Used Ink Station for sale (10,380)

Condition: good (used), functionality: fully functional, Offered is a boot cleaning system for cleaning boots and work shoes. Further details on request. Payment in cash or in advance! Djdpfxjw Tm Hie Ab Tjla Sale only to businesses. No guarantee, no warranty.

Condition: used, Used surface plate with stand Dledpfx Absw Tdfvo Tea

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Dlsdpfx Abeh Akm Te Tja

Condition: used, -Dimensions: 1100x650x865 mm -Tank size: 500 mm diameter, 150 mm depth -Serial number: C2171910002 -Manufacturing date: 10/2019 -Temperature: -30°C/-35°C Dedpfx Aow N Scbjb Tjla -Voltage: 230V -Frequency: 50Hz -Ice production: 25 L/h Nsy Tdxew N Scbsugoda -Weight: 90 kg

Condition: new, With filters 20 pieces 2 motors 15 kW Capacity 36,000 m³.h 400 V x 3 phases x 50 hrs 3 fan speeds Dljdsvu Sqljpfx Ab Tja Approximate dimensions: 5 m 3 m x 2 m Serial number: 20-1-267 Year of manufacture: 2020

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: JZ1030) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Dsdpfxel Hyfce Ab Tsla Total installed motor power Kw

Year of construction: 2016, condition: used, functionality: fully functional, The Vetaphone Corona Treatment System is used to boost surface energy before winding on film extruders, or prior to a laminating, printing, or coating process, in order to ensure good adhesion and high quality on the final product. Station VE1C-A(C4) 1920 QC, generator iCorona2-6kW, remote control TF415, ventilator RD62, transformer iHP200 6kW, 4 ceramic electrodes (not included). Dledpfx Abew I D Uye Tsa

Year of construction: 2005, condition: used, Equipment Twin Multi Disc unwind station MTD-AWS-OWK • 2 MTD-AWS-OWK Combination unwinding station • 1 MTD-ZSF-LI-MSD Dodpfx Asc Ihxrsb Tjla Stack pacer LAT • 1 LAT-2:1

Year of construction: 2019, condition: ready for operation (used), Used for autoclave sterilisation, an on-site inspection is possible. Dodpfx Ajq Rfl Nsb Tola

Year of construction: 2013, condition: not inspected (used), functionality: unexamined, controller manufacturer: Siemens, controller model: SIMATIC, No minimum price – guaranteed sale to the highest bidder! Submitting a bid constitutes an obligation to collect the item within the specified timeframe, no later than 31/07! TECHNICAL DATA Joining force: max. 60 kN MACHINE DETAILS Dimensions & Weight Machine complete, operational: 22,000 kg Base machine: 20,000 kg Pure water tank: 1,500 kg Chip conveyor: 500 kg Machine with coolant tank and chip conveyor (without chip bin) W × D × H: approx. 5.40 m × 5.95 m × 3 m Machine during maintenance (space required to open control cabinet doors): approx. 6.0 m × 6.55 m × 3 m Storage conditions Temperature: -10°C to +50°C Relative humidity: max. 80% (non-condensing) Operating conditions Temperature: 15–35°C Temperature fluctuation max.: ±2°C/12 h and 2°C/h Dljdpfx Abowyldne Tsa Relative humidity: max. 80% (non-condensing) Dust content at installation site: 1 mg/m³ Installation: in a closed, draft-free room Connection rating: 63 A EQUIPMENT With SIEMENS SIMATIC touch panel With partial conveyor belt

Condition: like new (used), Carruthers Six-pak 46000 Six station volumetric filler Dlsdpfx Aekl Hrqob Tsa Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Dljdpfx Ajt Ty A Aob Tja No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Description: Dlodpfxewx Ii Rj Ab Tja - Length of conveyor: 25 mtr - Delivery to the right

Year of construction: 2000, condition: used, Mueller Martini 351.0412 unwinding station Built in 2000 Dodpoc Ruydefx Ab Tsla

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Dodpfx Aou N Hdysb Tsla

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling Dedpoibx S Njfx Ab Tsla IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: like new (used), Carruthers Six-pak 46000 Six station volumetric filler Dljdpskl Hr Aefx Ab Tsa Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, DHP HYDRAULIC STATION LIFT - 1.5t DHP hydraulic bench jack is used for stepless lifting and lowering of material at assembly, loading and machining stations with table dimensions similar to EUR pallet, allows to maintain a constant working level when loading or unloading material. Lifting of the lift table is carried out by means of two hydraulic cylinders, powered from a compact electro-hydraulic unit, controlled from the cassette. The cassette is equipped with "lifting", "lowering" and "EMERGENCY STOP" buttons. Load capacity max kg 1500 Dimensions of the table standard mm 900x2000 Height in folded state (standard) mm ~230 Working stroke (max) mm 1100 Lifting time s approx. 30 Pressure in the hydraulic system MPa max 16 Noise level dBA approx. 72 Installed power kW 1.1 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Dedpfot Ubn Nex Ab Tsla Weight of the device kg ~450

Year of construction: 2013, condition: good (used), Sanitary Gate/Hygiene Station Elpress 12705749-83202080 Manufacturer: Elpress Cleaning Systems Model / Type: 12705749-83202080 Serial Number: 17785 Year of Production: 14.01.2013 Power Supply: 400 V / 50 Hz 16 A Rated Power: 0.1 kW Operating Pressure: 3 bar Maximum Temperature: 40°C Weight: 180 kg Dimensions: 2500x950x1550 mm Dledpfx Ajw Ht N Ssb Toa

Year of construction: 1999, condition: ready for operation (used), unwinding station Dlsdjdygu Sspfx Ab Tea Built in 1999

Condition: ready for operation (used), Year of construction: 1996, Technical data: Working width 50 cm, 2 folding pockets Dedpfxow E Rlns Ab Tjla

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description Dlsdpfx Abeh Dpxhj Toa The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Power supply: 230V 50Hz (1-phase) Dodpfjcip Sujx Ab Tsla very good condition - nearly new

Year of construction: 2000, condition: used, Lifting and turning table Year of manufacture 2000 Table size 1300 x 800 mm moves on 2 levels Dsdpfx Abjwkbaaj Tela Upper level tiltable Load capacity 500 kg Connection 400 V Availability: short term Warehouse location: Flörsheim

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Further articles - new and used - you will find in our store! International shipping costs on request! Dledpfxol Smn Ss Ab Tsa