Used Injection Unit for sale (31,736)

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Iiedpfehkztwex Afieh Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2015, 2015 | Scania R 580 HIGHLINE 6x4 150 Ton max cap | Used Tractor Unit | 416076 kms 📍Location: France, Saze 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 59300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Iiedpfexntiljx Afieh 37 inspection points 32 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A very neat truck, engine runs nicely, steers and brakes well, not all gears have been tested on the road, slight rattling noise at the gearbox not very bad, and the engine sweats a bit at the front of the oil pan, trailer that belongs to it is being sold separately by Equippo. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39028 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Iiedpfx Ajxnqausfish Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, mileage: 430,000 km, power: 397 kW (539.77 HP), first registration: 11/2021, overall weight: 20,500 kg, fuel type: diesel, axle configuration: 2 axles, empty load weight: 8,558 kg, next inspection (TÜV): 09/2025, brakes: VEB, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, front tire size: 385/55R22,5, rear tire size: 315/70 R22,5, number of seats: 2, number of beds: 2, Equipment: ABS, air conditioning, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, Volvo FH 13.540 | LED headlights | Alloy wheels | EURO6, I-Shift, full air suspension | Refrigerator, 2 tanks | Hands-free system, multifunction steering wheel | Auxiliary heater, seat heating | Electric windows, electrically heated mirrors | Full spoiler kit | Auxiliary air conditioning | Radio/CD Subject to error, input and prior sale. Iijdexnpnqopfx Afioh

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Ijdpexnmw Nefx Afisih Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Year of manufacture: 2009 Stock number: 1057

Condition: used, Year of construction: 1992, Overview  This premixer was manufactured in 1992 by the German company Jakü. The PM-E-30-2k model is designed for degassing and carbonation in beverage production and is suitable for mixing water and syrup with precise dosing control. With a capacity of 35 hl/h, it is ideal for carbonated soft drinks and other beverage applications. Technical data  Capacity: 35 hl/h Operating pressure: up to 6 bar Mediums handled: Water, syrup Pump type: Piston pumps Stroke length range: 0 – 60 mm Flow rate: Pump 1: 2,917 L/h Pump 2: 633 L/h   Iijdpfxoxnmzno Afijh

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P intake manifold: 300 mm Ijdpfx Aecdrzdofijih Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: ex stock Bitburg Subject to prior sale

Condition: good (used), High-frequency ignition device, heating, gas and oil burners, control box, combustion control, burner control Iodoxnk Eqspfx Afieih -Manufacturer: Landis & Gyr, firing control -Type: LOK16.250A27 -Dimensions: 105/105/H125 mm -Weight: 1.2 kg

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Isdoxnprcepfx Afioih Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, mileage: 77,105 km, power: 346 kW (470.43 HP), first registration: 04/2023, overall weight: 18,000 kg, fuel type: diesel, axle configuration: 2 axles, empty load weight: 8,587 kg, next inspection (TÜV): 04/2026, wheelbase: 3,600 mm, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 315/80R22,5, rear tire size: 315/8022,5, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, soot filter, truck registration, | MAN TGS 18.470 4x4 | emergency brake assistant | Euro 6, navigation system, retarder | refrigerator, sunroof | automatic, rear axle lock | multifunction steering wheel, cruise control | air conditioning, seat heating, auxiliary heating | electric windows, electric mirrors | hydraulics ex works | on-board computer | construction site tires, 315/80R22.5 | input errors, errors and prior sale with reservation Iiodpfx Afsxnpnwjijh

Year of construction: 2018, condition: used, Plant for Drawing Oil Preparation in Tube Production The plant is designed for the optimal preparation of undrawn tubes prior to the subsequent drawing process. In this process, the tubes are evenly treated in drawing oil baths, ensuring homogeneous wetting of the surface. The drawing oil bath provides uniform lubrication, which reduces frictional resistance during the drawing operation, improves surface quality, and increases tool life. The system is designed to ensure a continuous material flow as well as constant bath temperature and quality. It therefore represents a key process step in tube manufacturing and significantly contributes to both the quality and cost-effectiveness of production. Technical Specifications of the Plant Automatic Bridge Crane Type: Matr. 2981 t.6,5 Max. translation speed: 40 m/min class: A6 (FEM 1.001 – ISO) Number of wheels: 4, Ø 315 mm Crane gauge: 13,000 mm Net crane weight: 8,000 kg Motor: Type FC90LFECCL-4, power 1.5 kW, protection degree IP55 Brake: Disc type, DC V400 Gearbox: Type TP 315/90BR, ratio 1/35 Iedsxnindspfx Afioih Power supply: 400 V – 50 Hz

