Used International 584 for sale (8,221)

Condition: used, Technical details: Dcsdpfx Aowx Shkegvjh honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Internal combustion forklift truck with a 3,500 kg lifting capacity Design and technology The forklift is equipped with reinforced load-bearing components, a durable frame, and a hydraulic system designed to operate under maximum load. The Nissan K25 engine is a proven power unit known for its high overload resistance and low fuel consumption. The Power Shift automatic transmission ensures smooth driving, increasing operator comfort and safety, especially during frequent direction changes. Pneumatic tires with increased diameter and deep tread perform exceptionally well on ramps, loading yards, and both paved and unpaved surfaces, effectively absorbing vibrations and reducing suspension wear. Precision and operational efficiency The side-shift mechanism allows horizontal fork movement, significantly reducing cycle time during storage and unloading operations. Manual fork spacing adjustment enables quick adaptation to different pallet sizes. Forward and backward mast tilt improves safety when handling heavy loads, facilitating precise placement and stabilizing the load during travel. Standard equipment Nissan K25 engine Side shift – lateral fork movement Mast tilt adjustment (forward/backward) Manual fork spacing adjustment Pneumatic tires LED work lights Reverse alarm and warning lights Technical data Load capacity: 3,500 kg Lift height: 3,000 mm Fork height (lowered): 40 mm Fork length: 1,220 mm Side shift: Yes Mast tilt: Yes Engine: Nissan K25 Engine power: 50 HP Transmission: Automatic Travel speed (loaded/unloaded): 12 / 13 km/h Tire type: Pneumatic Overall length: 3,800 mm (L) Overall length without forks: 2,580 mm (L’) Wheelbase: 1,740 mm (L1) Distance from front axle to fork face: 487 mm (L2) Fork length: 1,220 mm (L4) Single fork width: 120 mm (W) Overall width: 1,225 mm (W1) Rear width: 970 mm (W2) Fork carriage width: 1,000 mm (W3) Outside fork spread: 1,060 mm (W5) Maximum lifting height: 3,000 mm (H) Overall mast height (lowered): 2,120 mm (H1) Overall mast height (raised): 4,250 mm (H2) Fork height above ground: 150 mm (H3) Overall height to overhead guard: 2,090 mm (H4) Mast ground clearance: 120 mm (H5) Ground clearance: 120 mm (H6) Load center distance: 500 mm (C) Rated capacity: 3,500 kg (Q) Single fork thickness: 40 mm (T) Mast tilt angle (forward): 6% (α) Dcjdpfxoycvv Ss Agvjh Mast tilt angle (backward): 12% (β) Weight: 4,700 kg

Condition: excellent (used), Ball valve internal thread -Internal thread: 2 -Full bore, solid sphere -Quantity: 195 pieces in stock Dodpfx Aov Tm Snegvsch -Packaging unit: 12 pieces -1 carton at: 84.00 euros -Price shown: piece

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm Dcjdpfshgnd Aex Agvoh - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW Dcjdpoda A Eijfx Agveh - weight: 2000 kg

Condition: ready for operation (used), Rexroth MNR: R005520180 FD: 584 Linear drive, travel: 1100 mm, used, normal signs of wear, 100% functional, scope of delivery according to photos Dcjdei Eczyspfx Agvoh

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need. Dodpst Hwupefx Agvech

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm Dedpfx Agot Hwvtevjch throat mm total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm Djdpfx Aot Hw T Segvjch throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Dsdpfjw U U Iqsx Agvsch Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Year of construction: 1980, condition: used, max. tractive force: 10 to max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to Dcedpfscdtpljx Agvsh automatic tool feeder hydraulic drawing head and end piece holder locking device automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor

Year of construction: 1959, condition: used, gr. tractive force: 16 to. gr. stroke: 1250 mm Dcjdpfx Ags Rwa Usvsh cutting speed: 5,6 m/min return speed: 30 m/min

Year of construction: 1960, condition: used, max. tractive force: 20.000KG max. stroke: 1250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece Ø: approx. 140 mm max. tool Ø: approx. 50 mm, tool changeover: 2 pieces, Dodpfeui Sbsx Agvjch The machine is equipped with a 2 station rotary indexing table. The machine is equipped with an automatic tool feeder, and is designed for manual series production. The tool locking in the draw bridge as well as in the tool feeder is spring-mechanical (drawing head DIN 1417).

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm Djdpfx Agjgyd T Ejvech clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: good (used), properties: Manufacturer: Interroll condition: good ( used ) Clamping length: 610mm Roll length: 600mm Roll diameter: 60mm Rollers with internal thread Material: steel Stock: 32 pieces Price per piece Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or advise you on the conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. For companies in a wide range of industries, such as: logistics, pharmaceutical industry, trade or the electronics industry we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers. Dsdpfx Agofgvwnovoch

Year of construction: 1981, condition: good (used), Manufacturer: National Broach Type: GHC 12" Year of manufacture: 1981 workpieceØ max.: 355mm pitch circleØ min/max: 100-152mm tooth width max.: 63,5mm Dsdjhad Avepfx Agvoch Modu min/max.: 1,25-6,35mm weight: 3,4t Operation: honing internal teeth

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm max. cutting speed: 10 m/min. max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device Dcedpecdtnhsfx Agveh

Condition: ready for operation (used), Year of construction: 2002, cnc num machine rebuilt in 2002 front-end unit Dcodpfot E N Dmox Agveh max. grinding diameter 200MM max. grinding stroke 200MM max passage diameter 500MM weight 4500KGS

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). Dcsdjdbmgmopfx Agveh The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Dcsdpfxst Dv I Ao Agvsh Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Year of construction: 1951, condition: good (used), machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine manufacturer: Karl Klink type: RW 10 built in: 1951 stroke 1500mm pulling force: 10.000KG working stations: 1PCs drive: hydraulic system equipment: coolant system Dodpfx Aedcdrpegvech Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: good (used), HOLE DIAMETER: 1-100mm HOLE DEPTH: 230-350 mm PIECE DIAMETER: 360-500 mm PIECE LENGTH: 850-1000 mm PIECE HEAD INCLINATION: 15° PIECE WEIGHT: kg GRINDING WHEEL REVOLUTIONS: 18.000-24.000 al' PIECE SPINDLE REVOLUTIONS: 140-1120 al' POWER: kW WEIGHT: 4,5 ton Dcodowf Hgbopfx Agvjh

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Djdpehpqquofx Agvech Max. Tool diameter: Ø 95mm Weight: 4,8to

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine -WKG 189- Data: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. Tractive force: 20t Dcsdpfx Ashu E Egjgvsh Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub

Condition: not inspected (used), Forst RF 16 internal broaching machine -WKG 1371- Technical data: Manufacturer: Forst Type: RF 16 Max. Tractive force: 16t Max. Stroke: 1200mm Dcjdjhu E N Depfx Agvoh Max. Cutting speed: 5,6m/min Max. Workpiece diameter: Ø 700mm Max. Tool diameter: Ø 120mm Workpiece seat: Ø 70mm Note: control valve missing