Used Kel Varia for sale (1,392)

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Lsdovtnm Hopfx Ad Njhb Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm Ljdpfxsyackdo Ad Njhb z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2007, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m Lhsdpfsyaci Tsx Ad Njb 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min Ledpoyaci Hefx Ad Njhb total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits Lhodpfx Asyaam Aod Nsb • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Lhedpfx Aex U Tined Njb Extra Information Machine still under power

Condition: used, Year of construction: 2007, operating hours: 73,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 24,649 h, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Lhsdpfx Ajxwtp Red Nob Additional equipment: - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Lhsdpfxjxgdr Ij Ad Njb

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1 CNC Universal Machining Center DECKEL MAHO - DMU 50 T Year of manufacture: 2003 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control: Siemens 810 D Spindle speed range: 20 - 9,000 rpm Main spindle drive power: 9 / 13 kW Tool holder: ISO 40 DIN 69871 Table dimensions: 700 x 500 mm Swiveling B: 105° (-10°/+95°) manual Rotating: 360° manual Max. table load: 200 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14H7 mm Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Feed rate max.: 10,000 mm/min Rapid traverse: 12 m/min Minimum input unit: 0.01 mm Total power consumption: 17 kW Machine weight approx.: 3.2 t Space requirement approx.: 4.0 x 4.0 x 2.5 m - 5 axes (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Available immediately. Lsdpfxex Auvvo Ad Nshb Including tool holders and zero point clamping system.

Condition: good (used), Year of construction: 2013, functionality: fully functional, The devices are fully functional. Prepared for operation in a production line. They operated online with an OCE Variostream 8650 roll printer. Lhedpfx Adjtq Agas Neb

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Heidenhain iTNC 530 c-axis 360 b-axis -5/+110 ° turning speeds 20- 10000 U/min power capacity - milling spindle 13 kW tool taper SK 40 no. of workpieces in the magazine 16 Stück rapid traverse 24 m/min table surface area 630 x 500 mm Lhsdpew Eyg Isfx Ad Neb table load 200 kg weight of the machine ca. 4,0 t dimensions 2,3x 3,2 x 2,75 m 3 + 2 axis Milling Center - Turn-/swiveling table full programmable - electr. hand wheel - new spindel in 2015

Condition: used, Year of construction: 1999, serial number 10970000633 Lhjdpfxox Uz Ape Ad Njb control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg

Condition: used, Year of construction: 1999, serial number 10970000633 control 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control 67 10.221.661 x-travel 600 mm y-travel 700 mm z-travel 550 mm spindle SK40 - neu - 380 Std. spindle speed: 12.000 U/min tool change unit 30 Plätze Infrarot-Taster 600 L 40 bar mode of operation 3 + 4 MillPlus IT flushing gun mit Pumpe Durchmesser 630 mm T-slots 9 T-Nuten 14 H7 / 63 mm capacity 700 kg Lodpfjx Uz Avjx Ad Nshb

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm Lhedpfowm Rqajx Ad Nob

Condition: excellent (used), Year of construction: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Endsheet Paster. For inside & outside gluing of end sheet papers, greetings cards inserts and glue-on mounts. Comprising: 1 x product feed (spare feed arm for large format products) 1 x sheet/card feed Sheet counter PVA cold glue system Robatech glue system Table delivery Integral compressor I.R. light beam guard Including tools & accessories. Specification: Product sizes, outside gluing, Max: 520 x 310 mm Min: 100 x 70 mm inserting/tipping-in, Max: 320 x 260 mm (with accessories) Offset gluing (for outside gluing only): - Maximum 50 mm from the fold Lhjdpfxex Uwzns Ad Njb - No restrictions in travel direction Mechanical speed, Max: 8,400 cycles/hr.

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Chip conveyor Chip flushing gun Lsdpfx Aeuqmvksd Nshb 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 Ljdspxm Anepfx Ad Nehb With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Lhsdpfoxxyd Dsx Ad Nob Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Operating manuals

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Lhjdpfjw Agxrox Ad Neb Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis Lhjdpoxn Aczefx Ad Neb - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system Lhjdpfx Adjxuh Rds Nob - 4 machine feet - Operating manual

Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 320 Ledpfx Ajuw Sd Ied Nohb Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 - 4,500 rpm infinitely variable With the following accessories: Manual swivel rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X , Y , Z axis Splash guard cabin Machine light 4 pcs. Height-adjustable machine shoes Coolant device Operating instructions

Condition: ready for operation (used), Technical Data – DECKEL MAHO CNC Machining Center General Information Manufacturer: DECKEL MAHO Machine type: CNC Vertical Machining Center Axes: X / Y / Z (optionally with B and C axes depending on configuration) Control: Heidenhain TNC 426/430PB Working Range: Travel X-axis: 710 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Feed Drive Drives: AC servo motors Feed rate X/Y/Z: infinitely programmable up to 10,000 mm/min Rapid traverse X/Y/Z: 30 m/min Setup mode: 20 – 2,000 mm/min Input increment: 0.01 mm Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance: with direct measuring system: 0.010 mm Main Spindle – Version 1 (Standard) Max. speed: 12,000 rpm Drive: AC servo motor / motor spindle Motor output: 10.0 kW at 100% duty cycle 15.0 kW at 40% duty cycle Speed range: stepless: 20 – 12,000 rpm Setup mode: 20 – 800 rpm Torque: available at the spindle, efficiency considered (see power diagram) Main Spindle – Version 2 (Option) Max. speed: 30,000 rpm Motor output: 15.0 kW at 100% duty cycle 20.0 kW at 40% duty cycle Speed range: stepless: 20 – 30,000 rpm Setup mode: 20 – 800 rpm Power diagram Power and torque charts available for: 12,000 rpm spindle 30,000 rpm spindle Designed for continuous operation (S1) and short-time operation (S6 – 40%) Working Spindle – Tool Interface SK version Tool holder: SK40 to DIN 2079 Steep taper shank: DIN 69871 A Tool clamping: hydraulic / mechanical Pull stud: DIN 69872 Form A or ISO/DIS 7388/2 Type B HSK version Tool holder: HSK-E50 to DIN 69893 Tool clamping: hydraulic / mechanical Tool Changer – SK Magazine positions: 24 (optionally 60) Max. tool length from spindle nose: 315 mm Max. tool weight (automatic change): 6 kg Max. total magazine weight: 80 kg (optionally 180 kg) Tool Changer – HSK Magazine positions: 24 (optionally 60) Max. tool diameter: 40 mm Max. tool length from spindle nose: 150 mm Required compressed air: 5.5 – 8.0 bar Work Table Clamping surface (standard): 1,000 × 600 mm Permissible table load: 800 kg NC rotary table (optional): Clamping surface: Ø 700 × 500 mm Load: 350 kg Weight & Transport Machine weight (standard): approx. 5,500 kg Max. installed weight (incl. workpiece, coolant, etc.): approx. 8,100 kg Transport weight: approx. 5,500 kg Transport dimensions (L × W × H): 2.75 × 2.02 × 2.73 m Media / Connection Values Compressed air: Lhsdpfjxzvn Dex Ad Nob Minimum pressure: 5.5 bar Max.: 8.0 bar Room temperature: Operation: +15 to +35 °C Optimal: +20 to +25 °C Relative humidity: 20 – 75 % Noise level: < 80 dB(A)

Condition: used, Geldmacher MST / Deckel FP4M Milling Machine, Tool Milling Machine Weight: approx. 1,450 kg Lhedsxcldkjpfx Ad Nob Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travels: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill stroke: Vertical quill: approx. 90 mm travel; additionally, the vertical milling head is movable on the spindle head Spindle speed range: Approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (max. feed rate): approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, we can issue a net invoice (VAT-free) provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data as well as mistakes in the article description may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 32,966 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,534 mm, overall weight: 3,000 kg, product length (max.): 1,783 mm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2001. It features a manual rotary table with a clamping surface of 700 x 500 mm and a maximum load of 200 kg. The spindle speed reaches up to 9,000 rpm, and the machine includes a tool changer with 16 magazine slots. Dimensions are 1,783 x 1,647 x 2,534 mm, weighing 3,000 kg. Consider the opportunity to buy this DECKEL MAHO DMU 50 T vertical machining centre. Contact us for more information. • Rotation: 360° • Swivel: -10°/+95° • Spindle Speed: 9000 rpm • Power (100%/40%): 9/13 kW • Tool Holder: SK 40 DIN 69871 • Feed Rate X, Y, Z: 10000 mm/min • Rapid Traverse X/Y/Z: 12 m/min • Manual rotary table with swiveling axis • Clamping Surface: 700 x 500 mm Ljdpfx Adsx Uqmdj Njhb • Maximum Load: 200 kg • Slot Spacing/Width: 63 mm / 14 H7 • Magazine Slots: 16 • Maximum Tool Length: 290 mm • Maximum Tool Weight: 6 kg • With electric hand wheel Dimensions Machine Depth 1647 mm