Used Kf 4000 for sale (5,495)

Condition: excellent (used), Year of construction: 2015, Technical Data: Capacity Max. Swing Diameter: Ø 600 mm Max. Turning Diameter and Length: Ø 370 x 750 mm Spindle Bore: Ø 82 mm Spindle Center Height from Floor: 1,140 mm Spindle Bearing/Bore Diameter: Ø 140 / Ø 90 mm Spindle Nose: A2-8 Spindle Speed: 4,200 rpm C-Axis Resolution: 0.001° Sub-Spindle Center Height from Floor: 1,140 mm Spindle Bearing/Bore Diameter: Ø 90 / Ø 53 mm Spindle Nose: F-140 Spindle Speed: 6,000 rpm C-Axis Resolution: 0.001° Travel and Rapid Traverse Travels X-Axis: 267 mm, Z-Axis: 840 mm Y-Axis: -50 to +70 mm, A-Axis: 780 mm Rapid Traverse X-Axis: 30 m/min, Z-Axis: 30 m/min Y-Axis: 10 m/min, A-Axis: 30 m/min Power Spindle Motor (30 min. / 100% duty cycle): AC 22 / 15 kW Max. Torque: 618 Nm (S3 25%) Driven Tools Hfodpfxowp Uhhs Afien Number of Turret Stations: 15 Max. Tool Speed: 6,000 rpm Drive Power (30 min. / 100% duty cycle): 7.5 / 3.7 kW Max. Torque: 48 Nm Tooling Live Tool Stations: 15 Tool Cross Section: 25 x 25 mm For Boring Operations: Ø 40 mm LNS Short Bar Loader Servo III Dimensions Height: 2,300 mm Depth (without chip conveyor): 2,140 mm Width (without chip conveyor): 3,000 mm Net Weight: 6,200 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm Hfjdswirz Ejpfx Afijn 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 4000 600 M D1300) € 21.800,--

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Hfjdpfx Afjw Syzqoien Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 5250, For sale due to hobby discontinuation and age: Eckold KF 324 Power Hammer Picolo in perfect condition. The machine was completely overhauled by Eckold in 2023 for EUR 13,000 and has not been used since. The tools shown in the photos are included with the machine, as well as the operating manuals, etc. I cannot provide VAT as I am a private seller. No shipping, pick-up only. Hfjdpfx Afjxf Id Soisn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. Hjdpfxexf Hm So Afiofn In good working condition. Inspection is possible by appointment. Available: NOW

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 55062012, filter area: 577 m², suction capacity: 80,000 m³/h, empty load weight: 9,900 kg, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Filtration area: 577 m² MACHINE DETAILS Unladen weight: 9,900 kg Transport packages: 1 Hfodpfx Ajxcnthsfion EQUIPMENT Extraction system Fire extinguishing system Control cabinet included Shaker cleaning system CE marking present

Condition: good (used), Year of construction: 1997, Flanging and dishing machine BOLDRINI - RIBO 20 HY x 4000 Hydraulic Press and Manipulator Field off aplication Pressure vessel Division Tank Head Manufacturing Hfjdoxcnpcjpfx Afijn Silos & Storage tanks Road & Railway Tankers Fume heads Boiler manufacturing   Knuckel heads R-30 / 40 / 50/ 60 / 70 / 80 / 90 / 100 Turning attachment eletric driven Attachment for smaller diameter Motorized Clamping cyinder in X-Direction on nose Extended closed nose construction Stainless telescopic covers in X-way Max. workpiece: 4000Ø Maximum sheet thickness: 20mm Max. dishing radius: 400mm Min. product Ø: 30 Max height on dishing side:900mm Working speed: 0 - 5000mm/min. Power: 45kW Length: 8000mm Width: 1800mm Height: 2900mm Weight: 13000kg

