of construction: 2021, operating hours: 123 h, machine/vehicle number: W09K28135L1KB6003, Equipment: UVV, Klaas Trailer Crane K280 RS Condition: As new (single owner) Year of manufacture: 01-2021 Operating hours: 123.0 h Drive: Remote control Petrol engine All service and UVV safety inspections have been carried out regularly and exclusively by Klaas. Technical Information: Hook load: 800 kg Hook height: 25.50 m Extension length: 27.00 m Support width (min.): 3.88 m Support width (max.): 4.88 m Winch pulling force: 800 kg Jib (800 kg): 4.50 m Vehicle dimensions (L x W x H): 9.22 x 2.09 x 2.55 m Trailer load: 2.8 t – 3.5 t Accessories: 2 x "Ziegelmax" brick forks 1.35 x 0.75 m 300-litre rubble skip Universal single-row brick clamp 2-piece lath fork Personnel basket 1 person / 120 kg Chains and safety accessories Viewing possible: An inspection is possible by prior appointment so you can see the condition for yourself. Simply contact us for further information or to schedule a viewing appointment! Bledpfx Acexpuzxoyep The stated price is net, VAT to be added. All details regarding the offered machine are given without guarantee. Subject to errors, omissions and prior sale.

Condition: excellent (used), functionality: fully functional, Cherry and plum pitting machine Model: MPB for easy pitting Processing capacity approx. 35-190kg/h depending on fruit and size Tabletop device with hand wheel without circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and checked with 3 months warranty Option: Bodpfjiduifsx Acyslp cherry plate cherry stoner Visit our large bakery machine exhibition

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM Bjdpjwd Nx Defx Acyjlp - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm Bljdpfx Aexpq Nlocysp • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: used, Year of construction: 2013, functionality: fully functional, We have a Buhrs W+D BB300 10K 6 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2013. This system needs to come in in our workshop so we are now still able to offer it as-is and/or after our complete maintenance programm. Year of built 2013 6 station base Configuration: Buhrs BB300 - 10K 6 station base Blsdpsxl Uq Esfx Acyjp 4 rotary feeders 1 HF3 vacuum friction feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: like new (used), functionality: fully functional, power: 94 kW (127.80 HP), fuel type: diesel, overall weight: 34,000 kg, Year of construction: 2022, operating hours: 1,238 h, Output capacity up to: approx. 500 t/h Maximum feed size: 800 x 500 x 300 mm Feed height: approx. 3,570 mm Feed height with rear wall folded down: 2,830 mm Hopper volume: 9.1 m³ Hopper discharge belt width x length: 1,400 x 4,500 mm Screening type: double-deck heavy-duty screen Screen area upper deck: 1,550 x 4,880 mm (W x L) Screen area lower deck: 1,550 x 4,500 mm (W x L) Fine material conveyor width x length: 1,200 x 4,380 mm Bledpfexl Szzsx Acyep Fine material discharge conveyor width / length / discharge height: 900 x 7,760 / 2,960 to 3,980 mm Medium grain discharge conveyor width / length / discharge height: 900 x 7,760 / 2,310 to 3,630 mm Oversize discharge conveyor width / length / discharge height: 1,400 x 6,065 / 2,650 to 4,050 mm Drive concept: diesel-hydraulic Engine manufacturer: John Deere Drive unit power: 94-98 kW Transport dimensions: 15,840 x 3,000 x 3,400 mm (L x W x H) Transport weight: 34,000 kg

Condition: used, Year of construction: 2011, functionality: fully functional, We have a Buhrs W+D BB300 10K 12 stations envelope inserting system available. DL up to C4 envelopes. This machine is built in 2011. This system needs to come in in our workshop so we are now still able to offer it as-is and/or after our complete maintenance programm. Year of built 2011 Bljdpfjxl Uqlex Acysp 12 station base Configuration: Buhrs BB300 - 10K 12 station base 9 rotary feeders 1 HF3 vacuum friction feeder 1 AS25 shuttle feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.

Condition: used, Year of construction: 2011, functionality: fully functional, We have a Buhrs W+D BB300 10K 12 stations envelope inserting system with camerasystem available. DL up to C4 envelopes. This machine is built in 2011. This system needs to come in in our workshop so we are now still able to offer it as-is and/or after our complete maintenance programm. Year of built 2011 12 station base Configuration: Buhrs BB300 - 10K 12 station base 9 rotary feeders 1 HF3 vacuum friction feeder 1 AS25 shuttle feeder Divert bin Turning module Alignment module Conveyor belt Autoloader envelope station Bedpfxexl Um Hs Acyelp This system is already equipped with a camerasystem for matching with two camera's. More and other feeders possible.