Used Ip55 for sale (197)

Condition: used, Three-phase motor, electric motor -Power: 5.5 kW -Voltage: 400/690 V -Speed: 1450 rpm Iodjffm D Hepfx Adnsa -Shaft: Ø 38 x 80 mm -Protection class: IP55 -Dimensions: 450/260/H330 mm -Weight: 43 kg

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Isdpfel Hx Rdox Adnsa

Condition: new, weight max. 0,25 t stroke 4000 mm Iodpoh Un Hdofx Adnoa Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 and stationary deck 0/60 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm Isdpfxswhza Ue Adnja - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) - Blue conveyor belt approx. 3000 x 1300 mm LW Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Ijdpfx Adecgbq Ienoa Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3815407, lifting height: 8,500 mm, load capacity: 16,000 kg, track width: 1,400 mm, rope length: 43,700 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Lift capacity: 16,000 kg Span: 6.5 m Lifting height: 8.50 m Lifting speed: 5.00 / 0.80 m/min Lift motor power: 15.00 / 2.50 kW Lift motor type: H72 Lift motor rating: 40 / 20% Chassis and drive Chassis type: OE-S 06 Travel drive type: SF25228313 Travel speed: 20.0 / 5.0 m/min Travel motor power: 1.25 / 0.32 kW Travel motor rating: 40 / 20% Protection and environmental data Protection class: IP55 Overload protection system: SLE3 Ambient temperature: -20 to +40 °C MACHINE DETAILS Connection voltage: 400 V Control voltage: 230 V Mains frequency: 50 Hz Mechanics and dimensions Wire rope / chain: 330 010 9 Load handling device: H252-4 Rope length: 43.70 m Track gauge / flange width: 1,400 mm Rail width: 50 mm Cab weight: 1,335 kg Crane bridge weight: 2,725 kg Length: 25.1 m Ijdewc Tt Aspfx Adnja Width: 7.4 m Height: 7.6 m Segmentation: 7.9 + 8.0 + 7.9 m EQUIPMENT - Wire rope or chain hoist - Load handling device H252-4 - SLE3 overload protection system - IP55 protection class - Two-stage lifting and travel operation - Long bridge length of 43.70 m - High load capacity up to 16,000 kg

Condition: used, Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Construction: B14G -Brake -Protection class: IP55 -Number: 2x available Iedpfeb R Df Nox Adnoa -Price: per piece -Dimensions: 280/160/H210 mm -Weight: 13 kg

Year of construction: 2021, operating hours: 200 h, condition: like new (used), functionality: fully functional, conveyor belt speed: 3 mm/s, machine/vehicle number: IS 2R 7, 1. Eddy current separator, our type IS 2R 750, having: • - Working width: 750mm; • - Magnetic Rotor with 20 magnetic poles; • - Magnetic field made by Neodymium N45 magnets, stronger than the standard ones (N35); • - Belt made in pvc green, double ply, with n.2 strips mm 10 x 10 x 750; • - Dielectric Cylinder covered by our epoxydic mixture; • - N°2 vertical roller will keep the belt centered • - Gearmotor W75 type, 1.5 kw for the belt + 4 kw for the magnetic rotor; • - Complete frame: chassis + basic frame and discharge cap with installed one splitter (adjustable in 3 directions); • - N°4 Vibrostop installed under each machine legs (Total 16 vs); 2. Electric control panel (Loc/Rem Control) built in waterproof box (IP55), and characterized by: -Double door, external plexiglass + internal steel; -Power inverter (1 to control the magnetic rotor + 1 for the conveyor belt); o -Pctivation Relay for the vibro-feeder; -Touch Panel, installed on the second door, characterized by: ➢ 4Gb Internal memory; ➢ Sim data Slot; ➢ Ethernet port; Iodpjwtzqksfx Adnea 3. Vibro-feeder, our type C.V. 70.150, having: • - Size: width 700 x length 1.500 mm • - Table with adjustable inclination, range 5°÷7°; • - Basic frame to be fixed on the ground; • - N°2 synchronized vibrating motors, using the dual motor principle, 900 watt/each; • - Wiring in electrical junction box, installed directly on to the machine. The equipment was purchased at the end of 2021 directly from the Italian manufacturer MALAMAN C.T.C. which also installed it in our factory. The equipment works perfectly and can be tested at any time in our factory. Upon request, we can also provide installation + commissioning at the buyer's location. EXW Bucharest Price 44 800 euro NETTO

Condition: new, weight max. 1,0 t stroke 4000 mm Use as a stationary chain hoist Chain hoist type GM 4 1000.5-2, 2 strands Iodpfx Ajh Un Hajdnsa painted in color RAL 5017 traffic blue Load capacity 1 ton Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-changing) 1.3 / 5 m/min Lifting power 0.22 / 0.9 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Iedpowmnhvefx Adnsa Cooling medium – matrix: Water Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Condition: new, Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), Unused still in packaging SD motor type: 1CV4182A low-voltage motor, IEC squirrel-cage rotor, self-cooled, IP55 temperature class 155(F) according to 130(B) gray cast iron housing Performance Line Super Premium Efficiency IE4, 2-pole * size 180M, * 22 kW (50 Hz) 24.5 kW (60 Hz) standard color RAL 7030. Ijdpfevrxqmox Adnsa (currently 9 on stock)

