Used Index Er 25 for sale (130)

Condition: used, CNC lathe INDEX ABC Dksdszwqtmspfx Albst

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D Djdpswzynqofx Albjkt spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Dsdpjzu Sz Tjfx Albjkt

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Djdpfxjx Tum So Albokt

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Dodou T Rgkspfx Albskt

Year of construction: 1995, condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Dsdpfetdwwmox Albskt

Year of construction: 2003, condition: ready for operation (used), Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. Dkedjtdwwqjpfx Albot

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Djdpeym Dgmjfx Albokt

Year of construction: 2004, condition: ready for operation (used), Two identical Index CNC lathes including peripheral equipment and accessories are available. Main spindle: D90/Size 8, max. main spindle bore: 90mm, max. workpiece diameter: 340mm, max. workpiece length: 450mm, max. workpiece weight: 100kg, speed: 4200rpm, power: 35.5kW, torque: 550Nm, front bearing diameter: 140mm, clamping stroke: 32mm, clamping pressure: 80bar, travel X/Z: 1500mm/340mm, rapid traverse: 30m/min, feed force: 8kN, tool stations 1/2: 10/10, mounting plate dimensions X/Y: 300mm/490mm. Including coolant system, tool holders, clamping equipment and angle toolholders. Documentation available. An on-site inspection is possible. Expected to be available from autumn 2026. Individual sale possible. Dsdezkld Tjpfx Albekt

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Dksdpfx Alezuc T Tjbst Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: used, Year of construction: 2007, machine/vehicle number: 511966, Turning length: approx. 400 mm, bar passage: 60 mm, counter spindle, 2 x 14-position tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar feeder MBL 65/3700, the machine requires repair; repair costs according to the cost estimate: approx. €1,880.00 net; drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Dodszqy U Hspfx Albjkt

Condition: used, Year of construction: 2007, machine/vehicle number: 511979, Turning length: approx. 400 mm, bar passage: 60 mm, Y-axis, counter spindle, 2x 14-station tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar loader MBL 65/3700, machine requires repair, gear pump defective, repair costs according to quotation: approx. €6,000.00 net, drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Dksdpfozqy Uyjx Albot

Condition: used, Year of construction: 2007, machine/vehicle number: 402235, Spindle bore: 36 mm, maximum spindle speed: 7,000 rpm. C-axis, 1 turret, X/Z-axis, 7-station + synchronized spindle, driven tools, 1 tool turret, X/Z-axis, 6-station, driven tools, control system: INDEX C 200-4 D, back-side machining, workpiece removal, conveyor belt, chip conveyor, bar loader MBL 52/3200. Drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Dkedpfx Alezqy U Tjbst

Condition: good (used), Year of construction: 2014, See documents. Dedpfx Alozqtg Aebskt List of individual machines with operating hours, etc. – see documents.

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 20/27 [kW] Dkedpeuhacdjfx Albot - Spindle speeds : 6300 [rpm] - Max. bar diameter : 42 [mm] - Max. diameter on bench : 200 [mm] - Max. chuck diameter : 160 [mm] - C axis indexing precision : 0.001 [°] UPPER TURRET * Number of positions : 12 * Number of motorized positions : 12 - Tool type : VDI 25 * Live tools speed : 6000 [rpm] * Live tools power : 8 [kW] LOWER TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 110/800 [mm] - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5,5 [kW] TAILSTOCK - Tailstock type : Numérique POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 43 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4435x1950 [mm] - Machine height : 1930 [mm] - Machine weight : 7500 [kg] EQUIPMENT - CNC : INDEX C200-4D - Linear scales - Coolant tank * with high-pressure pump : 80 [bars] * with paper filtering unit - Chips conveyor - Oil mist extractor - Chuck 3 jaws

Condition: used, TECHNICAL DETAILS Dkodpouhantsfx Albet - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/38 F - coolant tank KNOLL Dksdpsuhar Eofx Albet * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - Spindle power : 10,5 [kW] - Spindle speed : 10 000 [Rpm] - Spindle type : A2-4 - X/Y/Z strokes : 280/280/145 [mm] - Rapid traverse : 50 [m/min] - Loading zone X/Z strokes : 110/90 [mm] - Number of tools : 8 - Live tools speed : 6000 [Rpm] - Live tools power : 9,5 [kW] - Tool type : Capto C4 Dkedpfouhbgwsx Albst - Dimensions : 1700 x 3000 x 2400 [mm] - Weight : 4000 [kg] - Total installed power : 2,5 [kW] EQUIPMENT - CN Siemens 840D - Axis C

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 53 / 68 [kW] - Spindle speeds : 3000 [rpm] Dsdpfx Aouhbpfelbokt - Max. bar diameter : 102 [mm] - 1 - Saisie libre : 2000 [mm] - Max. chuck diameter : 420 [mm] - Rapid traverse rate : 30 [m/min] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle power : 50 / 70.5 [kW] - Spindle speeds : 3000 [rpm] - Max. bar diameter : 102 [mm] - Rapid traverse rate : 30 [m/min] - C axis indexing precision : 0,001 [°] UPPER LEFT TURRET - Number of positions : 12 - Number of motorized positions : 12 - Tool holder type : VDI 40 - X/Z stroke : 320 x 2.000 [mm] - Y stroke : 210 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 17 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - Tool holder type : VDI 40 - X/Z stroke : 210 x 2.000 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 11.3 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 137 [kW] WEIGHT & DIMENSIONS - Machine floor space : 9.000 x 3.500 [mm] - Machine height : 3.000 [mm] - Machine weight : 21.000 [kg] MACHINE HOURS - Number of working hours : 34274 [h] EQUIPMENT - CNC : INDEX C200-4D (Siemens 840D) - Coolant tank : KNOLL * with high-pressure pump : 80 [bars] * with paper filtering unit - Automatic doors - Chips conveyor : Droite

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] Dedpfxjzgx Ahs Albjkt WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Condition: used, Cnc multispindle lathe INDEX MS16C Dedpeztk A Hjfx Albjkt

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE Dsdpfxsu Hadho Albjkt - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 60 [mm] - C axis indexing precision : 0.001 [°] - Z stroke : 445 [mm] TURRET 1 - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 105/400 [mm] - Y stroke : 120 [mm] - B Axis stroke : +90/-270 [°] - Tool type : VDI 25 - Live tools speed : 6000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4.975 X 2.890 [mm] - Machine height : 2.050 [mm] - Machine weight : 4800 [kg] EQUIPMENT - CNC : Siemens 840C - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 6 - Number of turrets : 3 MAIN SPINDLE - Spindle power : 29 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 4.2 [kW] - Spindle speeds : 4500 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 280 [mm] UPPER LEFT TURRET - Number of positions : 5 - Tool type : VDI25 UPPER RIGHT TURRET - Number of positions : 8 - Number of motorized positions : 8 - X/Z stroke : 90/280 [mm] - Tool type : VDI25 - Live tools speed : 4500 [rpm] - Live tools power : 4.2 [kW] LOWER LEFT TURRET - Number of positions : 6 - X/Z stroke : 81/80 [mm] POWER SUPPLY - Supply voltage : 400 [V] Dkedpfouhac Djx Albst - Total installed power : 35 [kW] EQUIPMENT - CNC : INDEX C200-4 - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Collet chuck

Condition: used, TECHNICAL DETAILS - number of spindles : 6 - max. bar diameter : 18 [mm] - slide unit 1.1 : X and Z axes controlled by CNC - slide unit 1.2 : Z axis controlled by CNC - slide unit 2.1 : Z axis controlled by CNC - slide unit 2.2 : X and Z axes controlled by CNC - slide unit 3.1 : X and Z axes controlled by CNC - slide unit 4.1 : X and Z axes controlled by CNC Dsdpfsuhan Tjx Albekt - slide unit 5.1 : X and Z axes controlled by CNC - slide unit 6.1 : X and Z axes controlled by CNC - slide unit 6.3 EQUIPMENT - CNC SIEMENS 840D - Counter spindle - Bar loader IEMCA SIR MS18/33 P - Coolant tank KNOLL * with high-pressure pump - Chip conveyor KNOLL - Parts catcher - Ejection of workpiece

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL Dksdpfxeuhatpj Albjt - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer