Used Hurco Vmx 42 for sale (159)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Kdedpow Nklhsfx Ah Nog Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door Kdedpetrhq Hjfx Ah Nsg - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: Kdsdpfx Aherxfxhj Njg max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 102 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,125 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 15,000 W, spindle nose: Big Plus ISO 40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available from stock. Transport from the warehouse in the Netherlands or Czech Republic by the buyer. Other machine sizes available including screw chip conveyor and all software options such as • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touch screen monitor • 120 GB solid state hard drive • 4 GB RAM memory • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop optional accessories: IKZ cooling through the spindle 20 bar, with rotary union and additional tank with filter Programmable air cooling through the spindle IKZ preparation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ preparation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis model TDE-MV-200 complete with controller and motors LCM 4th Axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors and cables 4th Axis Electrical Package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-200 (200mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-250 (250mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics TS-A135 Tailstock For M-170 rotary table Kdjdpfox Akgwjx Ah Nsg Milltronics TS-A160 Tailstock For M-200 rotary table Milltronics TS-B185 Tailstock For M-250 rotary table 180 mm three-jaw chuck with adapter flange (For Milltronics rotary tables only M-170 and M-200) 230 mm three-jaw chuck with adapter flange (only for Milltronics rotary tables M-250) Tsudakoma 4th axis model RNE-160R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis model RNE-200R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool measuring probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool measuring probe with optical signal transmission and macros Renishaw NC4-F300 contactless tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block of 4 Programming manual in paper format Machine manual in paper format

Condition: as good as new (ex-display), Year of construction: 2023, Control : Sonstige Hurco Max 5 Spindle Speed : 12,000 U/min Power : 11 kW Holder : SK 40 Torque : 61 Nm In general Travel X : 660 mm Travel Y : 406 mm Ksdpfolf E Aisx Ah Nsdg Travel Z : 508 mm Rapid traverse X/Y/Z: 28 m/min Table : 762 x 406 mm Table load : 1,500 kg

Condition: good (used), Year of construction: 2017, Machine has 2,500 spindle hours Hurco VM 30 i, Year of manufacture: 2017, Control: Winmax 5, Travel X/Y/Z 1100/510/510 mm, Tool changer with 20 stations, Taper SK 40, Kjdpfxoxzch Do Ah Nsdg Spindle speed up to 10,000 rpm, DXF interface, High-pressure cooling IKZ 15 bar, Chip conveyor, Vacuum clamping system as new – 1 month old,

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: VMX106205017CHB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 457 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: Ultimax 4 system version 2.37.01e (Patch F) / 2.6.04i Table dimensions: 760 mm x 355 mm Travel X: 660 mm Travel Y: 355 mm Travel Z: 457 mm Spindle Spindle speed: 10 - 10,000 rpm Clamping device holder: SK40 Feed rates Rapid traverse X/Y: 22,500 mm/min Rapid traverse Z: 3,810 mm/min Tool changer Tool changer: 20-way Kdedpjxy Nq Aefx Ah Neg MACHINE DETAILS Floor area (L x W x H): 2,600 mm x 1,600 mm x 2,500 mm Weight: approx. 3 t

