Used Immersion Pump for sale (9,110)

Condition: used, Nordson Problue 7 Hot Melt Pump Model Problue 7 Guodpfxewq S Eys Af Teh

Year of construction: 2000, condition: used, Landini Water Pump • Model CU5/A • Output 84 m³ • Power 50 HP • Max. pressure 10.4 bar • Not self-priming • Three-point hitch • Suction hose Gedpfx Ajz Rxlpef Teuh • PTO-driven pump with single impeller for high pressure. Specially suited for small irrigation reels. • Comes with hoses and sprinklers Condition: Used Year of manufacture: 2000

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Godpfx Afsy U U Tus Tsuh Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Gujdsxv Apwepfx Af Tsh Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Gedpfxsz Slq No Af Touh Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. The listed price is for 1 piece.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Gsdpfx Afsz Nkuae Touh Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: excellent (used), For sale: DDR motor pump. - 800 l/min - 28 hp - In very good condition. Gsdpoz Sk H Ajfx Af Tsuh

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 84.5 kW (114.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,016 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 92 kW (125.09 HP), Aircooled chiller/Heat pump DAIKIN EWYQ085G XR036 84.5 kW / 92 kW Cooling capacity: 84.5 kW / 24.03 tons (12/7 — 35°C) Heating capacity: 92 kW / 26.16 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP235KCE-TWD-522 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs . Hydraulic module: 2 pcs. water pump Lowara CIE370/1V/D. Dimensions: 2.83x1.2x1.8 m Weight: 1016 kg Working hours: 10380/468 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available Gsdpfszxdacsx Af Tsuh - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 1977, condition: used, Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year built: 1977 Material: mild steel Driving force: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 liters/min Operating pressure: 100 bar Operating voltage: 380/660 V Type of protection: 44 Gjdpjh Unlkjfx Af Tsuh Flanges: DN 65 Condition: Used Message: Frequency range: 50 Hz, protection class: 44, flanges: DN 65 Price: on request

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force Guodoz Sl Dpepfx Af Tsh • Proven HURST technology • Complete set – ready for immediate use

Condition: good (used), Year of construction: 2021, functionality: fully functional, cooling capacity: 90.3 kW (122.77 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,375 kg, input voltage: 400 V, total width: 1,550 mm, total length: 2,250 mm, total height: 2,460 mm, warranty duration: 6 months, heating capacity: 105 kW (142.76 HP), Aircooled chiller/Heat pump GALLETTI EVI092HS2ASP01 90.3 kW/105 kW Cooling capacity: 90.3 kW / 25.68 tons (12/7 — 35°C) Heating capacity: 105 kW / 29.86 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module. Economizer. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH146K1P-TWD-477 (scroll, soft starter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump EBARA 3M4E/E 40-160/0,55R SCA IE2 (Frequency inverter), expansion vessel. Dimensions: 2.25x1.55x2.46 m. Weight: 1375 kg. Working hours: 2034/1846 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Guodszwt S Eepfx Af Tjh WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), functionality: fully functional, Two KSB ETANORM SYT horizontal single stage centrifugal pumps, model ETNY 080-065-160 SG DB25LD20125. Mounted on metal base frames and driven by three phase electric motors with guarded couplings. Indicated nominal data: flow rate of 105 cubic metres per hour, total head of 28 m, operating speed of 2,958 rpm and diameter of 160 mm. One unit was manufactured in 2018 and the other in 2020. ATEX II 2G execution. Each pump incorporates an EagleBurgmann TS1016/A007-00 double mechanical seal manufactured in 2020, with an 8 litre jacket volume, 0.2 litre tube volume, maximum allowable pressure of 16 bar, test pressure of 28 bar and temperature range from minus 60 to plus 200 degrees Celsius. The system includes instrumentation, auxiliary piping, reservoirs, R. STAHL explosion proof local electrical control panels and a support structure. Gjdez R Azuepfx Af Tsuh

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Gedjz Nydwspfx Af Teuh Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Guodpez Nyd Djfx Af Tsh (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 184 kg, total length: 1,100 mm, total width: 400 mm, total height: 660 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 42 A, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, protection type (IP code): IP55, KSB Pump ETABLOC ETB 125-100-315 GGsAV66D301854B PD2M Single-stage, volute casing pump in block design with a motor-integrated frequency converter. Year of manufacture 2021 (operated for only 1 year; a higher flow rate was required, which is why the pumps were replaced). Equipped with a PumpDrive 2/PumpDrive 2 Eco frequency converter. Self-cooled frequency converter with a modular design, enabling stepless speed control of asynchronous and synchronous reluctance motors via analog standard signals, fieldbus, or control unit. Four pumps are available for sale. Individual sale is possible. The price is per pump. Supply voltage: 400 V Power: 18.5 kW Current consumption: 42.0 A Pump speed: 1500 rpm Medium: Ethylene glycol-based antifreeze, inhibited, closed system, e.g., Antifrogen N or comparable products. Gjdpfxsz I R Rks Af Touh Main pump connections: Suction nozzle DN 125 / PN16 Discharge nozzle DN 100 / PN16

Condition: good (used), Year of construction: 2001, Air-powered airless pump on a pump cart The T2001 piston pumps are robustly designed, air-powered airless pumps developed for conveying, transferring, and spraying with multiple guns. The parts in contact with the material are made of stainless steel, hard metal, PTFE, or PE. An ATEX approval for use in potentially explosive areas completes the picture and makes the pumps versatile. Below, you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during conveying and spraying - Versatile due to stainless steel, hard metal, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy start-up thanks to a self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump carts - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Gsdpfxert Uy Ns Af Touh Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction height (empty pump): 1.5 m water column Suction height (filled pump): 6.5 m water column Material temperature: +10 to +85 °C Maximum stroke frequency (short-term): 50 strokes/min Maximum stroke frequency (continuous): 20 strokes/min Maximum material overpressure: 6 bar Gear ratio: 60:1 Volume per cycle: 270 ccm Permissible operating overpressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4“ Material outlet: G3/8“ Material inlet: G1″ Weight: 45 kg Customs tariff number: 8424 8970 Year of manufacture: 2001 New price: 13,600 € including VAT You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, NMNE 40 872 317 NMNE 40EA596 376 Stainless steel pump housing with screw Hygiene version with bearing housing Stator NEMO LASI S65l d11027327001 Motor 7.5 kW, 1425 rpm / 250 rpm Gujdpez Rnzasfx Af Tsh Inlet DN50 (± 400mm) Outlet connection DN 30 (± 400mm) Dimensions: (L x W x H): ± 2.400 x 500 x 600 mm

Condition: used, functionality: fully functional, Year of construction: 1999, ASTRA HD7 84.42 CIFA Concrete Pump Truck, 28 m First registered: May 7, 1999 – Euro 2 Mileage: 143,370 km Guedpfx Ajz Ni Nief Tsh Operating hours: 2,692 CIFA Magnum Metro 28 concrete pump (28 m boom) Tires: 50–60% tread Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Facility to connect up to 6 hoses Godpfx Afewq Suuj Touh 10kg Tank Capacity

Year of construction: 2020, condition: used, Pump set on wheeled chassis    • 4'' suction connection    • 4'' discharge connection Guodpfx Afjz Rw Ivo Tjh    • Equipped with hand pump    • Incl. suction hose Condition: Used Year of manufacture: 2020

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 465 kW (632.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,059 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,800 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 560 kW (761.39 HP), Aircooled chiller/Heat pump CARRIER 30RQ0522 0157 PEE 465 kW/560 kW Cooling capacity: 465 kW / 132.22 tons (12/7 — 35°C) Heating capacity: 560 kW / 159.23 tons (40/45 —7°C) Year of manufacture: 2011 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. Danfoss SH300A4ACB (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. + 2 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump WILO DL65/170(163)-11/2 Carrier, expansion vessel. Dimensions: 4.8x2.3x2.4 m. Weight: 5059 kg. Working hours: 448/457/454/119/835/772/771/760 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Gsdpfsybbgtsx Af Touh The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Submersible slurry pump for drainage. Guedpfx Afjzcn Uto Teh

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. Guedpfx Afjz Sl Eto Toh ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 488 kW (663.49 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,495 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,850 mm, total height: 2,560 mm, warranty duration: 6 months, heating capacity: 570 kW (774.98 HP), Aircooled chiller/Heat pump EMICON PAE 4902 S KC 488 kW / 570 kW Cooling capacity: 488 kW / 138.76 tons (12/7 — 35°C) Heating capacity: 570 kW / 162.08 tons (40/45 —7°C) Year of manufacture: 2013 Options: Heat pump. Hydraulic module. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP385KCE-TWD 522 (scroll) + 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB431 (scroll) Type of refrigerant: R410a Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Wilo DL80/160-11/2, expansion vessel. + 1 pcs. water pump Wilo IPL65/170-1.1/4 (Recuperation) Dimensions: 4.85x2.3x2.56 m Weight: 4495 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Guodpfowwr I Iox Af Toh Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Operating hours: 392 h, condition: used, Cogem engine-driven pump set 3''    • Maximum capacity 70 m3/h    • 125-liter tank Guodpfxjz Rw Nmj Af Teh    • Electric start    • Complete with suction hose Condition: Used Year of manufacture: 0