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 2999 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter Hfodpfxjwirnlj Afion € 2.480,- 4 meter € 3.839,- OPTIONS: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 493,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 114,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Year of construction: 2000, condition: ready for operation (used), Two metalworking machines are available. 1) Graule AS450 notching saw, year of manufacture: 1994, speed: 2800rpm, saw blade diameter vertical/horizontal: 450mm/350mm, spindle bore: 40mm, notching height: 153mm, notching depth: 110mm, notching width: 250mm, weight: 400kg. 2) Rotox KF347 lock copy milling machine, year of manufacture: 2000, milling range X/Y: 300mm/130mm, max. plunge depth: 200mm, max. workpiece cross-section: 200mm/100mm, tracing pins: 4, profile width range: 30mm-120mm, profile height range: 50mm-100mm, bar length range: 490mm/3000mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible. Hedpfx Aoxfvhxjfiefn

Condition: ready for operation (used), Air receiver, compressed air tank, pressurized air vessel, Used equipment Manufacturer: Magnet Model: KF 904 Overall dimensions: Width: 800 mm Depth: 800 mm Height: 2680 mm Weight: 1008 kg Year of manufacture: 2016 Hfodpfxjxciqno Afien Operating pressure: 11 Bar Operating temperature: -20°C to +50°C Tank capacity: 1000 liters

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,746 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,995 mm, motor manufacturer: GM 4.3 L, gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 80 %, front tire size: 27X10-12, rear tire size: 32X12.1-15, overall weight: 14,800 kg, empty load weight: 9,800 kg, total height: 3,000 mm, total length: 4,340 mm, total width: 2,150 mm, color: yellow, Equipment: adjustable boom, all wheel drive, cabin, lighting, pallet forks, 🔧 Looking for a reliable forklift? We are industry specialists! We specialize in the sale of high-quality forklifts, offering well-maintained machines in excellent condition. Check out our offer and find the perfect equipment for your company! 💼🔍 🚜 In this listing we present: COMBILIFT C5000SL – DUPLEX 4000 mm – Year 2019 – LPG – CABIN – HEATING – CONDITION 5/5 This forklift is in excellent technical and visual condition, ready for immediate use. Perfect for the wood, steel, and pipe industries, or anywhere long loads must be handled in narrow spaces with precision. 🔍 Key Features & Technical Data: Model: COMBILIFT C5000SL Year of manufacture: 2019 🗓️ Load capacity: 5000 kg ⚖️ Mast type: Duplex Lifting height: 4000 mm ⬆️ Drive type: LPG ⛽ Load center: 600 mm Free lift: 1700 mm Fork length: 1200 mm Mast height: 3000 mm Engine: GM 4.3 L, 175 HP 🔥 Total weight: 9800 kg Overall height: 2780 mm Overall length: 4340 mm Overall width: 2150 mm Operating hours: 6746 h ⏱️ Tires: Solid, superelastic, excellent condition Front: 27X10-12 – 100% tread Rear: 32X12.1-15 – 100% tread Condition: Fault-free ✅ Visual appearance: Very good 👍 🛠️ Equipment: Full heated cabin ❄️🔥 Work lighting 💡 Adjustable boom Sideshift fork ↔️ Pallet forks 🏗️ Hjdpoxfmg Eofx Afiefn Superelastic tires in very good condition ✨ Additional Advantages: Integrated multidirectional steering system 🔄 Comfortable operator cabin 🪟 High reliability under intensive use 💪 Fully serviced – ready to work! 🟢 🚚Extra Benefits: Transport across all of Europe 🌍 FREE initial inspection included 🎁 💶 Pricing & Financing: We offer full financing support: Invoicing available in EUR or PLN 💱 Leasing options for new businesses too (Start-up friendly) 🚀 We work with most major leasing companies 🏦 Leasing decision within 2 hours! ⏳ ✅ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 20.4007.08/208-030, working range: 3,000 mm, sheet thickness (max.): 60 mm, total length: 13,000 mm, table length: 12,500 mm, table width: 3,000 mm, The non-functional machine can still be restored to working order with various repairs. The following machine components are defective and must be repaired: - Computer defective (computer not included) - Height control defective - Cable break in control wiring Hodpfsxfki Dox Afisfn The flap extraction table was renewed around 2017 and is operational. Power source: Kjellberg Fine Focus 800 (last operated in 2024) IHT PCS 2100 Linear Drive The machine must be dismantled and loaded on site by the buyer. An existing fully functional extraction system can be purchased separately if required (price negotiable).

Condition: excellent (used), Year of construction: 2001, Eckold Kraftformer KF 665 ECKOLD - KF 665 MACH-ID 9228 Hsdoxcm Epepfx Afisfn Make: ECKOLD Type: KF 665 Year: 2001 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 150 / 300 / 600Min. Maximum sheet thickness:6.0mm Horizontal troath: 675mm Vertical troath: 450mm Max. thickness Stainles:4.0mm Max. thickness Aluminium:8.0mm Motorised ram adjustment:0 - 80 Power: 4.1kW Length: 1950mm Width: 860mm Height: 2050mm Weight: 2000kg

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR Hjdpfx Ajv Tl D Njfiefn FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: ready for operation (used), Spindle speed: 9000rpm, spindle tilt: -5°/45°, spindle stroke: 1000mm, spindle diameter: 30mm, table dimensions X/Y: 750mm/600mm, table height: 880mm, weight: approx. 300kg. An on-site inspection is possible. Hfodpfsxfviiex Afijn

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. Hedpfx Afohcnhmoijfn - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: used, In this offer you purchase a used plotter/large format printer ‘Canon imagePROGRAF TX-4000’ Object of sale: 1 x Canon imagePROGRAF TX-4000 with the following equipment: incl. stand incl. collection basket Condition: This offer is a used appliance, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Hfjdpfxst Nfdko Afijn A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Hfodpfevk T S Asx Afisn Tailstock

Condition: excellent (used), Year of construction: 1980, ECKOLD - KF 460 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Hjdpfoxcluvox Afisfn Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:3.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 4042, Offer 25216 Technical Data: - Max. turning diameter over bed: 1025 mm - Max. turning diameter over support approx.: 760 mm - Distance between centers: 4000 mm - Spindle bore: 180 mm - Spindle speeds: 70 to 450 rpm - 300 to 630 rpm - Feeds longitudinal / cross - Tailstock: MK 6 - Tailstock quill travel: 370 mm - Chuck: 1000 mm - Quick-change tool holder with various inserts - 2 x steady rest - Digital display HEIDENHAIN - Drive: 400 V / 20 kW Hfodswpfm Uspfx Afisn - Space required approx.: W 6500 x H 2250 x D 2350 mm - Weight approx.: 11000 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter Hfsdov I Tfdopfx Afijn - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm - Weight approx. 500 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: S 2560, Offer 23461 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 4 mm - hydr. cutting angle adjustment - Stroke rate depending on cutting angle and cutting length approx. 20 - 25 per/min - Motor backgauge 10 - 1000 mm - Cutting length adjustment - Hydraulic hold-down device - Front angle stop Hfodpoma Dcijfx Afien - Front support arms - Backspace protection - Pneumatic connection 6 bar - Drive 400 V / 9 kW - foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2100 mm - Weight approx. 9000 kg

Year of construction: 1994, condition: good (used), machine/vehicle number: S 2645, Offer 22347 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 6 mm - cutting gap adjustment - stroke rate depending on cutting length approx. 20 - 25 per/min - backgauge with positioning control ELGO 10 - 750 mm - Cutting length adjustment - hydraulic hold-down - front angle stop - front support arms laterally movable - drive 400 V / 15 kW - foot switch - space requirement without support arms approx. W 4850 x H 2000 x D 2300 mm - weight approx. 10800 kg Hfsdpsibmaxsfx Afisn

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Lg.No. 20314 Technical data: Hfedpfx Afek H D Dfjion steel - stainless steel - aluminum - plastic ,machining deburring and beveling operation is carried out with milling cutter support angle - bevel angle inclinable bevel angle adjustment 15 to 45 ° bevel width continuously adjustable 0 to 7 mm length of guide bar 500 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 1779, Offer 25027 Technical data: - Load capacity 5 t Hfodpfx Aewptpdofijn - Useful height 900 mm - Load pickup in the middle - Traverse beam HEA 260 6050 mm - Crossbeam HEA 180 with adjustable swivel hooks 4050 mm - Weight approx. 850 kg