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 600 mm, Vertical machining center Manufacturer: HURCO Bebmmvyoubcvtjhwslf Type: BMC 40 / 50 Travel: X-axis 1020 mm Y-axis 762 mm Z-axis 600 mm Table load: 1500 kg Table size 1465 x 870 mm Spindle speeds 30 - 4000 RPM 30-station tool changer Tool-to-tool speed 8 sec. 2000 RPM Spindle mount SK 40 Voltage 400 Drive power 11.2 kW Weight 8000 kg Kdjdpfx Ahowag Tqs Nog Dimensions L x W x H = 3860 x 3315 x 2775 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] - Machine weight : 3360 [kg] Kodpjuhbubjfx Ah Nsdg MACHINE HOURS - Number of working hours : 22000 [h] EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Kjdpjxtfz Dsfx Ah Nsdg Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 11 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,300 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available ex stock. Transport from warehouse in the Netherlands or Italy to be arranged by the buyer. Further machine sizes available. => Installation and commissioning available upon request. Including auger chip conveyor and all software options such as: • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touchscreen monitor • 120 GB solid state drive • 4 GB RAM • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop Optional accessories: IKZ – Through-spindle coolant 20 bar, with rotary union and auxiliary tank with filter Programmable air cooling via spindle IKZ pre-installation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ pre-installation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis Model TDE-MV-200 complete with controller and motors LCM 4th axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors, and cables 4th axis electrical package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-200 (200mm) rotary table with servomotor and cable (requires 4th axis electrical package) Milltronics M-250 (250mm) rotary table with servomotor and cable (requires 4th axis electrical package) Kjdsxwyzyopfx Ah Nedg Milltronics TS-A135 tailstock for M-170 rotary table Milltronics TS-A160 tailstock for M-200 rotary table Milltronics TS-B185 tailstock for M-250 rotary table 180 mm three-jaw chuck with adapter flange (only for Milltronics M-170 and M-200 rotary tables) 230 mm three-jaw chuck with adapter flange (only for Milltronics M-250 rotary table) Tsudakoma 4th axis Model RNE-160R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis Model RNE-200R with motor (4th axis electrical package must also be ordered) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool setting probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool setting probe with optical signal transmission and macros Renishaw NC4-F300 non-contact tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block with 4 units Programming manual in paper format Machine manual in paper format

Condition: excellent (used), Year of construction: 2007, Vice NOT included Kdodpfx Ahexwlx Dj Nsg Comes with a small selection of tooling. X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 920 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, HURCO WinMax Dual CNC TRAVELS Longitudinal travel: 3.200 mm Transverse travel: 2.100 mm Vertical travel: 920 mm Kdjdpfx Aoxtqtloh Nsg WORK AREA Table dimensions: 3.000 x 1.700 mm Table load capacity with uniform distribution: 11.000 kg SPINDLE Maximum spindle power: 60 kW (1 min) Maximum spindle torque: 570 Nm at 1.000 rpm (1 min) Maximum spindle rotation speed: 6.000 rpm Tool holder: ISO 50 DIN 69871 Machine complete with: • 40-station tool magazine • Digital motors and drives (axes and spindle) • Thermal conditioning system for headstock temperature control • Coolant system with supply around the spindle • Water wash gun and water gun Compressed air • Chip evacuation system consisting of a double auger and evacuator • Complete enclosure • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS Kodpsxg D A Hjfx Ah Nodg H-TS8034 Year of manufacture: 2011

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Kdodpfxov Suwio Ah Nsg Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Movement X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 610 mm Travel distance Y :510 mm Travel distance Z: 610 mm Number of axis: 4 Kdsdpfoxdnkcex Ah Njg milling machine / machining center spindle revolutions: 12000 rpm table size X: 760 mm table size Y: 510 mm max. workpiece weight: 1000 kg input Power : 9 kW Control unit Ultimax 4

Condition: used, Year of construction: 2014, turning diameter over bed 0508 mm turning length 724,5 mm control Ultimax Hurco turning diameter over bed slide 336 mm spindle turning speed - stepless 0- 4500 U/min- rpm spindle bore 65 mm feeds 0-30 m/min rapid power traverse in X-and Z direction 30 m/min voltage 400 V connected load 30 KVA face slide travel 203,2 mm longitudinal travel 580/640 mm dimensions of the machine ca. 4,3 x 2,1 x 2,6 m toolpiece turning speed range 0- 5000 U/min Kdjdpfx Asv T Np Ash Njg work piece power 5,5 kW main drive motor 15/22 kW weight of the machine ca. 5,6 t c-axis 360 x 0,001 ° With 12 position turret head with live tooling (C- axe), sub spindle, power chuck, cooling arrangement and chip conveyor. Control: Hurco Ultimax. With many accessories.

Condition: used, Year of construction: 2017, operating hours: 1,200 h, functionality: fully functional, turning diameter over cross slide: 256 mm, turning length: 527 mm, spindle bore: 52 mm, spindle speed (max.): 4,800 rpm, Equipment: rotational speed infinitely variable, Description: For sale is a HURCO TM8i VDI CNC lathe with MAX5 single control, year of manufacture 2017, with only approx. 1,200 operating hours. The machine is in excellent condition, has been regularly serviced, and is immediately ready for operation. Ideal for precise turning applications in small and medium-sized batch production. Accessories / Equipment: • Tool presetter • Chip conveyor • Coolant system Kdsdpfjxfgkkex Ah Neg • Three-jaw chuck • Collet chuck with various collets • Mist extraction unit Condition: • Lightly used (only 1,200 hours) • Regularly serviced • Immediately available • Inspection by appointment possible

Condition: excellent (used), Year of construction: 2011, operating hours: 2,400 h, functionality: fully functional, turning length: 340 mm, turning diameter: 254 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 355 mm, Working length 340 mm Max. working diameter 254 mm Swing over bed 405 mm Spindle speeds 6.000 rpm Spindle bore 45 mm Number of tools 12 pcs X-axis travel 170 mm Z-axis travel 355 mm Control MAX Kedpfsxcx I Nsx Ah Nsdg Running hours 2400 Main motor power 11 Kw

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 704-0101-809, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-axis: ± 30° / 110° Kjdpfxexamfkj Ah Nsdg Rapid traverse A-axis: 16.5 m/min C-axis: 360° Rapid traverse C-axis: 16.5 m/min Spindle Speed range: 10 - 12,000 1/min Spindle motor: 18 kW Tool Tool holder: SK 40 Tool stations: 32 Working area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Space required (LxWxH): 2.700 m x 4.000 m x 3.250 m

Condition: used, Year of construction: 2020, Used 2020 Hurco TM10i CNC Lathe in great condition with low spindle hours and a full service history. Fitted with Hurco WinMax Control for fast, efficient programming and seamless machining operations. The machine can be seen under power in our showroom. Compact, high-performance lathe designed to meet your production requirements. - Hurco WinMax Control – Advanced, user-friendly CNC system designed for ease of operation and enhanced productivity - High-Performance Spindle – Direct drive spindle offers excellent torque and smooth operation for superior surface finishes - Rigid, Heavy-Duty Construction – Ensures exceptional accuracy and long-lasting performance Machine Specification: CAPACITY - Distance Between Centers: 29.29 in (744 mm) - Swing Over Bed Diameter: 22.9 in (582 mm) - Swing Over Cross Slide Diameter: 15.8 in (402 mm) - Max Turning Diameter: 17.7 in (450 mm) - Max Turning Length: 29.84 in (758 mm) - Max Bar Capacity: 3.0 in (76 mm) - X, Z Axis Travel: 9.8 x 31.1 in (250 x 790 mm) Kdedpswkwdhefx Ah Njg SPINDLE - Max Spindle Speed: 3,000 rpm - Max Torque (High Gear): 217.61 ft/lb @ 600 rpm (295.9 Nm @ 600 rpm) - Spindle Power: 24.81 hp (18.5 kW) - Spindle Nose: A2-8 - Chuck Diameter: 10 in (260 mm) TURRET - Tool Type: Slotted Disc - Tool Capacity: 12 Stations - Turret Index Time (Adjacent): 1.3 seconds - Turret Index Time (Furthest): 3.6 seconds FEEDRATES - Rapid Traverse (X, Z Axis): 1,181 in/min (30 m/min) SIZE - Max Operating Floor Space: 192.15 x 112.36 in (4,881 x 2,854 mm) - Machine Height: 87.89 in (2,233 mm) - Machine Weight: 11,054 lbs (5,014 kg) - Parts Catcher Dimensions: 8.3 x 5.0 x 3.5 in (210 x 127 x 88 mm) This Hurco TM10i CNC Lathe is a versatile and powerful machine, ideal for high-precision turning tasks. Its robust design, quick cycle times, and advanced control system make it perfect for both small and large production runs. For more information or to schedule a viewing, please contact us. Control: Hurco Winmax Spec: Spindle bore 76 mm | Max Swing 582 mm | Travel X 250 Z 790 mm Accessories: Tailstock, tool setter, parts catcher & swarf conveyor

