Used Index C 200 for sale (143)

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t Iajdpfxst Hw Ate Ah Njl dimensions of the machine ca. m

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX Iajdpfx Ahevh Naqo Nsl total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Iajdpforqzzpex Ah Nol Magazine: IEMCA 3300 mm capacity bar feeder

Condition: good (used), Year of construction: 1997, feed length X-axis: 70 mm, feed length Z-axis: 140 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, type of input current: three-phase, number of spindles: 6, spindle speed (max.): 5,000 rpm, collet bore: 42 mm, bar diameter (max.): 42 mm, power: 72 kW (97.89 HP), overall weight: 10,500 kg, Equipment: documentation/manual, multi spindle Iodpfxjlp Nr As Ah Nsal

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 080005, • Turning diameter over slide: 1920 mm • Axis height: 1300 mm • Center distance: 2000 to 30000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2119 mm • Spindle speed: 1–500 rpm • Gear ratios: 4 • Spindle end: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (can be extended up to 610 mm) Isdpewab Rdofx Ah Nsal • Turret type: servo, 4 or 10 positions • Tool cross-section: 50/40 mm • X-axis travel: 1200 mm • Z-axis travel: 2000 to 30000 mm • X-axis ball screw: 63 mm x P10 • Ball screw in Z axis: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (possible up to 360 mm) • Tailstock quill extension: 250 mm (possible up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Condition: good (used), Year of construction: 1997, Index ABC Year of manufacture 1997 Machine number 400621 Spindles: 1 Max diameter: 50 mm turrets: 2 Positions: 8 on turret 1 / 6 on turret 2 Iedpfxehd U Hfs Ah Nsal C axis is programmable 1 synchronous spindle in the machine + 2 for regeneration High pressure pump: yes, 30 bar

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device Iasdpfjt Hw Suox Ah Nol * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min Iaodot U R Hzjpfx Ah Njl max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: ready for operation (used), Turning diameter over bed/bed slide: 600mm/320mm, turning length: 820mm. Including parts catcher, steady rest and tailstock. Expected to be available from the beginning of 2026. Iaodpst Tfaaofx Ah Nsl

Condition: used, Year of construction: 1996, functionality: fully functional, turning length: 800 mm, turning diameter: 280 mm, spindle bore: 65 mm, travel distance X-axis: 310 mm, travel distance Z-axis: 870 mm, spindle motor power: 22,000 W, rotational speed (max.): 4,000 rpm, total height: 2,200 mm, total length: 4,100 mm, total width: 2,000 mm, overall weight: 4,600 kg, swing diameter over bed slide: 400 mm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are happy to assist you with your inquiries by phone. Iaedpfxow Nn Elj Ah Nel

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm Iedpfx Ahowzynqe Njal turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. Iaodpfxsqhkuks Ah Njl The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement.

Condition: new, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Iaodpfxjwcq Tye Ah Njl Storage traces

Condition: excellent (used), Year of construction: 1990, 1 x multi-spindle automatic lathe Index MS 25 Year of manufacture: 1990 with loading magazine Iemca PRA 40/33 P Iaodpfx Aeu Hgduoh Njl Lots of accessories. The machine can be viewed under power.

Year of construction: 1976, condition: ready for operation (used), Max. turning diameter: 500mm, max. turning diameter over bed/bed slide: 600mm/315mm, speed: 4000rpm, max. slide travel: 500mm, rapid traverse: approx. 10m/min. Tool slots: 2x8, tool holder: VDI 3425, tool size: 20, max. bar diameter: 65mm, max. thread pitch: 2000mm. Documentation available. The machine has a damaged gearbox. Iodpfx Ahot Td U Nj Njal

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, turning length: 1,250 mm, spindle diameter: 90 mm, number of slots in tool magazine: 24, Recently renewed (January 2024): Guides Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cable and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle clearance HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: taper no. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Iedpsvitznsfx Ah Njal Axes: XYZB Stations / of which driven: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / of which driven: 12 / 6 Coolant system Type: Knoll system with paper belt filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chuck - Numerous turning and drilling attachments with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4 radial and axial - Numerous fixed holders CDI-Capto C4 radial and axial

Condition: new, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball Screw Item ID: 10912112 Previous Item ID: GM2602.1551 Iaedpfx Ajwb Evmoh Nol From stock/wear - Offer as shown in pictures -

Year of construction: 2002, condition: ready for operation (used), A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible. Isdjwr Dw Rjpfx Ah Neal