Used Hyundai Robex 250 Lc 7 for sale (171)

Condition: used, Year of construction: 2020, operating hours: 546 h, Hyundai HX 10 A Micro Excavator - Incl. Atlas Copco chisel from year: 2010 Hnjdpfexiumbex Afiju - Operating hours: 502 hrs - LED work lights - Hydraulic chassis - Rotating beacon - Minimum width 70 cm Errors and prior sale excepted. Internal vehicle number: W30

Condition: used, New: Yes Empty weight: 1.050 kg Type number: HHDD100 HHDD100 1500RPM - 100KVA 400/230V 93lt 10.7 l/h 67DB 2770 X 1080 X 1450 MM Hnodpfx Afexhzk Reiju OEM : HHDD100 Article nr.: W304177003N-veiling Genset Hyundai 100KVA HHDD100

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 320 mm, spindle bore: 80 mm, bar diameter (max.): 70 mm, Complete with accessories as shown in the photo Hnodpsxhdvpsfx Afiju

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Hnedpsxdxhrjfx Afiou Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6-030, turning diameter over cross slide: 254 mm, turning length: 500 mm, spindle bore: 70 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 510 mm, overall weight: 4,300 kg, - Year of manufacture: 1996 - First commissioning: 1998 - Single owner, used in our own operation - Fully functional, powered and ready for demonstration Hnodpfx Afoxgtvcsisu - X-axis travel: 180 mm - Z-axis travel: 510 mm - Turning diameter: 254 mm - Turning length: 500 mm - Spindle speed: 3,600 rpm - Spindle bore: 70 mm - Spindle motor power: 15 kW - Control: Siemens 840 C - Chip conveyor - 8-position turret - 3-jaw chuck with hollow clamping cylinder - Fully automatic tool presetter - Dimensions: 2,600 x 1,650 x 1,830 mm – 4,300 kg Net price ex-works Luckenwalde (Germany), excluding transport

Condition: new, feed pressure 8 bar Effective free air delivery 125/85 L/min Receiver capacity 24 / 8 l / bar weight of the machine ca. 22,5 kg. Number of cylinders 2 Stk. motor 230V / 0,75KW V / KW range L-W-H 600 x 310 x 510 mm Exhibition machine!! This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: Hsdpou Imhisfx Afienu ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: used, Year of construction: 2023, operating hours: 522 h, ATTENTION VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance without exception. Hyundai HL 970A 4x4 - Including bucket - Tyres: 26.5 R25 - Radio - Operating hours: 522 - Reversing camera Hodpoxhbmfefx Afionu - Air conditioning - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W47 ATTENTION VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance without exception.

Condition: used, New: Yes Empty weight: 500 kg Type number: HHDD45 HHDD45 1500RPM - 45KVA Hsdpfxjxhy E To Afijnu 400/230V 93lt 10.7 l/h 67DB 2220 X 850 X 1033MM OEM : HHDD45 Article nr.: W304177004N-veiling Genset Hyundai 45KVA HHDD45

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, machine/vehicle number: 70TY5064, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,600 mm, total length: 1,640 mm, total width: 2,349 mm, table width: 380 mm, table length: 380 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 14, The Hyundai SPT-V30TD is a compact 3-axis vertical machining center designed for high-speed drilling, tapping, and light milling applications, typically found in precision component manufacturing environments. The machine features a robust structure and is equipped with a Yasnac CNC control—known for reliability and effective motion control. Main Specifications: Travel: X: 500 mm, Y: 300 mm, Z: 300 mm Spindle Speed: Up to 8000 RPM, with BT30 (ISO 30) spindle taper Table Size: 600 mm x 380 mm Max Table Load: 200 kg ATC: 14 tool capacity, carousel type Control: Yasnac J50M Machine Dimensions (L x W x H): 1640 x 2349 x 2600 mm Weight: Approx. 3500 kg Notable Features: Rapid traverse rates (X, Y, Z): up to 30 m/min Hnjdpfoxgdluex Afisu Dual table/pallet changer is sometimes featured, increasing productivity Compact footprint designed for efficient shop floor space use Suitable for drilling up to 20 mm, tapping up to M16, and various milling operations Machine need to be fixed. It shows fault 310: Servo Off.

Condition: used, Year of construction: 2011, operating hours: 5,735 h, 2011 | Hyundai R140W-9 | Used Wheeled Excavator | 5735 hours 📍Location: France, Limay 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 52 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Hnedpfx Asxdft Usfiou Machine was working at the time of inspection, except as noted. There are no buckets with the unit. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39275 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Technical condition: very good Visual appearance: very good Hjdpfx Afsxda H Neienu Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz Hnedpfxou Imnvs Afisu output voltage 2 x 230AC / 1 x 12DC V tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Pickup dates must be agreed upon in advance without exception. Hyundai HW 140A wheeled excavator - without attachments - tyres: 10.00-20 - radio - operating hours: 5 Errors and prior sale excepted. Hodpfx Afoxhbl Usienu Internal vehicle number: W38 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Pickup dates must be agreed upon in advance without exception.

Condition: used, New: No Empty weight: 8 kg Part suitable for: trucks Hodpjxhr Elsfx Afionu Type number: TM000A22501 HDL150 Detroit diesel OEM : TM000A22501 Article nr.: V151177001-veiling Used Starter Hyundai truck HDL150 12V

Condition: like new (used), Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, Hyundai WIA KF 5600C Machining Center (LIKE NEW) Hyundai WIA KF5600 C Hsdpfx Asxf Ey Dsfionu Commissioned: 2019 Table: 1250 x 560 mm 12,000 rpm X/Y/Z travels: 1100 x 560 x 635 mm 10.4” display Random magazine for 30 tools Internal coolant at 30 bar Chip conveyor Renishaw TS 27R probe PRICE AND FURTHER INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) Hnodpjulk D Isfx Afiju - Automatic tool exchange unit (ATC) Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) - Hydraulic unit - Axis Slide Cover - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: new, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, Year of construction: 2025, operating hours: 20 h, Equipment: air conditioning, Technical information Track width: 60 cm Empty weight: 21.200 kg Make of engine: 6BT5.9-C Top speed: 5 km/h Condition General condition: very good Hnedpfx Ajxda H Aefisu Technical condition: very good Visual appearance: very good Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 220 l/min Emission level: Stage II / Tier II Transport dimensions (LxWxH): 9,57x2,8x2,92 Production country: IN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V tank capacity 12 l engine output 7,0 PS Hedpfeu Imf Ujx Afionu weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine)

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception. Hyundai HL 975 A CVT 4x4 - Includes bucket - NEW VEHICLE - Tyres: 26.5 R25 - Radio - Operating hours: 32 - Rear-view camera - Air conditioning - Central lubrication system Subject to errors and prior sale. Hedpfxexhbmlj Afienu Internal vehicle number: W46 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel X: 1,000 mm Travel Y: 530 mm Travel Z: 510 mm Number of axes: 3 Hodpfoxcn N Aex Afienu Max. spindle speed: 10,000 rpm Table size – length: 1,200 mm Table size – width: 510 mm MACHINE DETAILS Control type: Fanuc Dimensions & weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Transport packages: 3 Motor power: 11.0 kW Operating hours: 3,010 h EQUIPMENT Documentation CE marking

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only partially possible. Collection dates must be agreed upon in advance. Hyundai HW 150 ACR Wheeled Excavator - without attachments - Tyres: 10.00-20 - Radio - Operating hours: 9 Subject to errors and prior sale. Internal vehicle number: W10 Hedpfx Aoxhblbjfienu ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only partially possible. Collection dates must be agreed upon in advance.

Condition: new, Year of construction: 2023, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Pickup dates must be arranged in advance without exception. Hyundai HL 970A XT 4x4 with bucket - Including bucket - Radio - Operating hours: 10 hrs - LED work lights - Transport width: 2.97 m - Engine power: 242 kW - Displacement: 8.9 L Hnedpfexhbkdex Afisu Errors and prior sale excepted. Internal vehicle number: W37

Condition: used, Year of construction: 2016, operating hours: 1,985 h, PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HL 970 4x4 - Incl. bucket - Tyres: 26.5 R25 - Radio - Operating hours: 1,985 - Reversing camera - Air conditioning - Central lubrication system Hnsdpfx Afoxhbigeiou Subject to errors and prior sale. Internal vehicle number: W50 PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: new, Year of construction: 2022, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 145A - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Hnodpfexhbiaex Afiou Internal vehicle number: W63 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL Hnedpfxoxhbhvs Afisu - New vehicle - Crawler excavator - Track drive - Without attachments - Radio - Operating hours: 15.7 - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.