Used Ingersoll Face Mill for sale (72)

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Hodpfx Aksrtrx Rj Djl Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: excellent (used), Year of construction: 2020, Ingersoll Rand D480IN-A Refrigerated air dryer Hodpsrk Rp Eefx Ak Djl 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Condition: good (used), Year of construction: 2011, Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph Hedjrk Rqbepfx Ak Dol

Condition: used, Year of construction: 2003, Ingersoll Rand ML45 air compressor (2003), 2 units available. Condition: Used, technically sound, currently disconnected. Manufacturer: Ingersoll Rand (USA) Model: ML45 Year of manufacture: 2003 Quantity: 2 units Reliable industrial screw compressors designed for the stable supply of compressed air across various industries – manufacturing, metalworking, pneumatic tools, and automation systems. Key technical specifications (according to Ingersoll Rand ML45 catalogue): - Rated power: 45 kW - Air delivery: approx. 7.5–8.5 m³/min (depending on pressure) - Working pressure: 7–10 bar - Compressor type: oil-lubricated screw - Drive: direct - Power supply: 400 V / 50 Hz - Cooling: air-cooled system Hodpfexu Achsx Ak Djl - Noise level: approx. 72 dB(A) - Compressor weight: approx. 900 kg Condition description: Both units are currently disconnected but were operational prior to shutdown. Operating hour readings are unknown. Visually – in good technical condition, no damage.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: Hjdpovwgmgefx Ak Del - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Hodpfxju Axzkj Ak Dol Good condition

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Hodpfx Aksxpvhaj Djl Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: good (used), Ingersoll Rand ML5.5 Air compressor Serial: 2121510 Hjdpfx Akjqqhtxo Dol 5.5Kw, 7.5Bar working pressure

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Technical Data and Performance The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Hsdpfxexcwx Hj Ak Dol Structure and Components A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Condition: excellent (used), Year of construction: 2009, 5-axis Machining center. X 700, Y 550, Z 450mm, HSK E50 36,000Rpm, ATC 56 Pos. Hedpfx Akswzvqbo Djl

Condition: good (used), functionality: fully functional, Ingersoll Rand Nirvana 7.5kW screw compressor Hodpfx Asw Dqtisk Dsl Overhauled equipment Can be seen operating at our premises Price includes loading of equipment Transport and installation available at extra cost.

Condition: used, Year of construction: 2014, operating hours: 80,000 h, functionality: fully functional, overall weight: 10,000 kg, power: 350 kW (475.87 HP), fuel type: electric, volume flow: 3,180 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, type of cooling: water, Equipment: documentation/manual, type plate available, Operational frequency-controlled turbo compressor up to 53,000 liters per minute Hodpew N Hdysfx Ak Dol

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] Hjdpfxeuhbtkj Ak Dol EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit - Tool probe : BLUM

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Hedpfx Ajwx Nltsk Dol Control: Heidenhain ITNC 530 Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Spindle type: SK50 / Gearbox spindle Four attachment heads Internal spindle cooling: Yes Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. Hedpfxow Ig A Hs Ak Del 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: good (used), Year of construction: 2008, Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from Ingersoll Rand – model TS3A, built in 2008. Technical specifications: Max. air pressure: 12 bar (175 psig) Max. air inlet temperature: 60°C (140°F) Cooling system: Air-cooled Operating voltage: 400V / 3Ph / 50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Hedpfx Akjxl D Adj Dsl Refrigerant oil type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Hodpfowric Esx Ak Dol

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 750 mm, table length: 650 mm, TECHNICAL DETAILS Version: Lifting Tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Programmable/automatic dielectric fluid height: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Load capacity: 1,000 kg Travel Paths X / Y / Z (within working tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control System PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min Min. distance between electrode clamping system and work table: 135 mm Max. distance between electrode clamping system and work table: 585 mm C-Axis Adjustable rotation speed: 1-20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Max. electrode moment of inertia: 0.4 kgm² MACHINE DETAILS Hedow T Tg Nopfx Ak Dol Dimensions (W x H x D) with generator: 2600 x 2680 x 2290 mm Space requirement with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Connected load: 16 kVA Fuse protection: 32 A Supply voltage/frequency: 400 V / 50 Hz Operating hours: 2,001 h

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Hjdpew I Sm Dsfx Ak Del Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 655050, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel paths Travel X-axis: 550 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse (X/Y/Z): 60 m/min Spindle Speed: max. 42,000 rpm Tool system Tool holder: HSK 40 E Tool positions: 32 Table Table size: 650 mm × 500 mm Table load: max. 500 kg MACHINE DETAILS Drive power: 15 / 17 kW Control: Andronic 2060 Dimensions & weight Required space (L×W×H): 2.58 m × 1.9 m × 2.26 m Machine weight: 7,200 kg Hjdpfx Ajxwc Hrjk Del EQUIPMENT Measuring probe Electronic handwheel Erowa zero-point clamping system

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 573385, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table load: 1,000 kg, Die-sinking EDM machine with MultiChange IMC4 TECHNICAL DETAILS Travel X-axis: 525 mm Travel Y-axis: 400 mm Travel Z-axis: 450 mm Y-position electrode changer: 675 mm Drive: AC servo motors, digital Rapid traverse: 2 m/min Digital resolution: 0.001 mm C-axis: 1 - 20 rpm Load capacity with/without changer: 15 / 50 kg Worktable: 730 x 630 mm Load: max. 1,000 kg Dielectric tank: 400 l Filter surface area: 4 m² Lifting tank: 750 x 650 x 420 mm Dielectric height: 375 mm IMC 4 Electrode magazine: double magazine Number of electrodes: 182 Hodpfxsxwktto Ak Dol Gripper: dual gripper Workpiece pallet magazine: 8 units Size per workpiece: 320 x 320 x 240 mm (alternative) MACHINE DETAILS Main dimensions: 2.2 x 2.15 x 2.54 m Weight, ready for operation: 4.8 t Connected load: 7 kVA IMC 4 Footprint: 2,800 x 4,101 mm Connected load: 11.6 kVA

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 575650, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, TECHNICAL DETAILS Design: Lift tank Internal dimensions (W x D x H): 800 x 1100 x 480 mm Dielectric height programmable/automatic: max. 450 mm WORKING HEAD On ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Adjustable rotation speed: 1 - 20 rpm Measuring resolution: 0.001 degrees Load capacity with manual electrode change: 50 kg Load capacity with automatic electrode change: 15 kg Holding torque/clamping force: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (inside work tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialog: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Hsdpfx Aew T Thmek Del Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) including generator: 2760 x 2730 x 2940 mm Footprint with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h