Condition: used, Year of construction: 2020, Used 2020 Hurco TM8i CNC Lathe in great condition with low spindle hours and full service history. Equipped with Hurco WinMax Control for easy programming and high-speed machining. The machine can be seen under power in our showroom. Compact, high-performance lathe designed to meet your production requirements. - Hurco WinMax Control – Advanced, user-friendly CNC control system designed for maximum productivity and ease of use - High-Performance Spindle – Delivers smooth, stable operation for exceptional turning precision - Rigid Construction – Designed for reliable performance and accuracy over the long term Machine Specification: CAPACITY - Distance Between Centers: 23.49 in (597 mm) - Swing Over Bed Diameter: 20.67 in (525 mm) - Swing Over Cross Slide Diameter: 11.8 in (300 mm) - Max Turning Diameter: 14 in (356 mm) - Max Turning Length: 20.67 in (525 mm) - Max Bar Capacity: 2.5 in (64 mm) - X, Z Axis Travel: 8 x 21.65 in (203 x 550 mm) SPINDLE - Max Spindle Speed: 4,000 rpm - Max Torque (High Gear): 133.83 ft-lb @ 1,000 rpm (100.7 Nm @ 1,000 rpm) - Spindle Power: 25.48 hp (19 kW) - Spindle Nose: A2-6 - Chuck Diameter: 8.2 in (210 mm) TURRET - Tool Type: Slotted Disc - Tool Capacity: 12 Stations - Turret Index Time (Adjacent): 1.3 seconds - Turret Index Time (Furthest): 3.6 seconds FEEDRATES - Rapid Traverse (X, Z Axis): 1,181 in/min (30 m/min) SIZE Kdodpjwkwdnofx Ah Neg - Max Operating Floor Space: 170.7 x 122.6 in (4,336 x 3,114 mm) - Machine Height: 86.32 in (2,193 mm) - Machine Weight: 8,885 lbs (4,030 kg) - Parts Catcher Dimensions: 5.9 x 3.7 x 2.8 in (150 x 95 x 70 mm) This Hurco TM8i CNC Lathe is perfect for businesses seeking a compact yet powerful machine for precision turning tasks. Its advanced control system and rigid construction ensure high-quality results and increased productivity, making it ideal for both small and medium production runs. For more details or to schedule a viewing, please contact us. Control: Hurco Winmax Spec: Spindle bore 64 mm | Max Swing 356 mm | Travel X 203 Z 550 mm Accessories: Tailstock, tool setter, parts catcher & swarf conveyor

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Kodpfxspiay Ss Ah Njdg Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Kdsdpjw Tdiusfx Ah Neg Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: S10-1622378FKBCH, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Table length: 762 mm Table width: 406 mm Table load: 682 kg Table clamping area (L × W): 762 × 406 mm T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose to table: 102 – 610 mm Spindle Max. spindle speed: 12,000 rpm Ksdowd Nwyspfx Ah Nedg Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: 40 mm Speed control: infinitely variable Feed and rapid traverse Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Tool magazine Magazine positions: 20 Tool holders (SK40): not included Tool diameter: 89 mm Tool length: 250 mm Tool weight: 7 kg Accuracy Positioning accuracy (Pmax.): 0.01 mm Repeat accuracy (Ps): 0.005 mm Control system Control system manufacturer: HURCO MACHINE DETAILS Connected load: 15 kVA Operating voltage: 400 V, 50 Hz Weight: 2.85 t Footprint without internal cooling: 3.4 x 3.2 m Machine dimensions: 2.1 x 1.8 x 2.6 m Transport dimensions: 1.96 x 2.3 x 2.39 m EQUIPMENT - Continuously variable speed Adjustable - Digital technical documentation can be accessed via the control system - Without mounted machine vices and the tool holder and tool mounted in the spindle