Used Ip55 for sale (287)

Condition: used, Year of construction: 2018, functionality: fully functional, power: 500 kW (679.81 HP), nominal power: 500 kW (679.81 HP), rotational speed (min.): 1,490 rpm, input voltage: 500 V, input frequency: 50 Hz, input current: 692 A, type of input current: three-phase, overall weight: 2,500 kg, type of cooling: air, protection type (IP code): IP55, ABB AC Motor Godpfezt Sc Iox Ak Uoug Construction: IM1001-B3 Standard: IEC60034-1 Temperature Class: F IP Rating: IP55 Service Class: S1 Power Factor: 0.86 Frequency: 50 Hz

Condition: used, TERMIK Range Gas or diesel-powered 5 decks, 15 openings Usable area: 23.10 m² With integrated loading elevator Maximum power: 128,000 kcal/h, equivalent to 149 kW Forced hot air circulation 2 fans on the 180 series High-efficiency heat exchanger Heat distributed between ceiling and floor Independent steam generator per chamber Steamers located near the combustion cylinder Steamers’ power consumption: 1.5 to 2 kW Standard steam generator: 4 kW Stainless steel and tempered glass doors Removable doors for cleaning Overpressure valves on each chamber Electrical panel with IP55 protection Steamers accessible from the front Internal dimensions: 1850 x 2500 mm External dimensions: 2485 x 3650 mm Loading clearance: 3060 mm Used Tagliavini CT 185/L cyclothermic oven – 23.10 m² baking area Guodpfx Akezyaktj Uog General Overview The Tagliavini TERMIK CT 185/L is a professional, multi-deck cyclothermic oven designed for bakery operations that require a large baking area and even heat distribution. This configuration features 5 baking chambers for a total usable area of 23.10 m², with internal dimensions of 1850 x 2500 mm. The cyclothermic principle is based on the forced circulation of heat from the combustion chamber. In the 180 series, two fans direct the heat flow through the ducts surrounding the chambers, achieving a balanced temperature from the bottom to the doors. The CT 185/L can operate on gas or fuel oil/diesel.

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Depth: 1300 mm Height: 1650 mm Guedpfjzxfnzox Ak Usg

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Gjdpsqabiaofx Ak Usug Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components Gedpfx Aezt Sw Sjk Uoug • Control cabinets IP55 according to plan • Open steel rack constructions • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, RGS AS556 three-phase industrial vacuum cleaner, specifically designed for use in the textile, paper, and packaging industries. Designed for continuous operation and the extraction of edge trimmings and cutting dust, threads, and fibers, as well as packaging waste. Can be used both mobile and stationary, with a 100mm viewing window in the lid. New price approx. €7,300 (2025) DATA, DIMENSIONS & WEIGHT: Voltage in volts: 400/50Hz Protection class: IP55 Power in kW: 4.0 Airflow rate m³/h: 520 Vacuum in mbar: 320 Gedpfsziwtqox Ak Usug Filter area: 1.4m² Dust class: L Absolute filter Option: H14 Collection container Ø 560mm in liters: 215l Suction connection Ø in mm: 70 Weight kg: 35 Dimensions Ø x H in cm: 46 x 116 Design/Variant: painted Dents and scratches are present! Technical specifications and illustrations are not binding. Changes and errors excepted. NOTES ON SALE: An inspection can be arranged at any time in Sassenburg. The price quoted is the gross price, including statutory value-added tax. In the event of a sale to third countries or EU countries, with the exception of Germany, an invoice can also be issued without value-added tax if a valid VAT identification number is provided. NOTES ON COLLECTION: The item is available immediately. We will gladly assist with loading using a forklift.

Condition: new, Year of construction: 2023, operating hours: 150 h, Used Kaeser Booster Compressor N253-G (9/40) without start control / star-delta connection Year of Manufacture: 2023 Operating Hours: 150 hrs Equipment - Compressed air aftercooler design: finned-tube type - Oil supply: via oil pump - Oil pressure monitoring - Oil pressure and discharge temperature indication Technical Data Inlet pressure: 9 bar(g) Final pressure: 40 bar(g) Capacity at 40 bar: 1.74 m³/min Minimum ambient temperature: 2 °C Maximum ambient temperature: 40 °C Compressor block speed: 1,135 rpm Number of cylinders: 2 Drive motor rated power: 11.0 kW Motor efficiency class: IE3 Motor protection class: IP55 Electrical supply: 400 V / 3 Ph / 50 Hz Sound pressure level: 76 dB(A) Gsdozaaqzepfx Ak Ujug Compressed air inlet connection: G 3/4" Compressed air outlet connection: G 1/2" Visit our always have a large selection of new and used compressors in stock!