Condition: new, Year of construction: 2005, functionality: fully functional, power: 6,200 kW (8,429.64 HP), rotational speed (max.): 744 rpm, input voltage: 6,000 V, input frequency: 50 Hz, input current: 678 A, type of input current: three-phase, overall weight: 22,000 kg, total length: 3,800 mm, total width: 2,850 mm, total height: 2,800 mm, type of cooling: water, protection type (IP code): IP55, 1 unused spare 3-phase electric motor from clearance stock. Manufacturer: Helmke Type: DWK 900-08-037 Power: 6200 kW Speed: 744 rpm Direction of rotation: Clockwise Voltage: 6000 volts Current: 678 amps Protection class: IP55 Insulation class: F Cos. f: 0.91 Frequency: 50 Hz Cooling: Water Bearings: Insulated sleeve bearings Length: 3800 mm Width: 2850 mm Height: 2800 mm Ijdpfxjwliu Uj Adnea Shaft height: 1000 mm Shaft diameter: 240 mm Shaft length: 350 mm Weight: 22000 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 17 rpm i 80.0 -Engine: Neri Motori type T50B4 -Power: 0.06kw -Hollow shaftt: Ø 14 x 60 mm -Protection class: IP55 -Dimensions: 235/100/H130 mm Iodpfxohyut Ue Adnsa -Weight: 3.5 kg

Condition: new, weight max. 0,5 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Load capacity 500 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 1 / 4 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with Iodsh Un E Sopfx Adnja power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control cable including pendant control: 3310 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Iodjv I Alyepfx Adnea Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Varvel, 2-speed geared motor -Transmission: Type: SXA063801114 i=8 / SRS04028G319 i=28 -Speed: 7 rpm -Motor: Leroy Somer 0.09 kW -Voltage: 230V 1400rpm / 380/400V 1380rpm -Protection class: IP55 -Shaft: Ø 19 x 28 mm -Construction: B3 -Dimensions: 355/130/H165 mm Ijdpoh A Iyisfx Adnea -Weight: 7.4 kg

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Iodpfx Ajqabiaednsa Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection class: IP55 -Dimensions: 265/110/H155 mm Iedsh D Sufspfx Adnja -Weight: 4.0 kg

Year of construction: 2007, condition: excellent (used), A well preserved and very solidly built screw conveyor. Was used to discharge filter dust. Used as a rotating ascending screw with a conveying angle of 28°. The dust was then conveyed into a skip container. Manufacturer: unknown Year of manufacture: 2007 Outer diameter of casing pipe: 219mm Isdpfjliiavjx Adnsa Outer diameter screw: 187mm Diameter core tube: 127mm diameter inlet / outlet: 180mm Height of the spiral: 30mm Pitch of the spiral: 80mm Thickness of the spiral: 8mm distance inlet / outlet: 5500mm Total length: 6750mm Weight: Distance outlet/ end motor: 850mm Gear motor: Nord SK4282A-112 M4 Drive power 4 kW Speed: 40 rpm torque: 950 Nm Voltage: 400/690 Volt Efficiency: EFF2 Protection class IP55 Insulation Cl. F Tested for function. Runs smoothly and quietly.

Condition: used, Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Construction: B5 -Protection class: IP55 -Dimensions: 450/295/H250 mm -Weight: 43 kg Ijdpfedwf Tgox Adnja

Condition: used, Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP55 Isdpfx Asfitfijdnea -Dimensions: 600/315/H365 mm -Weight: 103 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 Isdpohvtcmjfx Adnea -Dimensions: 400/170/H210 mm -Weight: 15kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Varvel, geared motor Isdeh A Iybjpfx Adnoa -Type: FRS40/PC 19MM i=10 IEC63B14 -Speed: 135 rpm -Motor: Verhagen type 4P.T063B 0.18 kW 1350 rpm -Protection class: IP55 -Hollow shaft: Ø 19 x 80 mm -Construction: B14 -Dimensions: 385/122/H165 mm -Weight: 6.2 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Iedpfxsh D St Eo Adnea -Manufacturer: Varvel, gearbox type SRS02810G314 -Speed: 138 rpm i=10 -Motor: Leroy Somer type LS56M/T 0.09 kW -Protection class: IP55 -Hollow shaft: Ø 14 x 60 mm -Construction: B14 -Dimensions: 250/110/H145 mm -Weight: 4.4 kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Lenze, geared motor with rotary encoder -Speed: approx. 75 rpm i= 31.738 Iodpfx Aeh Eci Iodnea -Motor: Lenze MDXMA1M 071-12 -Encoder: Hengstler 0 525 498 -Power: 0.25 kW / 1400 rpm -Protection class: IP55 -Brake: 4 Nm -Number: 2x gear motor available -Price per piece -Total dimensions: 445/330/H180 mm -Weight: 20 kg