Used In-House Exhibition for sale (33,833)

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 35,432 mm Number of bays per rack row: 10 Number of levels plus floor level: 2 Technical data for volume: Pallet spaces per bay: 9 Number of pallet spaces per row: 120 Total number of pallet spaces: 120 Based on: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 11x pallet rack uprights, used Material color: blue Frame profile: MX610 Profile dimensions: 76.2 x 63.2 x 1.8 mm Incl. cross and diagonal braces, Footplates Dedowk A Thjpfx Ab Tjwf The uprights are pre-assembled (screwed framework) Height: 2,250 mm Depth: 1,050 mm 40x pallet rack crossbeams, used Material color: yellow Box profile: 140 x 40 mm Crossbeam type: N140x40 SEG Hooks: 5 hooks Clear width: 2,705 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 80x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 44x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 22x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition, the machine comes from a very small joinery workshop that was closed due to retirement. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1997. The fence on the moulder allows adjustment of the fence jaw depth, with fine adjustment and a mechanical counter; this makes it possible to perform trimming work, e.g. on a gluing profile. The entire fence can also be moved in depth using a handwheel and leadscrew, and a second mechanical counter allows for highly precise and quick settings. Dwodpfx Aoxy S Eieb Tsf Equipped with spindle lock via lever. Chip extraction is excellent, with 2 extraction ports: 125 mm at the fence and 100 mm at the machine table. Comes with a 30 mm spindle, infinitely tiltable from -5° to 45°. The spindle tilt is electrically controlled with a highly accurate display. Features right/left rotation. Nationwide delivery and on-site demonstration within Germany by us for €220, so you have no risk when purchasing. Shipping to Austria and the rest of the EU possible on request. Large table opening up to 480 mm, reducible with various rings (enabling the use of cutters with very large diameters; also ensures safe operation with small cutters). Spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with a very precise display. The table is made of heavily ribbed grey cast iron. Exchangeable spindle (a 40 mm spindle can also be used). Very robust, durable construction – built for the heaviest milling operations; suitable for all milling tasks. Optimal power transmission via V-belt drive. Comes with manual/operating instructions. Includes 3-roller power feed HOLZ HER, type 1117. The power feed has right/left operation and 8 speeds. The feed rollers are individually mounted. The machine table is 1180 mm wide and 800 mm deep, plus 2 table extensions on the left and right (each 600 mm wide); there is also a pull-out support. Ready to use immediately. 380V, 5000W and 6000W thanks to 2 speed settings. Equipped with all necessary safety devices, motor brake and emergency stop. The machine is certified by the woodworkers’ employers’ liability insurance association and has a CE mark. The machine weighs approx. 1200 kg. With motor protection switch against overload. Professional machine, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Dwjdpsm Nntyjfx Ab Tef Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P Dwedpfx Ajwu Ahgob Tef

Condition: excellent (used), Year of construction: 2022, total length: 3,600 mm, total height: 11,500 mm, load capacity per storage section: 2,200 kg, For sale: pallet racking by AR RACKING in excellent condition. 450 frames (11500x1100mm) and 4500 beams (3600mm), 2200kg per level. Dedpjxvqakefx Ab Towf

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 Dwjdpfxotvau Hj Ab Tof TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Dwodpfx Aowbqh Usb Tef Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 14,135 mm Number of bays per rack row: 5 Number of levels plus floor level: 5 Technical specifications for volume: Pallet spaces per bay: 18 Number of pallet spaces per row: 90 Total number of pallet spaces: 90 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in delivery: 6x pallet rack uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50/50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm 50x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA116x40|SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 100x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Dsdsmmuq Ispfx Ab Tewf Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS 2 AXIS MITUTOYO DIGITAL READOUT Dedpfoxcn Huex Ab Tewf 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet racking beam, used Material color: yellow Box profile: 115 x 40 mm Agraffe: 4 hooks Clear width: 1,100 mm 02x locking pins, used Version: completely galvanized For securing the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately Dwodpfx Aotp Tb Tob Tof depending on the place of delivery or scope of delivery.

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Demonstration machine, year of manufacture 2023 Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Dwsdowrkctopfx Ab Tof Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR POWER TAIL STOCK Dedpfxotvav Ij Ab Towf TURRET TOOLING

Condition: good (used), The scope of delivery includes: 01x inserted grating, used Material color: hot-dip galvanized Total depth: approx. 1,035 mm (support bar direction) for stand depth: approx. 1,050 mm Total width: approx. 1,335 mm (cross bar direction) Clear span: approx. 942 mm Mesh width: approx. 68 x 45 mm Support bar: TS35/2.00 Support: approx. 45 mm Internal designation: GR-99 Weight / piece: approx. 19.30 kg Note: The grating may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dsdpfx Abovq Nbtj Tewf General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Dwedpfxemr Hpcs Ab Tjf Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK Dedpoxnpp Isfx Ab Towf BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

Condition: good (used), Technical specifications for the pallet rack crossbeam: Shelving system: Jung Heinrich Type: Esmena Included in delivery: Dedpfjwbda Dex Ab Towf 1x pallet rack crossbeam, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA116x40|SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Dwedpfxjwzzzfs Ab Tof Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: used, Year of construction: 2015, HAAS SUPER MINI MILL VERTICAL MACHINING CENTRE MAKE HAAS, MADE IN USA MODEL SUPER MINI MILL YEAR 2015 CONTROL HAAS NEXT GENERATION TABLE SIZE 914.0 mm x 305.0 mm TRAVERSES (XYZ) X AXIS: 406.0 mm Y AXIS: 305.0 mm Z AXIS: 254.0 mm SPINDLE SPEED 10,000 RPM SPINDLE TAPER BT 40 ATC 10 Dwjdexfazpepfx Ab Tof PLUS HIGH SPEED SPINDLE COOLANT SYSTEM SPINDLE TOOLING FULL SET OF MANUALS FULLY FUNCTIONAL ONE PREVIOUS OWNER

Condition: good (used), Technical data for the shelf connector: Shelving system: SLP The scope of delivery includes: 01x shelf connector, used for shelf spacing: 310 mm Dwodpfx Abovuxy Ts Tjf Total length: 310 mm Cross section: L 25 x 25 mm Material thickness: approx. 3.00 mm Material color: orange Drill hole diameter: 13 mm Weight: 0.460 kg | piece 04x screws M10 x 35 mm 04x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Racking system: Jung Heinrich Type: Esmena Dedpfx Absw Upxwo Tjwf Scope of delivery includes: 01x Pallet rack beam, used Material color: green Box profile: 155 x 55 mm Claw: 4 hooks Clear span: 3,610 mm 02x Safety pin, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be individually inquired at our company depending on the delivery location and scope.

Condition: good (used), Technical Data for Pallet Rack Beam: Racking system: Jung Heinrich Type: Hubertus Included in the scope of delivery: 01x Pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 100 x 50 mm Connector: 2 hooks Dsdow U Dlfspfx Ab Tswf Clear span: 1,800 mm 02x Safety pins, used Finish: Sendzimir galvanized For securing the cross beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipment of this item is desired beyond this, additional costs will apply, which can be requested from us depending on the place of delivery and scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking system: Jung Heinrich Type: MPB Technical Data for Installation: Number of rack rows: 01 pc. Length per rack row: 64,980 mm Number of bays per rack row: 23 pcs. Number of levels incl. ground level: 06 pcs. Dedsw Rnvaspfx Ab Tjwf Technical Data for Capacity: Pallet spaces per bay: 21 pcs. Pallet spaces per rack row: 483 pcs. Total pallet spaces: 483 pcs. Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Max. weight per pallet: 400 kg Scope of Supply: 24x pallet rack uprights, used Colour: blue Upright type: STD'DB'30 Profile dim.: 120 x 92.5 x 2.5 mm Incl. horizontal and diagonal braces, base plates Uprights are pre-assembled (bolted lattice structure) Height: 11,500 mm Depth: 1,100 mm 276x cross beams, colour: RAL 1007 daffodil yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,700 mm Max. load per beam pair: 1,200 kg with evenly distributed load 552x safety pins, used Material finish: sendzimir galvanized For securing the longitudinal beams against accidental lifting 96x stud anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 48x leveling shims, used Finish: fully galvanized For leveling rack uprights installed on uneven floors 01x load capacity sign with indication of bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only available for collection. Any transportation or shipping required beyond this is subject to additional charges, which can be quoted upon request depending on delivery location and scope.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: MPB Technical Data for Installation: Number of racking rows: 1 unit Length per racking row: 40,300 mm Number of sections per row: 14 units Number of levels plus ground level: 6 units Technical Data for Volume: Pallet positions per section: 21 units Pallet positions per row: 294 units Total pallet positions: 294 units Based on: Load carriers: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: 400 kg Scope of delivery includes: 15x Pallet racking uprights, used Material colour: blue Upright type: STD’DB’30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted truss construction) Height: 11,500 mm Depth: 1,100 mm 168x Material colour: RAL 1007 narcissus yellow Material colour: yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,750 mm Maximum load per pair of beams: 1,200 kg (uniformly distributed load) 336x Safety pins, used Material finish: sendzimir galvanized For securing the longitudinal beams against unintended lifting 60x Anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Specification: carbon steel, galvanized Approved for: cracked concrete 30x Leveling shims, used Specification: fully galvanized For leveling racking uprights installed on uneven floors 1x Load sign With details of bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dwjdpfsw Rqurex Ab Tjf General information about the item: This item is offered for collection only. Any requested transport or dispatch of this item is subject to additional costs, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for pallet racking system: Racking system: Jung Heinrich Type: MPB Technical data for installation: Number of racking aisles: 01 unit Length per aisle: 36,300 mm Number of bays per aisle: 09 units Number of levels plus floor level: 06 units Scope of delivery includes: 10x pallet racking frames, used Frame colour: blue Frame type: STD 'DB' 30 Profile dimensions: 120 x 92.5 x 2.5 mm Including horizontal and diagonal braces, foot plates The frames are preassembled (bolted truss design) Height: 11,500 mm Depth: 1,100 mm 108x pallet rack beams, used Beam colour: yellow Box profile: 160 x 50 mm Connector: 4 hooks Clear span: 3,900 mm 216x locking pins, used Finish: sendzimir galvanized For securing the beams against accidental lift-out 40x expansion anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Dwsdpfxow Rkghj Ab Tof Design: carbon steel, galvanized Approved for: cracked concrete 20x shim plates, used Finish: fully galvanized For levelling uprights placed on uneven floors 01x load sign With information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will be incurred, which can be quoted separately depending on the place of delivery and scope of delivery.

Condition: good (used), Included in the scope of delivery: Dwedpfx Aoxdcxhjb Tef 01x Used Z-bracket Manufacturer: Dexion Total width: approx. 100 mm Bearing surface: approx. 47 mm Short flange: approx. 27 mm Long flange: approx. 38 mm Material thickness: approx. 1.50 mm Weight per piece: approx. 0.130 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is required beyond this, additional costs will apply, which can be requested from us separately depending on the place of delivery and scope of delivery.