Used Kant Tool for sale (37,181)

Condition: excellent (used), Year of construction: 2010, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6435 Make: NIKI AG Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Manuel or hydraulic: Manuel Number of matching vices:10 Length: 340mm Hjdszc Iknspfx Agmjnn Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6436 Make: NIKI AG Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Manuel or hydraulic: Manuel Number of matching vices:10 Length: 340mm Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hnodpfx Agszc Ii Rjmen

Condition: excellent (used), Year of construction: 2013, Eckold tool ECKOLD - FWR60S Stretching dies for 2 mm steel 60 mm round MACH-ID 6883 Make: ECKOLD Type: FWR60S Year: 2013 Length:300mm Hnodpfxezc H N Ne Agmsn Width:150mm Height:150mm Weight:20kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, Eckold tool Hsdezc H H Uspfx Agmenn ECKOLD - FWA402S Shrinker jaws for 1.5 mm steel 40 mm round MACH-ID 6884 Make: ECKOLD Type: FWA402S Year: 2013 Length:300mm Width:150mm Height:150mm Weight:20kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, Eckold tool ECKOLD - FWR403S Stretching dies for 1.5 mm steel 40 mm round MACH-ID 6886 Hsdpjzc Hz Ssfx Agmenn Make: ECKOLD Type: FWR403S Year: 2013 Length:300mm Width:150mm Height:150mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: Hedpfx Agjzc D Ehsmjnn The machine can be viewed while powered up.

Condition: used, SYSTEM Brand: Bedrunka+Hirth Model: TSM Terminal-Server System version: 2019-01 FUNCTIONS Tool and storage management system Operation via touchscreen with shutdown, reboot, and service mode buttons User interface optimized for industrial workflows Ideal for integration in logistics and inventory control systems CONDITION Hjdpewbal Njfx Agmenn Fully operational Screen and system working correctly

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Hnsdpfx Ajy Awz Regmsn Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Hnodpfx Agjrywgzjmsn Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: good (used), Year of construction: 1995, 1 used universal tool and cutter grinding machine Manufacturer: Deckel Maho Type: FP 1 Year of manufacture: 1995, with CE certification Equipped with Heidenhain TNC 123 digital display Technical data: Hsdpozamw Ijfx Agmjnn X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle mounting: SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight: approx. 1 t Space required: approx. 1.6x1.3x1.8 m

Condition: good (used), Year of construction: 2013, 1 used tool presetter Manufacturer: DMG Type: Microset Vio 210 Year of manufacture: 2013 Serial no.: 99510021418 Hodpoqzgw Aofx Agmenn X-axis measuring range: 410 mm Z-axis measuring range: 465 mm With workbench, under-table, 1,400 mm wide, integrated telescopic drawer cabinet, 5 drawers, with 15" Terra monitor, keyboard, mouse, and Dymo 450 label printer

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: Hedpfx Agern I Rzemenn x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 600 x 200 mm spindle taper SK 30 spindle turning speed range 80 - 2200 U/min feeds X-axis 50 - 550 mm/min feeds Y-axis 50 - 550 mm/min rapid traverse 1500 mm/min quill stroke 45 mm vertical head swivelling +/- 90 ° total power requirement 1,4 kW weight of the machine ca. 500 kg dimensions of machine L x W x H 1,50 x 1,20 x 1,60 m Hsdozczdhepfx Agmjnn Accessories: DRO on 3 axis HEIDENHAIN, solid table, vertical head with quill retraction, counter bearing, various short and long tool fixtures, coolant

Year of construction: 2014, operating hours: 6,750 h, condition: good (used), fuel type: diesel, Nimos ECO-TRAC Weedcontrol / Weed Burner / Tool Carrier Yanmar Diesel 4WD 2014 Video can be provided via WhatsApp. Ongoing stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. offers a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You are welcome to make a non-binding appointment for a viewing and/or test drive. Please call ahead as we are not always present on site. Hedpfszd Eybjx Agmenn Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 600mm/400mm/450mm, table dimensions X/Y: 900mm/450mm, max. table load: 400kg, tool holder: SK40, speed: 4000rpm, feed rate: 4m/min, rapid traverse: 5m/min, tool stations: 20, milling head swivel range: +/-90°. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 3200kg, control: Maho CNC 432, operating hours: 62908h. An on-site inspection is possible. Hsdjzd Eh Sspfx Agmenn

Condition: ready for operation (used), A Maho CNC universal milling machine is available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: SK40, table diameter: 630mm, speed: 3150rpm, feed rate: 4m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3000mm/2800mm/2200mm, weight: approx. 3500kg, control system: Philips CNC 432. An on-site inspection is possible. Hjdpszd Eh Eofx Agmenn

Condition: excellent (used), Year of construction: 1990, Eckold tool ECKOLD - FWA 1306 X Hsdezcx Abspfx Agmjnn MACH-ID 7784 Make: ECKOLD Type: FWA 1306 X Year: 1990 Diameter 130 mm Weight 18,4 Kg Steel 400 N/mm2 = 6,0 mm Inox   600 N/mm2 = 4,0 mm Alu 250 N/mm2 = 7,0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, Eckold tool ECKOLD - FWR 1307 X MACH-ID 7787 Make: ECKOLD Type: FWR 1307 X Year: 2016 Diameter 130 mm Weight 18,5 Kg Steel 400 N/mm2 = 6,0 mm Inox  ;600 N/mm2 = 4,0 mm Hnsdpfx Agezcxz Djmen Alu 250 N/mm2 = 7,0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, Reforming Tool type WT/NFW Diameter 150 mm Weight 16.9 Kg Steel 400 N/mm2 = 6,0 mm Inox 600 N/mm2 = 6,0 mm Aluminium 250 N/mm2 = 6,0 mm For finish forming and calibrating of preformed components. It consists of a tool carrier WT 80 S and forming inserts N NFW 102 Hsdpfx Agjzcxzqomsnn The forming inserts NFW in steel quality are designed for one single radius and one single thickness of material only. Different forming inserts can be put into the same tool carrier WT 80 S. But with one set of forming inserts only one single radius in one single thickness of material can be reformed. Inserts are available different shapes

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Hjdpfozd A U Asx Agmsnn Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: new, Manufacturer: Stäubli Condition: New Hnedpfezcw Rdox Agmsn Type: Robot tool changer system Article number: K86302987 Product group: Robot tool changer Design: Automatic tool changer system for industrial robots Application area: Robot-assisted manufacturing and handling processes Use: Automatic changing of grippers, tools, and process heads Application areas: Assembly automation, handling, machine loading, welding and manufacturing systems Design: Modular quick-change system Manufacturer: Stäubli Robotics

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Steinel, 2-column punching tool -Hole: Ø 40 mm -Intermediate dimension: 165 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions -Dimensions: 295/235/H250 mm -Weight: 19 kg Hnedpfx Ajzcwlnegmsn

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine is under power and can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Hodpfx Agswu Nw Uemenn Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x Hnodpfxjvi Enas Agmen - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: excellent (used), Tool holder steep taper 45 (SK45) to MK2 (for milling arbors, shank milling cutters, for milling machines). Manufacturer: Bahmüller, Type W640/1 – Wilhelm Bahmüller Maschinenbau Präzisionswerkzeuge GmbH Very good condition Without drawbolt (thread M16), with integrated ejector screw for clamped tool. Milling tool holder – tool taper for clamping Price €55,-- net ex location plus packaging costs Hnsdpeymx Edjfx Agmen All technical data subject to errors and omissions. We sell exclusively to countries within the European Community.