Used Kitchen Technics for sale (32,488)

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Feed rate X-axis: 70 m/min Rbedpfx Ajycul Sjhzjt Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Milling cutter diameter: max. 100 mm Slitting cutter diameter: max. 100 mm Saw blade diameter: max. 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, slotting, and sawing with stationary profile bar 6-sided machining: optional from the front, possible from below Profile bar protection: machining with stationary profile bar Robust and low-wear direct drives on all axes Axes: 5-axis control for spatial machining Display: 15-inch color screen Interfaces: USB ports, network connection 2-layer machining for pendulum operation Included tools (HSK holders) Two circular saws for aluminum

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, controller model: C98 mit Bedienpult, The machine was retrofitted in 2019 and equipped with a new computer running Calypso software and the VAST Gold probe head! The last calibration was performed in June 2021! TECHNICAL DETAILS Measuring range X-axis: 900 mm Measuring range Y-axis: 1,200 mm Rsdpfxsya Hfxs Ahzjbt Measuring range Z-axis: 700 mm MACHINE DETAILS Control: C98 with control panel EQUIPMENT VAST Gold probe head 7-position probe change magazine Probe change rack Probe accessories Calibration sphere Technical documentation Workstation with monitor Calypso Basic software

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,670 mm, mast type: triplex, fork length: 1,200 mm, Submission of a bid obligates timely collection by 27/02/2026! TECHNICAL DETAILS Load capacity: 2,000 kg Mast type: Triplex Overall height: 2,240 mm Lift height: 5,000 mm Free lift: 1,670 mm Fork length: 1,200 mm Rbodpfxsyfpa Ao Ahzjt MACHINE DETAILS Total weight: 3,630 kg Battery: 48 V 6 EPzS 690 Ah Charger: Hawker digital D: 48/80 EQUIPMENT Double auxiliary hydraulics Integrated sideshift Load backrest Front windscreen 2x front working lights Fork extension 1,800 x 120 x 40 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1061276, filter area: 50 m², total height: 2,760 mm, total width: 1,520 mm, total length: 1,520 mm, operating pressure: 6 bar, Submission of a bid obligates timely collection by 27.02.2026! TECHNICAL DETAILS Rsdpfoyfn Sdex Ahzobt Filter area: 50 m2 MACHINE DETAILS Control type: 24 or 230 V Opening/closing time: max. 2 s Operating pressure: 6 bar Dimensions (L x W x H): 1,520 x 1,520 x 2,760 mm EQUIPMENT Sendzimir-galvanised pipe components Shaped parts Machine connections Flame-retardant antistatic PU spiral hoses Hose cuffs Pipe clamps Mounting material for conveying chips and dust from 7 woodworking machines Pneumatic shut-off slides Slide housings made of die-cast aluminium

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30715522, operating pressure: 10 bar, usable tank capacity: 270 l, Submitting a bid constitutes an obligation to collect the item on time by 27/02/2026! TECHNICAL DETAILS Operating pressure: 10 bar Effective delivery rate: 570 l/min MACHINE DETAILS Rsdpfx Ahjyfn Ewozsbt Connected load: 4 kW Voltage: 400 V Pressure vessel capacity: 270 l EQUIPMENT Duplex filter set WBF 63 MFO/CA (consisting of microfilter and activated carbon filter including automatic float drain) Oil-water separation system KON-C2 incl. inlet and outlet fittings 2 fully automatic vessel drain valves KN 1.230

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,600 mm, cutting height (max.): 2,070 mm, cutting depth: 60 mm, saw blade bore: 30 mm, Submission of a bid obligates you to collect the item by the deadline of 27.02.2026! The machine was overhauled in the workshop, functionally tested, and cleaned in 2025! TECHNICAL DETAILS Cutting length: 4,600 mm Vertical cutting height: 2,070 mm Horizontal cutting height: 1,958 mm Cutting depth: 60 mm Saw motor power: 3.9 kW Saw blade diameter: ∅ 250 mm Saw blade bore: 30 mm Rbsdpfxoyfnurj Ahzjt Saw blade speed: 5,250 rpm Extraction port: ∅ 100 mm Strip gauge: 600 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,826 x 2,838 x 1,428 mm Weight: approx. 910 kg Connection value/power supply: 4.8 kW / 3 ~ 400 V | 50 Hz EQUIPMENT Electromagnetic motor brake Mechanically braked support rollers

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h Rodpsyfnqtjfx Ahzsbt MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid - Push-fit connector for hose or pipe NW 500

Condition: ready for operation (used), Year of construction: 1997, operating hours: 38,000 h, functionality: fully functional, machine/vehicle number: 325202, turning length: 305 mm, turning diameter: 210 mm, rotational speed (max.): 5,000 rpm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 1190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over cross slide: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Tool holder: VDI 20 Rbedpfx Ahjyfgttozot MACHINE DETAILS Control: Heidenhain Elektro Pilot 1190 Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 38,000 h EQUIPMENT Coolant system Tailstock Documentation

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg Rodpfx Ajyb R R Ijhzsbt EQUIPMENT New coolant tank with paper filtration system

Condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, grinding wheel diameter: 400 mm, grinding wheel width: 50 mm, grinding wheel bore: 127 mm, The motor and frequency inverter for the workpiece headstock have been replaced! Additionally, the control cabinet and wiring diagram have been renewed! TECHNICAL DETAILS Centre height: 125 mm (175 mm with riser blocks) Centre distance: 600 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Grinding wheel bore: 127 mm Swivel range: 270° Workpiece headstock speed: 20 rpm to 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel: 10° Table feed speed: up to 6.0 m/min MACHINE DETAILS External grinding wheel motor: 4.0 kW Workpiece spindle motor: 2.2 kW Dimensions & Weight Redjyb R Nqopfx Ahzebt Dimensions (L x W x H): 2,580 x 1,680 x 1,670 mm Machine weight approx.: 2,700 kg EQUIPMENT New control cabinet and new wiring diagram New motor and frequency inverter for the workpiece headstock 2-axis digital readout Coolant tank Geometry according to Kellenberger protocol Extensive accessories