Condition: good (used), Year of construction: 2020, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan Gusdpfx Aksxpfylo Uog -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 -Dimensions: 1090/780/H1330 mm -Weight: 245 kg

Condition: used, For sale is a two-stage Leybold vacuum pump unit, consisting of a RUVAC WA 501 roots/rotary piston pump and an SOGEVAC SV 300 B rotary vane pre-pump. The components are mounted together on a base frame with a collection tray. Technical data and specifications: - RUVAC WA 501, catalog number 11730 - Nominal pumping speed RUVAC: 505 m³/h - Maximum pumping speed at 50 Hz: 410 m³/h - RUVAC motor: 2.2 kW, IP55 - SOGEVAC SV 300 B, catalog number 960717 - Year of manufacture SOGEVAC: 2019 - Effective pumping speed SOGEVAC at 50 Hz: 240 m³/h - Nominal pumping speed SOGEVAC: 280 m³/h - Motor power SOGEVAC: 5.5 kW - SOGEVAC nameplate weight: 207 kg - Last visible service record: 08/2024 Visible scope of delivery as per the images: - RUVAC WA 501 with motor - SOGEVAC SV 300 B with motor - Direct adapter and connection assembly - Cooling/fan unit - Sensor and connection cables - Base frame with collection tray Used condition with typical signs of use and storage, as well as some minor rust on the frame. The functional condition and achievable vacuum performance have not been re-checked after disassembly; therefore, it is sold as untested. A control cabinet, external cables, or documentation are not shown in the images and are not part of the described scope of delivery. Scope of delivery as per the images. Guodezzr Ndepfx Ak Usg Price net, EXW Kirkel. Loading and organization of transport are possible for an extra charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting Godjy Tnzcspfx Ak Ueug The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: used, Year of construction: 2023, functionality: fully functional, SIEMENS 3-MOT 1CV3282B (2023) The Siemens 1CV3282B is an industrial three-phase asynchronous electric motor from the SIMOTICS SD (Severe Duty) series, featuring a cast-iron frame. It is designed for demanding operating conditions. [1] Its basic specifications are: • Power: 90 kW at 50 Hz (125 HP at 60 Hz) • Speed: 4-pole (approximately 1485 rpm at 50 Hz) • Frame size: 280 M • Efficiency: IE3 class (Premium Efficiency) • Degree of protection: IP55 (dust and splash-proof) • Construction: IMB3 (foot-mounted) Gedszr H U Ajpfx Ak Usug • Weight: Approximately 670 kg 1LE1503-2DB29-0FB5-Z is the precise order number (MLFB code) for the Siemens (Innomotics) SIMOTICS SD series cast-iron electric motor.

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Gujdpfezhw S Rox Ak Ueg

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. Gjdpfxex Antuo Ak Usug The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: like new (used), Year of construction: 2018, operating hours: 3,769 h, Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: Gjdjy T Icgepfx Ak Usug • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Guedpfxey T Ibvj Ak Ujg Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Gujdpfxsxyhdbe Ak Ueg Microprocessor controller: MS-286 Airpol Power Control

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Gusdoxx Snbspfx Ak Usg Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Gsdpszwa Rbjfx Ak Ueug Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Gedjw Rpxcspfx Ak Uoug Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 741 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 633 A, type of input current: three-phase, overall weight: 2,980 kg, Name: AC-LV squirrel-cage motor, efficiency-class 2 Manufacturer: EMZ Type: AKR 400-06-033 Rated output [kW]: 355 Duty type: S1 Rated speed [rpm]: 7410 Number of poles: 8 Direction of rotation: Both Rated voltage [V]: 400 Voltage fluctuations [+/- %]: 5 Connection: Delta Rated frequency [Hz]: 50 Frequency fluctuations [+/- %]: 2 Rated current [A]: 633 Locked rotor current [Ia/In]: 6.5 Type of construction: B3 Degree of protection: IP55 Cooling method: IC411 Frame material: Cast iron Insulation class: F Temperature-rise: B Efficiency [%]: 95.2 Efficiency 3/4,2/4,1/4 [%]: 95,4 / 92,4 Efficiency class: IE2 Power factor [cos phi]: 0.85 Power factor 3/4,2/4,1/4 [cos phi]: 0,83 / 0,74 Rated torque [Nm]: 3424 Locked rotor torque [Ma/Mn]: 1.4 Breakdown torque [Mk/Mn]: 2 Moment of inertia J [kgm˛]: 21,2 Number of starts [cold/warm]: 3/2 Ambient temperature: > -20°C < 40°C Altitude above sea level: < 1000m Bearing design: Antifriction bearing Bearing design [d-end/nd-end]: 6326-C3 / 6326-C3 Fixed bearing: Nd-end Regreasing device: Yes Type of shaft: Cylindrical Shaft-dimensions [mm]: 110 X 210 Shaft-height [mm]: 400 Position of terminal box: On top Cable entries: 7x M63x1,5 Winding protection: 2x 3PTC Bearing protection: 1x PT100/bearing Gjdpfxszl Ddus Ak Uoug Heating elements: 1x200W

Year of construction: 2008, condition: excellent (used), Applications : - Water supply, irrigation. - Heating, ventilation and air conditioning. - Pressure groups, cooling. - Water treatment. Advantages: Gjdpsmih Aasfx Ak Uoug - Easy to install and maintain. - Compact solution for residential and small collective use. - Guaranteed water supply in case of failure of an electric pump. - Assembly, adjustment and testing of the unit carried out directly at the factory. - Flexible operation due to variable speed. Features : - Maximum flow rate: 320 m³/h. - Delivery height: 160 m. - Power range: 2x0.25 kW. - Operating pressure: 10/16 bar. - Ambient temperature: 0°C - +40°C. - Liquid temperature : -10°C - +60°C. - Hydrovar®HVL variable speed drive. Motor : - Power supply: 1 x 230V. - Insulation class: F (155°C). - Protection: IP55. Materials : Pump body and impellers: Stainless steel 304. Collectors: AISI 304 stainless steel. Non-return valves: Brass. Certified for use in drinking water production.

Condition: used, Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), Siemens IEC three-phase asynchronous motor 3~Mot 1AV3162B 1LE1003-1DB23-4AB4 - 11kW Year of construction 2023 SIMOTICS GP MOTOR TYPE: 1AV3162B Low-voltage motor, IEC squirrel-cage rotor, self-cooled, Guedpfou Eugzox Ak Uog IP55 thermal class 155(F) to 130(B) aluminum housing Premium Efficiency IE3, 4-pole * Frame size 160M, * 11kW (50Hz) 12.6kW (60Hz) Standard color RAL 7030, 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3 3 PTC thermistors for disconnection (2 terminals) Top terminal box Weight: 83kg We offer the low voltage motor. ⭐︎ Condition: Very good (used) The heating circuit pump is used but ready for use. The pump worked perfectly until it was removed a few weeks ago. Please refer to the rating plate for data. Scope of delivery as shown Inspection before purchase is possible and expressly desired. All our items are dismantled, cleaned and visually inspected for damage by our company's expert staff prior to sale. Please refer to the description and pictures for all relevant item data / information. All information is given to the best of our knowledge and belief, the goods offered are sold as described and inspected. Shipping possible but buyer pays shipping costs.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Gjdpfjzgrzqex Ak Uoug Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Godszgtzlepfx Ak Ujug Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: good (used), machine/vehicle number: B35 MS 80 2-4 + XPU, input voltage: 400 V, input frequency: 50 Hz, input current: 2 A, type of input current: three-phase, type of cooling: air, protection type (IP code): IP55, Cylindrical geared motor with a 0.75 kW three-phase motor. Supply voltage 400 V, frequency 50 Hz, motor speed 1390 rpm, rated torque 5.15 Nm. Flange-mounted design (B5), shaft diameter 19 mm. Capable of operating in both directions of rotation (clockwise/counterclockwise). Protection class IP55, copper winding, aluminum-cast iron housing. The geared motor is designed for driving machines, conveyors, and mechanical and hydraulic systems. It finds application in agriculture, industry, construction, and other applications requiring reliable drive. Gujdpfx Aezgugiek Usg Technical condition is good, the device is fully functional. Sold as shown in the pictures.