Used Hydraulic Steady Rest for sale (15,397)

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Iedpexgdlnsfx Ahvsap Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system Iajdpfx Ajyupulshvop - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: ready for operation (used), sheet thickness steel (max.): 25 mm, back gauge: 1,500 mm, power: 66 kW (89.73 HP), total length: 3,390 mm, total width: 3,000 mm, total height: 3,500 mm, empty load weight: 25,000 kg, workpiece length (max.): 2,100 mm, CNC Elgo backgauge Adjustable cuttingedge: 0,3 > 3°30" Iodpfx Aheyuk S Ejveap

Year of construction: 1997, condition: used, functionality: fully functional, load capacity: 45,000 kg, 20/40‘ Hydraulic Spreader Condition: Ready for use and fully functional Technical Condition: very good Iedpfx Ahjwpm E Sjveap Description: In addition to this ELME model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Hire purchase & financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this CH 20-40. P.S.: Our master forklift workshop specializes in repair, restoration, overhaul, and custom-built forklifts from 8 tons upwards. We are also happy to put your vehicle on sale for you on commission at our place.

Year of construction: 2021, condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Bending length: 3050 mm Pressing force: 320 t Iaodpfxoyhdrre Ahvop Maximum pressure: 280 bar Motor power: 18.5 kW Oil tank capacity: 400 l Weight: 14,700 kg

Condition: new, bending length: 2100sheet thickness: 45prebending: 35Upper Roll Diameter: 430Side Roll: 390motor: 30messurements (LxWxH): 5200 x 2200 x 2500weight approx.: 19000 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Iajdpfx Aeytyy Nshvop - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 1,255 mm, installation height: 1,600 mm, operating speed: 9 mm/s, reverse speed: 85 mm/s, total length: 16,835 mm, total width: 5,695 mm, travel distance Z-axis: 900 mm, empty load weight: 370,000 kg, load capacity: 2,000,000 kg, passage width: 12,470 mm, table width: 800 mm, 9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Locking speed: 77 mm/sec Iajdpfx Ajytyp Rjhvep Electric motor (power): 2x 90 kW Height: 6750 mm (above floorlevel) Bending length: 14 000 mm

Condition: ready for operation (used), controller manufacturer: AMNC-PC Touch, throat depth: 420 mm, installation height: 470 mm, operating speed: 10 mm/s, total length: 5,840 mm, total width: 3,000 mm, total height: 2,900 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 200 mm, empty load weight: 11,300 kg, passage width: 3,760 mm, table width: 180 mm, 7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Iaedpfxeytyqbe Ahvjp Locking speed: 200 mm/sec

Condition: ready for operation (used), throat depth: 600 mm, installation height: 600 mm, operating speed: 7 mm/s, reverse speed: 46 mm/s, travel distance Z-axis: 300 mm, passage width: 5,050 mm, table width: 300 mm, Twee kantbanken van 6 meter kunnen samenwerken om materiaal van 12 meter te buigen. Kantbanken kunnen volledig worden gedemonteerd, zodat ze in containers kunnen worden vervoerd. Capacity: 1200 ton x 12 meter Backgauge: CNC Locking speed: 80 mm/sec Iedpfx Aoytyqnohvjap Electric motor (power): 2x 44 kW Weight: 124 ton (2x 62 ton)

Year of construction: 1978, condition: ready for operation (used), Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible. Ijdpfsyu T Dwox Ahvjap

Condition: used, Used special-purpose plant, built by ECKOLD (Special machine with superstructure for punch rivet brackets) Custom-built as a component feeder. Pictures of the components and motors. Motor brand: Behncke, 5.5 kW Rated power: 8.5 kW Iasdeyu S S Hopfx Ahvjp Hydraulic unit brand: FluTec, year 1999

Condition: excellent (used), machine/vehicle number: XLER4X20004430588, mileage: 1,063,292 km, power: 279 kW (379.33 HP), first registration: 05/2000, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2000, Equipment: ABS, differential lock, electric window regulation, fog lights, retarder, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Air - Sleeper cabin - Sper Ijdpfxjyu Sxye Ahvoap - Tipping hydraulics = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ Iedeyaik Dspfx Ahvsap 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, operating hours: 15,498 h, 2008 | Sennebogen 850R with hydraulic rotating grapple | Used Material Handling Excavator | 15498 hours Iaedex Ti T Hepfx Ahvep 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 47 approved ✅ 9 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Machine is operational with normal wear for 15,000 hours, some minor oil leaks. Turret brake needs inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, bending length: 4100sheet thickness: 25upper roll diameter: 460motor: 22messurements (LxWxH): 7200 x 2500 x 2200 mmweight approx.: 31000sheet length: 4100CY3R-HHS 460-40/25 – 3-Roll Hydraulic Plate Bending Machine Cone bending device for precise bending Induction-hardened rolls for long-lasting durability Digital display on both side rolls Robust machine body made of ST-52 steel construction Separate control panel for convenient operation All rollers mounted on bearings for smooth performance Drop end controlled from the control panel, allowing easy release of bent metal sheets and lifting of the upper rolls Roll movement and parallelism adjustment fully controlled via the control panel Iajdpfx Aod Ab Spjhvjp All rolls driven by separate hydraulic motors with planetary gearboxes CE-compliant, meeting European safety standards

Condition: new, sheet length: 2100sheet thickness: 40prebending: 30Upper Roll Diameter: 390Side Roll: 360motor: 22messurements (LxWxH): 4900 x 1950 x 2200weight approx.: 17000 Technical specifications: Iaodpfjd Ab Syex Ahvsp - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 3.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 11.900,00 Side supports EURO 8.250.00 We have many references!

Condition: used, Year of construction: 2004, total height: 2,620 mm, total width: 1,450 mm, total length: 2,650 mm, Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 180253 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 150 - Max. stroke [mm]: 340 - Table width [mm]: 1570 - Ram length [mm]: 280 - Ram width [mm]: 200 - Height adjustment [mm]: 800 - Pressing speed [mm/s]: 5 - Column spacing width [mm]: 1570 - Transport dimensions: 2650mm x 1450mm x 2625mm (l x w x h) - Transport weight [kg]: 2500kg Iajdoytghtopfx Ahvsp - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), mileage: 123,064 km, power: 368 kW (500.34 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 29,500 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, power assisted steering, retarder, seat heater, second fuel tank, = Additional options and accessories = - Bluetooth - Speed limiter - Air conditioning - Air-suspended seats - Rear view camera - Sleeper cab - Side skirts - Preheating system - Xenon lighting = Further information = Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 8,000 kg; Steering; Tire tread left: 70%; Tire tread right: 70% Iedpfsxyx Epox Ahveap Rear axle 1: Max. axle load: 11,500 kg; Tire tread left: 70%; Tire tread right: 70% Rear axle 2: Differential lock; Max. axle load: 7,500 kg; Tire tread left: 70%; Tire tread right: 70% Technical condition: Very good Damages: None

Condition: good (used), mileage: 111,669 km, power: 368 kW (500.34 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 29,500 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, power assisted steering, retarder, seat heater, second fuel tank, = Further options and accessories = - Bluetooth Iodpsxr Upbsfx Ahvsap - Speed limiter - Air conditioning - Air-suspended seats - Reversing camera - Sleeper cab - Side skirts - Warm-up automatic system - Xenon lighting = Further information = Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 1: Max. axle load: 11,500 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Differential lock; Max. axle load: 7,500 kg; Tyre tread left: 70%; Tyre tread right: 70% Technical condition: Very good Damages: None Contact Job van Eldik for further information.

Condition: good (used), Year of construction: 2011, In good technical condition and fully operational. Year of manufacture: 2011. Maximum cutting length: 3100 mm. Maximum sheet capacity: 11373 up to 6 mm. Cutting blades: INOX. Automatic adjustment of cutting clearance and blade angle. CNC control: Safan Touch Screen TS100. Iajdjytb Izjpfx Ahvep Machine weight: approx. 6 tons. Accessories: 2 x additional sets of INNOX spare blades (one set brand new) 1 x set of spare pistons 1 x spare computer TS201C (new – unused)

Condition: good (used), functionality: fully functional, Year of construction: 2012, Expected in stock in approx. 3 weeks Safan M Shear 310 - 6 Capacity: 3100 x 6 mm Iasdpfxoytb Tdo Ahvsp TS1 Inox Touch control Return to sender Extra long back gauge of 1500 mm Scrap flap option Year of manufacture: 2012 Images are of another identical machine.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used 3 meter guillotine shear by Volz Eurocut (Romanian manufacture) Model: Eurocut 6.5 Capacity: 3100 x 6.5 mm Electric back gauge Adjustable cutting angle Year of manufacture: 1994 Iaodpsytb Rpsfx Ahvop

Condition: used, functionality: fully functional, Year of construction: 1980, Used 3 meter guillotine shear by Haco Model: Toolmaster 36 Capacity: 3100 x 6 mm Adjustable backgauge Iasdeytb Inopfx Ahvep Year of manufacture: 1980

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used 3-meter guillotine shear from Amada Model: GPS 630 Capacity: 3100 x 6 mm Electric back gauge Iodpfxsytbxts Ahveap Year of manufacture: 1994

Condition: good (used), Electro-hydraulic frame press Manufacturer: Hess Model: Hydro Nummer 1 Iaodpeyux Uuofx Ahvsp 1.1 kW Press dimensions: max. 3550 x 2550 mm The machine is in good condition.