Condition: not inspected (used), Year of construction: 2009, operating hours: 29,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, total length: 7,755 mm, workpiece height (max.): 40 mm, working height: 950 mm, controller model: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h Redpfx Ahsyc S Haszobt EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2008, operating hours: 33,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, working height: 950 mm, controller model: Power Control PC22, TECHNICAL DETAILS Rbodpfeyc Sr Asx Ahzst Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2009, operating hours: 6,000 h, functionality: unexamined, feed rate X-axis: 80 m/min, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,680 mm, travel distance Z-axis: 275 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range X axis: 3,550 mm Travel range Y axis: 1,680 mm Travel range Z axis: 275 mm Main spindle max. speed: 24,000 rpm Working area X axis: 3,060 mm Working area Y axis: 1,210 mm Working area Z axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Rbodpfsyc Smgjx Ahzet Side pick-up station for 2 tools Traveling pick-up station for aggregate/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm), arranged on X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum suction cup positioning 2 working areas for pendulum operation Handheld terminal Automatic central lubrication Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting length (max.): 4,200 mm, saw blade diameter: 320 mm, cutting width (max.): 3,500 mm, overall weight: 4,800 kg, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Rbodpfx Aeyc Sggohzst Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,634 h, functionality: fully functional, machine/vehicle number: 051116206, turning length: 1,000 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, controller model: Fagor 8040 TC, TECHNICAL DETAILS Swing diameter over bed: 450 mm Rsdoycu Igepfx Ahzsbt Swing diameter over cross slide: 215 mm Turning length: 1,000 mm Bar capacity: 52 mm Spindle speed: 4,000 rpm MACHINE DETAILS Control unit: Fagor 8040 TC Dimensions & Weight Machine dimensions (L x W x H): 3,000 x 1,995 x 2,001 mm Machine weight: approx. 2,400 kg Operating hours: 20,634 h EQUIPMENT 4-position tool holder Tailstock Documentation

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,000 h, functionality: fully functional, turning length: 305 mm, spindle speed (max.): 5,000 rpm, swing diameter over bed slide: 440 mm, bar passage: 42 mm, controller model: Heidenhain Elektro Pilot 3190, TECHNICAL DETAILS Swing diameter over bed: 440 mm Swing diameter over carriage: 210 mm Turning length: 305 mm Bar capacity: 42 mm Spindle speed: 5,000 rpm Turret: 12 stations Driven stations: 6 stations Rbodsycu A Ropfx Ahzjt Tool holder: VDI 20 MACHINE DETAILS Control: Heidenhain Elektro Pilot 3190 Dimensions & Weight Machine dimensions (L x W x H): 2,800 x 1,651 x 1,771 mm Machine weight: approx. 3,000 kg Power-on hours: approx. 17,000 h EQUIPMENT Chip conveyor C-axis Driven tools Parts catcher Tailstock Documentation

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,800 h, functionality: fully functional, machine/vehicle number: 11415594804, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain iTNC 530, table load: 300 kg, TECHNICAL DETAILS Travel X-Axis: 500 mm Travel Y-Axis: 450 mm Travel Z-Axis: 400 mm Clamping surface: Ø 630 x 500 mm Swivel range: -5/+110 degrees Rbsdpjycuztsfx Ahzot Table load: 300 kg Speed: 10,000 rpm Spindle drive: 13 kW Tool magazine capacity: 60 Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain iTNC 530 Operating hours Power-on hours: approx. 65,300 h Spindle hours: approx. 38,800 h Machine weight: 4,850 kg EQUIPMENT ECO Tower 60 by Lang NC swivel rotary table C+B axis 3D probe Renishaw Chip conveyor Paper belt filter coolant tank 600 l Internal coolant supply 20 bar Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 Rodpoycuvkjfx Ahzobt MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT 3-jaw chuck Tailstock Multifix size B Documentation

Condition: ready for operation (used), operating hours: 28,339 h, functionality: fully functional, turning length: 450 mm, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, controller model: Siemens 840D ShopTurn, TECHNICAL DETAILS Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Main spindle speed range: 5,000 rpm Counter spindle speed range: 5,000 rpm Bar capacity: 65 mm Tool holder: VDI 30 Driven tool stations: 12 Driven tool speed: 5,000 rpm Rapid traverse X-axis: 60 m/min Rbedoycupqepfx Ahzet Rapid traverse Z-axis: 45 m/min MACHINE DETAILS Control: Siemens 840D ShopTurn Dimensions & Weight Required space with chip conveyor: 6,895 x 2,284 x 1,885 mm Machine weight: approx. 4.3 t Operating hours Power-on hours: 59,643 h Spindle hours: 28,339 h EQUIPMENT Chip conveyor Sub spindle Hainbuch collet chuck 65 mm Hainbuch collet chuck 42 mm Parts catcher Conveyor belt C-axis Driven tools Documentation

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Rodpfoycqc Tex Ahzobt Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Rbjdpfsya Efwsx Ahzet Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm MACHINE DETAILS Control: Charmilles Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Redpeya Ed Hefx Ahzjbt Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Machine weight: 3,500 kg Rbedpfoya Ecvjx Ahzst EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Hinged belt chip conveyor

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Rjdpfx Ajya Dy Hohzobt Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Rbjdpeya Dw Sefx Ahzst Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact