Used Integral Stops for sale (14,789)

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). Ibjdpozimaajfx Ahyjc The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2008, condition: used, functionality: fully functional, This is a combination steamer, also known as a convection oven, manufactured by Convotherm, model OGS 20.20, in a gas-powered version, direct injection, without a boiler, manufactured in 2008. The unit is set for natural gas; it can be converted to propane gas. The combination steamer is functional; videos can be sent upon request. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN pans and includes 2 x 1/1 GN insert racks. The unit is sold without inspection or warranty, as received from the customer. An inspection will certainly be necessary for recommissioning. Wiring diagrams and documentation are included. Only frozen, ready-made meals have been heated/regenerated in this combination steamer. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Insert slots: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Iedpjz Smhiefx Ahyobc Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (image symbol) for quick selection of predefined cooking recipes Tray Timer (staggered loading) Start time pre-selection in real-time mode Night baking Delta-T baking (requires multi-point core temperature probe) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and improved workplace safety Double-glazed door with integrated door stop Antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam escaping Fan with autoreverse function Handheld spray with stepless adjustment Multi-point core temperature probe Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital rocker switch for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-check RS232 interface Storage of all device settings and cooking recipes in an additional memory module Permanent self-diagnosis for fault detection System with full-text error description Safety program mode: operation of the device with limited functionality is possible Basic prison version Robust design in stainless steel Seamless welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT ATTENTION: The machine is located in Sydney / Australia! Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts. Machining area: 3700 x 2200 mm. The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface. Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm. Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups. 1000 m³/h vacuum capacity via VariAir pump (frequency-controlled). To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system. Power Label above the lifting table for panels up to X=4200 x Y=2200 mm. Touch Label Light - extra label printer under the operator screen for labeling small parts. The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table. Overhead laser for complex contours (laser color green). Screen: 21.5'' / 16:9 touch screen Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling. Barcode scanner Touch Tool - tool length measurement Cold Gun - tool cooling Delivery, installation, and training for the machine can be carried out directly by us for an additional charge. The machine is currently located at our branch in Sydney / Australia. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Isdpfsz Hvy Iex Ahyebc Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. Ibjdpfxox Exndo Ahyec No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Resonator power: 5 kW Working area (L × W): 4,000 × 2,000 mm Sheet metal thickness, steel: max. 25 mm Sheet metal thickness, stainless steel: max. 20 mm Sheet metal thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine Iedpfoz Npdgsx Ahyjbc NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal edge detection 17-inch touch color display Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine enclosure with certified viewing window, door on the right Electric roll-up roof Retrofitting capability for max. 2 additional LLK outlets

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Ibjdpez Ryabofx Ahyec

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 530 022, type of input current: three-phase, input voltage: 400 V, Manufacturer: Deckel Maho Type: FP1 Aktiv-Digital – Heidenhain TNC 123 - 2102 Serial number: 530 022 Technical data Ibedpoz Sqq Tsfx Ahyec • Control system: 3-axis Aktiv linear control Heidenhain TNC 123 • Lubrication: Automatic central lubrication system • Working area (X x Y): 300 x 260 mm (with a vertically adjustable milling head) • Clamping surface (rigid angle table): 600 x 210 mm • Max. table load: 200 kg • Spindle speed: 40 – 2,000 rpm (high-torque direct drive with 8 gear stages) • Feed drive: Infinitely variable digital drive • Main spindle drive: High-torque, pole-switching three-phase brake motor • Measuring system: Direct position measuring system via glass scales in all axes (X/Y/Z) • Positioning accuracy: 0.005 mm • Table slots: 4 pieces of 12H7 slots at a distance of 45 mm Description For sale is a highly precise and versatile tool milling machine DECKEL FP1 in the popular Aktiv-Digital version. The machine is characterized by its compact design, extreme reliability and highest precision in tool, prototype and fixture construction. Highlights & Control System: • Heidenhain TNC 123: Very easy-to-use 3-axis digital display with active positioning (incremental chain measurement and absolute linear measurement). The control system has 20 programmable reference points. • Automatic central lubrication: For minimal maintenance and optimal wear protection, this machine features the valuable upgrade of an automatic central lubrication system. • Central operating convenience: All machine functions, such as infinitely variable feed rate, rapid traverse, motor brake on/off, spindle start/stop and coolant, are clearly arranged directly on the swiveling control panel. • Ergonomics: Mechanical, manual safety handwheels with scale ring in all axes ensure a sensitive response. Additionally, a handwheel scale for fine positioning and a linear scale as a coarse scale are installed. Flexibility in machining: • Vertical milling head: The head can be swiveled by ±90° and can be positioned precisely using a scale. An integrated quick-lock allows it to be quickly and precisely aligned vertically again. • Horizontal machining: The milling head is simply swiveled by 90° and moved backward. • Drilling quill: The vertical spindle has an integrated clamping mechanism and can be extended manually up to 60 mm for drilling operations. Safety: • The machine is equipped with an additional, easily accessible emergency stop button directly on the housing for optimal work safety. Condition & Accessories • Condition: Very good, well-maintained and ready for immediate use. Includes wiring diagram.

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Ibedpszu A D Eefx Ahyec Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder Isdpfxsz Rmabe Ahyjbc - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: used, Year of construction: 2024, Integrated SIAD Industrial Hydrogen Compression System (249 kW) - Manufacturer: SIAD Macchine Impianti (compressor), SAEP & FLOVEX (exchangers), Capelli & Cie (vessels). - Type: Turnkey reciprocating hydrogen compressor skid designed for ATEX Zone 2 hazardous areas. - Applications: Hydrogen gas (H2) boosting for chemical processing, mobility, and energy storage. Technical Specifications - SIAD HMS4-2 Compressor (2024): 249 kW | 384 kg/h | 0.1 to 3.5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP Gas Exchanger R-36050 (2024): 248 L volume | 10 bar(g) | -20 to +200 °C. - FLOVEX Oil Cooler (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli Main Buffer Vessel (2024): 10,250 L | P265GH Carbon Steel | -1 to +0.5 bar(g) | 2,310 kg. Iodpfx Ahsztw Upsyebc - Capelli Condensate Tank (2024): 1,140 L | 316L Stainless Steel (X2CrNiMo17-12-2) | 730 kg. Working Principle & Highlights Low-pressure hydrogen (0.1 bar) is boosted to 3.5 bar(g) at 384 kg/h by the 249 kW SIAD unit. Thermal management is handled by FLOVEX and SAEP exchangers, while the 10,250 L Capelli tank absorbs system pressure surges. - ATEX Compliant: Certified for hazardous Zone 2 gas group IIC environments. - Robust Metallurgy: Built with P265GH steel and 316L stainless steel for H2 service durability. - Modular Skid: Plug-and-play setup combining compression, cooling, and buffer storage.

Year of construction: 2020, operating hours: 15 h, condition: like new (used), functionality: fully functional, number of chambers: 1, laser hours: 6 h, laser power: 220 W, laser wavelength: 1,064 nm, protection type (IP code): IP20, machine/vehicle number: 100102440/49, laser source manufacturer: Coherent, laser source model: Nd:YAG, Equipment: CE marking, We offer this Coherent laser, model Integral, in like-new condition, manufactured in 2020. Manufacturer: Coherent Iodpfx Asz A Tcxjhyjbc Model: Integral Year of manufacture: 2020 Condition: like new Category: 33 Type: Class 4 laser Laser type: Nd:YAG Source: Flash lamp DIN EN 60 825-1:2008-05 MADE IN GERMANY 21CFR 1040.10 / 1040.11 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Column-guided bandsaw, semi-automatic, METORA - KALTENBACH, type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028, year of manufacture approx. 1993 Cutting range: round Ø 380 mm Square 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25-108 m/min, infinitely variable Material feed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor drive power: 4 kW Power supply: 400 volts, 50 Hz - Fully hydraulic bandsaw in a two-column design - Hydraulic saw head lowering with infinitely variable cutting pressure adjustment - Lowering speed infinitely adjustable - Hydraulic clamping of the workpiece with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the feed side with gear motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating element for coolant and hydraulics - Length stop, TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop base length 6750 mm, stop travel 5650 mm, stop arm can be hydraulically folded up Ibodpfxjdzqtgj Ahyjc without roller conveyor Footprint of the base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of the stop system: approx. 800 kg in good condition

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Ibsdpjy Alcisfx Ahyoc Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Ibsdpfolwuk Tjx Ahysc Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 3 m Stroke: 2580 mm Pushing capacity: 20 - 40 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, Ibodpfx Ajzt Twyjhyjc max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, TOX Pressotechnik Industrial Pneumatic Press Station / Pneumohydraulic Press with Roller Guide Table (6 bar, 2.4 m), Used Equipment Technical Data: Type: Industrial Pneumatic / Pneumohydraulic Press Station Overall Dimensions (W × D × H): 1300 × 1270 × 2400 mm Roller Feed Conveyor Dimensions: 470 × 500 mm Work Table Internal Opening / Clearance: 450 × 550 mm Press Cylinder and Drive Data (TOX Pressotechnik): Manufacturer: TOX Pressotechnik GmbH (Made in Germany) Type: Q-K 015.030.200.12 Iodjz Rxb Dopfx Ahysbc Serial No.: 340379.117 System: Pneumohydraulic power cylinder (TOX Powerpackage) Maximum Air Pressure: 6.00 bar Oil Volume (ΔV): 135 ml Equipment and Features: Enclosed, sound-insulated safety cabin with inspection window and upward-opening door Heavy-duty four-column press frame for precise parallel alignment Integrated roller feed conveyor for easy workpiece handling Pneumatic air preparation unit (pressure regulator and filter) and emergency stop button Overall Dimensions: Width: 1300 mm Depth: 1270 mm Height: 2400 mm

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 6 m Stroke: 5580 mm Pushing capacity: 20 - 40 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES. Isdpsf Dqhlofx Ahysbc

Year of construction: 2026, condition: new, ProfiStop Alpha is a simple to use auto measuring stop for high-accuracy medium-heavy timber cutting. Speed up your cutting through the roof, simply, and introduce advanced job-management functions to run your production efficiently. • High-speed automatic servo motor cut measurement • Simple operation and setup, compatible with most saws • Medium duty 20-40 kg recommended material weight • Ideal for steel, framing timber, aluminium • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Frame and truss manufacture • Pallets and boxes manufacture • Furniture manufacture • Planters manufacture • Retail timber sales Can be used with all your existing saws including: • Industrial drop saws • Guarded up-cut saws • Band saws • Radial arm saws • Drills and presses Model: ProfiStop Alpha Length: 4.5m Stroke: 4080 mm Pushing capacity: 20 - 40 kg Software: Basic Iodpfx Ahsf Dqhajysbc Supplied with a roller table or as a linear unit only for installation to your existing tables. Quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. The set includes: • a pneumatic column press with a robust, steel construction Ijdoz Sawdepfx Ahysbc • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides • a power cabinet, distribution board, and cable routing • a table on wheels with a transport brake Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Condition: excellent (used), Year of construction: 2008, input voltage: 380 V, cutting height (max.): 330 mm, cutting width (max.): 370 mm, total height: 34 mm, overall weight: 2,500 kg, cutting range round steel at 90°: 330 mm, cutting range square steel at 90°: 330 mm, saw band length: 4,430 mm, saw band width: 1 mm, For sale: a professional, fully automatic band saw for metal, manufactured by the renowned Taiwanese brand Bigstone, model CF 325 (year of manufacture 2008). Its robust construction ensures high rigidity and performance, with technology comparable to top-of-the-line models from AMADA, BOMAR, and PILOUS. Here is a short video demonstrating the machine in operation: ?is=nlNDZ9sSgcR8z4iA The machine weighs a substantial 2500 kg, guaranteeing complete vibration-free operation during cutting and ensuring perfect geometry and consistent serial production. Iedpfx Ahsxyuwnoyjbc Technical condition: The machine is in 100% working order, connected in the workshop, and ready for immediate production use. The hydraulic feed system, vise clamp, and automatic cycle function flawlessly. Technical specifications: • Maximum cutting range (square): 330 mm • Maximum cutting range (rectangle): 330 x 370 mm • Cutting blade size: 4430 x 34 x 1.1 mm (wide, stable blade) • Main motor power: 5 kW (very powerful drive) • Weight: approx. 2500 kg Equipment and logistics: • Advanced automatic control: The controller allows for full programming of the desired number of pieces to be cut. • Multiple feed function: The machine has a function for repeating the feed stroke up to nine (9) times for a single piece. This enables fully automatic cutting of very long parts without the need to manually reposition the machine stop! • Full automatic cycle (hydraulic material feed, clamping, cutting, and ram return). • Integrated cooling system and blade cleaning brush. • LOADER INCLUDED – I have a forklift on site and can ensure the safe and efficient loading of this 2.5-ton machine onto your transport. The saw can be tested in a full automatic cycle during an inspection. Price: 26,000 PLN net (+23% VAT), negotiable. VAT invoice available.

Condition: used, Year of construction: 1999, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm Weinig Unicontrol 6 with NC-controlled spindles ----- The machine was in daily operation until September 2026, at which point it was professionally dismantled and placed into storage at our facility. Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut line > NC-controlled length stop, mounted on the tenoning table; positioning of the cross-cut saw is integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable (254 mm) via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb-cut and conventional-cut capable) ----- > Position: vertical, right-hand side > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical, right-hand side > Number of tools: variable, infinitely adjustable via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable (254 mm) via NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle diameter: 232 mm > Motor power: 11 kW Item 5: Horizontal profiling milling unit (top-mounted) ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5850 rpm > Tool cutting circle diameter max. 130 mm > Axial adjustment range: 2 positions > Radial adjustment range: 2 positions Pos. 6: 3rd profiling spindle (fitting/hardware spindle) ----- > Position: vertical, right-hand side > Tool clamping length: 160 mm > Axial adjustment range: 3 positions > Radial adjustment range: 2 positions Ibsdpfxoz S N Hms Ahyoc > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-ready (online-capable) > Rebating device for splinter-free rebating > Package for processing double-part components > Return conveyor system for one-man operation: slat conveyor > Screen-based control system > Device for angled (non-rectangular) windows > Electronic angle display for angled windows > Industrial PC, PC-based control system (NEXUS) > Excludes machining tools Includes 1 set of Stehle IV68 timber window tools ----- Price for the above-mentioned machine available upon request! ----- Optional (at additional cost): EUR 6,500.00 Note regarding used tools: We currently have used "Gold" brand tools in stock (Stock No. #2790). These are window tool sets for IV78 timber and IV78 timber/aluminum systems. They ...

Condition: used, Schulz   Schulz Electronic Performance Test Cabinet with 8 × Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023   For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. The system comes from a professional laboratory application and is ideal for development, testing, burn-in, and automated test processes.   Equipment & Features:   8 × individually usable laboratory power supplies SM330-AR-22 Each power supply with precise voltage and current regulation Sequence/automatic mode for complex test sequences   Ibodpfxozix A Ho Ahyjc Large control cabinet with:   Main switch Start/Stop Emergency stop   Side grille for optimal ventilation Wheels for easy transport Network labels available (e.g., CTSK05 #01 172.25.108.201)   Technical data:   Control cabinet (SE6607X-23BA0065-1): Input: 400 VAC (Three-phase) Maximum current: 63 A   Total power: 8 × 3.3 kW = 26.4 kW   Protection class: IP20   Power supplies (Delta SM330-AR-22): Output up to approx. 330 V / 22 A   High-resolution display Fully programmable   Industrial quality – extremely reliable   Condition: used The test cabinet is in very good condition. Displays are clear, controls are clean, cabinet is stable. No visible damage.   Scope of delivery: (See image) Complete Schulz-Electronic test cabinet 8 × Delta Elektronika SM330-AR-22 power supplies Integrated control/operating section Wheels mounted   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by telephone.

Year of construction: 2006, condition: ready for operation (used), This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. • Base frame • Accessories for base frame • Hydraulic fittings • Unit carrier (left) TK420 • 108 bores • Pipe (coolant return) • Flange shaft with face gearing • Stöber servo motor with planetary gearbox • Limit switch monitoring • Protective hood • Form turning unit - material guide • Guide axis • Cover plates with empty stations • Milling unit with NC feed • Clamping with toothed belt pulley z1=16 • Toothed belt pulley Z1=16 • Toothed belt pulley Z2=20 • Toothed belt 25 AT10 / 730 • Hydraulic power unit 70 100 04358 32 dm³/min • Central lubrication • Deflection plate T - T Additional equipment • Part ejection console • Straightening and feed rollers • Clamping change parts station 1 • Tools and tool holders • Operating tools S6 • Ejector with gripper • Clamping jaws (plates) • Press-in unit for internal hexagon socket • Face turning head PCD 100-01-101 • Length control with pneumatic cylinder and laser • Reel support (Star cross) • Extension (coil height) • 2-jaw chuck • Pneumatic accessories (for 4 cylinders) Ijdpfx Ajx D If Tehyjbc • 24-volt filling unit integrated with emergency stop valve • DA 300 compressed air maintenance system

Condition: used, mileage: 46,140 km, power: 120 kW (163.15 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,200 kg, color: black, gearing type: automatic, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263298 Former non-binding recommended retail price from the automotive manufacturer: €80,640 1st owner, accident-free, regularly serviced according to service schedule, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Electric operation for left sliding door * Electric auxiliary heater * Mirror package Vito * Smoker package Ibedpfxoztuiqs Ahyjc * Tourer PRO * BlueEFFICIENCY package ASSISTANCE SYSTEMS * Blind Spot Assist * Mercedes-Benz emergency call system * Breakdown management * ECO start-stop function * Cruise control (TEMPOMAT) * Headlamp Assist * ATTENTION ASSIST * HOLD function * Active Brake Assist * Traffic Sign Assist * Active Lane Keeping Assist * Parking package with reversing camera ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC * Comfort chassis AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * 2-way speakers front and rear * Communication module (LTE) for digital services * MBUX multimedia system INTERIOR * Interior trim, high-quality finish * Lumbar support for driver's seat * Semi-automatic TEMPMATIC climate control system * Warm air duct to passenger compartment * Climate zone 1 (cold/comfort) * TPO plastic flooring in passenger compartment * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Attachment points in the roof frame * Thorax-pelvis side airbag for front passenger * Thorax-pelvis side airbag for driver * Windowbags for driver and front passenger * Fabric Caluma black * Lockable glove compartment * Seat rails with quick-release mechanism, 3 rails * Comfort roof control unit * Interior mirror with automatic anti-glare function * Airbag for front passenger * Grab handle in the rear * Interior light(s) in the rear * Comfort driver's seat * Front passenger seat, two-seater * Steering wheel adjustable for inclination and height * Armrests for seating in passenger compartment LIGHT & VISION * Window front left, fixed in side wall/sliding door * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Child safety lock on doors in passenger compartment * Keyless entry * Seat belt warning system for front passenger seat * Seat occupancy recognition for driver's seat * Anti-theft and burglary alarm system EXTERIOR * Electric operation for right sliding door * Roof lining * Heating for windshield washer system * EASY-PACK tailgate * Tinted glass in the rear, black * Metallic paint * Active sliding door locking mechanism * Sliding door, left * Exterior mirrors, electrically folding * Heat-insulating glass all around * Exterior mirrors, heated and electrically adjustable * Window, fixed, rear OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Grab handle for entry * Model series C447 Vito/V-Class * Combined vehicle * Weight variant 3,200 kg * Dry-cell battery 12 V 92 Ah * Front axle with increased load capacity * Service interval 40,000 km * Main tank 70 liters * Generator 14 V / 250 A * Signs / printed materials German * Basic * Model update * Generator management * Head unit Europe/CIS/Mongolia Further features * Model year G4-II * Digital extra: Hard drive navigation * AEJ X4/1 * Model year 5 * 3-seater comfort bench EASY-ENTRY in 2nd row in the rear * 3-seater comfort bench EASY-ENTRY in 1st row in the rear * Model generation 2 * Window in tailgate with wiper and washer system * Digital extra: Smartphone integration * Window on right, fixed in side wall/sliding

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics Iodpfxoz Rmcvs Ahyjbc - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right