Condition: refurbished (used), Hydraulic variator, e.g. for the feed drive of a PRIMULTINI band saw clamping carriage, including brand-new drive motor 5.5 kW/1440 rpm, individual, manual rapid feed adjustment forwards/backwards including by-pass valve for smooth reversing when accelerating and braking the clamping carriage, with ATOS electric solenoid valve for fast and safe feed-off switching, with 280 mm Ø V-belt pulley Ijdpfjlyqbbex Afioih

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko clean air deduster Exhibit Sold at a special price Technical data Power Unit 250 P Intake manifold: 250 mm Nominal motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Iedpfx Afscdr Enoijih max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22,4 m² Spa collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Condition: used, mileage: 84,860 km, power: 375 kW (509.86 HP), first registration: 02/2024, overall weight: 18,000 kg, fuel type: diesel, color: green, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, gearing type: mechanical, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Tractor Unit 4X4 Hydrodrive MAN TGX 18.510 BL SA in Full Specification First registration 02/2024 Mileage 84,860 km Iijdowwv Urjpfx Afijh GM cab with 1 bunk, cab air suspension, swinging entry steps, 3-piece steel bumper, Light & Vision Plus safety package, driver comfort package, Plus interior lighting package, storage package, comfort driver’s seat with Alcantara/leather upholstery, heated and ventilated driver’s seat, rotatable Vario passenger seat, full LED lighting, LED headlights, LED fog lights, high beam assistant, automatic headlight control, 12.3-inch instrument cluster, MAN truck navigation, Climatronic air conditioning, auxiliary water heater, fridge under the bunk, 220-volt socket, ZF 16-speed manual transmission RETARDER and additionally reinforced engine brake EVBec Leaf/air suspension Wheelbase 3,600 mm, short and highly maneuverable Aluminum fuel tank 490 liters 2-line MEILLER tipping hydraulics, large aluminum hydraulic oil tank approx. 200 l, switchable high-/low-pressure system, Tyres Front axle 385/65 R 22.5 Rear axle 315/80 R 22.5 ALCOA Dura-Bright high-gloss aluminum rims Full safety package including active steering MAN Comfort-Steering, Lane Change Support LCS and Turn Assist, side camera system SCS and 360° view assist, ACC adaptive cruise control, EBS, ABS Off-Road with additional off-road logic, emergency brake assist, emergency brake assistant EBA, Lane Departure Warning LDW, RENTING is the new BUYING—available immediately from us with full service rental.

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5850 kg Control Unit Brand ENGEL Model n/a Injection Unit Screw diameter 18 mm Stroke volume 25 cm³ Injection pressure 2200 bar Plasticising rate max 36 cm³/s Screw speed 450 r/min Nozzle pressure 28.3 kN Clamping Unit Clamping force 400 kN Opening stroke 338 mm Ejector force for / back 20.1 kN Media Ijdexnd Rgjpfx Afieih Pump drive power 15 kW This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2022, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 18521 Iisdpfswi R S Aox Afioh Description: 2022 Dynaset KPL hardly used for sale. High-pressure water deep cleans the streets and removes sand and dust from the pores in the asphalt. Ready for delivery.

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Iodocdy I Repfx Afijih Exhibition piece - Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Iedpexnd Sqsfx Afisih Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 Iedpfxshk S S Eo Afisih With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Application Types Iodpfx Asxnd Skefieih Injection Moulding

Condition: new, Year of construction: 2025, HOLZKRAFT S 400 elite S 32 MA Professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504757 Machine equipped with : - motorized height adjustment and tilting of the saw unit - Digital display for tilting - Integrated on/off switch of the motors in the edger carriage Standard equipped with scoring unit with sepa- drive motor, adjustable from the outside - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm Iisdpfx Aji Dpgyefieh max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine subject to prior sale

Condition: new, Year of construction: 2025, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available - Iiodpfx Aeih Dwvsfijh

Condition: excellent (used), Year of construction: 2009, MC Biesse HSK 63 F angle unit with 2 outputs Instructions Wrench Iisdpfx Aowmtaqjfieh Collet Location: from stock, 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz Isdpfx Ajbpg Ncefijih - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Top price for the exhibition piece

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Iiodpscdr E Aefx Afijh Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale